Year of construction: 1991, Condition: ready for operation (used), Pressing force: 180kN, total stroke: 250mm, power stroke: 12mm, max. compressed air supply: 6bar. Dcob E Sjq Tqrfewr Teg

Year of construction: 2001, Condition: ready for operation (used), Screw diameter: 30mm, connected load: 42kW, operational hours counter pump/ automatic: 73,384/ 64,491h, with control software version 3.080, an on-site inspection is possible. Dceb Eorcmx Hs Swr Tog

Condition: ready for operation (used), Circumferential speed: 80m/s, an on-site inspection is possible. Dsborp E Nnj E Swr Tocg

Condition: ready for operation (used), Year of construction: 2009, There are 3 identical Maag FSC 160 screen changers available. Screen diameter min./max.: 600mm/200mm, screen area min./max.: 28cm²/314cm², throughput min./max.: 100-1700kg/h, max. temperature tolerance: 300°C, operating pressure: 700bar, differential pressure: 100bar. Documentation available. Dceb E Swott Slyjr Teg

Year of construction: 1998, Condition: ready for operation (used), Clamping force: 500kN, screw diameter: 30mm, injection volume: 101cm³, injection weight: 92g, injection pressure: 1488bar, clamping plate dimensions X/Y: 540mm/540mm, distance between tie bars: 321mm, mold opening: 350mm, mold height min./max.: 200mm/550mm, weight: approx. 2300kg. Including 1 hydraulic core puller. Dcobetw Durj E Swr Tsg

Year of construction: 2013, Condition: ready for operation (used), Clamping force: 250kN, distance between tie bars: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, screw diameter: 25mm, injection volume: 49cm³, injection weight (PS): 45g, injection pressure: 2000bar, cores: 2+5, heating zones: 12, pump hours: 2388h, automatic operation: 1600h. Including Multilift H with B-axis, clean room module. Dobotyax Eo E Swr Tocg

Year of construction: 1999, Condition: ready for operation (used), Clamping force: 2000kN, tie bar distance: 520mm/520mm, platen size: 715mm/715mm, min. installation height: 250mm, max. platen distance: 900mm, max. opening stroke: 650mm, max. ejector stroke: 225mm, max. ejector force: 66kN. Screw diameter: 45mm, injection weight: 240g, injection pressure: 250bar, stroke volume: 254cm³. Machine dimensions X/Y/Z: approx. 6500mm/1700mm/2200mm, weight: approx. 6700kg, control: Selogica 3.090, operating hours: over 100,000h. On-site inspection is possible. Dceb E Sjvnd Txswr Tog

Condition: ready for operation (used), Year of construction: 2008, A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible. Deb E Swjt Eu Azjr Tecg

Year of construction: 2013, Condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible. Dob E Swjt E Trbsr Tocg

Year of construction: 2003, Condition: ready for operation (used), Clamping force: 13000kN, tie bar distance X/Y: 1600mm/1250mm, installation height min./max.: 650mm/1400mm, opening stroke: 1680mm, screw diameter: 100mm, stroke volume: 3900cm³, control: Unilog B4, operating hours: 44450h. Including linear robot Bettenfeld R15, Euromap, Europaket, various interfaces, various Mouldmaster and core pulls. 1x core pull valve and flat surface nozzle defective. Documentation available. Dceb E Sjt Eu Dlswr Tog

Year of construction: 2012, Condition: ready for operation (used), Installation height min./max.: 200mm/550mm, opening stroke: 350mm, closing force: 350kN, screw diameter: 20mm, distance between tie bars: 270mm, max. injection volume: 31cm³, operating hours: 61737h. Documentation available. On-site inspection is possible. Dcsb E Swret E Tq Ds Teg

Year of construction: 2018, Condition: ready for operation (used), Number of heating cartridges: 24, heating cartridge average and length: 12.5mm/200mm, power: 630W, 230V, including resistance thermometer type PT100, heating time to 350°: 40min. Dimensions X/Y/Z: 1900mm/2100mm/3040mm, weight: approx. 2200kg. Documentation available. Dcsb E Swjtp Nacsr Teg

Year of construction: 1993, Condition: ready for operation (used), An agglomerator for processing plastic shredded material is available. Output LDPE: 500kg/h, output OPP: 300kg-400kg/h, output TPO: 300kg-400kg/h, control: Siemens S5-95U. On-site inspection is possible. Dcobsu U Nqws E Swr Tog

Condition: ready for operation (used), Year of construction: 2008, A Krauss Maffei linear device (handling) for injection molding machines is available. Travel X/Y/Z: 1500mm/2500mm/4000mm, load capacity: 30kg, vacuum: 4x, compressed air: 3x, weight: approx. 650kg, operating hours: 69100h. The Y-axis is slightly skewed. Documentation available. On-site inspection is possible. Dcobou St I Do E Swr Teg

Year of construction: 2013, Condition: ready for operation (used), Five KLN and Rudholzer welding and hot riveting machines are available. 1/2) KLN WNA-W, year of construction: 2012/13, power: 11kW, frequency: 25kHz, machine dimensions X/Y/Z: approx. 2700mm/2000mm/2500mm, control: Siemens Simatic S7. 3/4/5) Rudholzer hot riveting machine, year of manufacture: 2016, control system: Siemens PLC. On-site inspection is possible. Dcsb E Sougmxvowr Tsg

Condition: ready for operation (used), Heating output: 2000W, ultrasonic frequency: 40kHz, weight: 275kg. Djb E Swrevvu N He Tecg

Condition: ready for operation (used), Year of construction: 2006, Power: 1.5kW, materials: plastic/aluminum, intended use: welding and machining processes, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1800mm, weight: approx. 150kg. Including accessories. On-site inspection is possible. Djb E Swjukhz Ier Tjcg

Year of construction: 2002, Condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Dceb E Swjum U S Eor Tog

Year of construction: 2011, Condition: ready for operation (used), A rotational molding machine consisting of 2 rotational units and an oven in between. Rotation unit: Weight: 7500kg, weight with load: 11500kg, on 8 350mm x 350mm base plates. Rotation unit diameter: 3300mm. Compressed air nozzles: Pneumatic connection: 1inch, water connection: 0.5inch, 6bar, height: 1500mm. Oven: Dimensions X/Y/Z: approx. 5800mm/4200mm/6800mm, weight: approx. 27000kg, max. temperature: 400°C. Documentation available. Deb E Swror Eqvdo Tscg

Year of construction: 1997, Condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Djb E Swrjrc Hibj Tjcg

Year of construction: 2015, Condition: ready for operation (used), There is a complete pultrusion line with three Krauss Maffei RimStar Nano pumping machines, three creels, ABUS column-mounted slewing jib crane and a KraussMaffei EW 2300 CFI winder, tensile force: 10t, max. profile dimensions: 300x50mm, max. speed: 4m/min, on-site inspection is possible. Deb Eeriurbo Swr Tecg

Year of construction: 2009, Condition: ready for operation (used), Clamping force: 1000kN, column distance X/Y: 420mm/420mm, mold height min./max.: 200mm/800mm, platen size X/Y: 620mm/620mm. Screw diameter D25/D35: 25mm/35mm, max. injection volume D25/D35: 90cm³/173cm³, max. injection pressure: 2500bar, injection speed: 160mm/s. Including various accessories, including D25 and D35 units. Dimensions X/Y/Z: approx. 4500mm/2200mm/1700mm, weight: approx. 5300kg, control: Arburg Selogica, operating hours: 1798h. Documentation available. Dsb E Swstthr Nor Tocg

Condition: ready for operation (used), Year of construction: 2008, A complete StyroDesign EPS cutting system is available. The Styrodesign EPS cutting system is ideal for precise cutting of foam materials. Equipped with modern STYRODESIGN software, it offers optimum material utilization through advanced cutting path definition and nesting techniques. Documentation available. Dcjb E Swetndwxjr Tjg

Year of construction: 1990, Condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Dcsb Eovw Aqhs Swr Tjg

Year of construction: 1990, Condition: ready for operation (used), Motor power: 80kW, insertion diameter: 70mm, screw diameter: 70mm, speed: 300rpm, heating zones: 3(7kW/7kW/5kW), dimensions X/Y: approx. 5000mm/900mm, weight: approx. 5700kg. Including 2 pairs of screws, cooling roller mill MPM, year of construction: 2020. Dob E Sjtxb Dmewr Tecg