Condition: like new (used), Year of construction: 2019, Clamping force: 50 t Min/Max mould height: 150-550mm Cgobevcxuas Engtyet Platen size HxV: 500x450mm Screw diameter: 30 mm Maximum injection capacity: 99cm3 Robot Engel ER-USP 5 Conveyor belt Material used: POM, PA low hours, very nice condition

Year of construction: 2020, Condition: ready for operation (used), General Data Machine weight 28400 kg Additional Equipment The robot + auto line are not included. These PIOVAN accessories are included: Piovan Hot Air Dryer G35 / Piovan Suction Unit PF30 / 3x Piovan Temp Unit THW118-F (+1x brand new unused temperature unit) This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine. Cjb Engsvw Em Sjtysgt Application Types Injection Moulding

Year of construction: 2013, Condition: ready for operation (used), An Arburg injection molding machine including a handling interface is available. Clamping force: 800kN, min. mold installation height: 250mm, max. mold installation height: 550mm, distance between tie bars: 470mm/470mm, clamping platen diameter: 125mm, ejector stroke: 125mm, injection weight: 132g, screw diameter: 35mm, injection pressure: 2000bar, core pulls: 1, total power requirement: 45.5kW, weight: approx. 4600kg. Documentation available. On-site inspection is possible. Cgsb Engtov Tny Tsyst

Condition: used, Year of construction: 2005, operating hours: 70,000 h, Functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Cgob Engtsu Awaleyot Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: used, Functionality: fully functional, The hot runner device is for sale, it has 5 heating zones Cgob Esvxz Nfjngtyjt

Condition: excellent (used), Year of construction: 2000, Vertical injection molding machine Clamping force: 250 kN Csb Esv Eqgysngtyegt Plate size 342 x 250 mm Screw diameter 20 mm

Year of construction: 2023, Condition: like new (used), SEPRO Success 22X (2023) X = 2000mm Z = 1400 mm Y = 700mm C axe : YES Payload : 10kg Cgjb Enov Ift Hogtyst Vacuum circuid: 2x Pressure circuid: 2x

Year of construction: 2005, operating hours: 92,980 h, Condition: ready for operation (used), This Engel Victory 750/200 Tech hydraulic injection moulding machine was manufactured in 2005. Consider the opportunity to buy this Engel Victory 750/200 Tech hydraulic injection moulding machine. Contact us for more information. Ceb Engtov Dym Hoysgt Application Types Injection Moulding

Year of construction: 2016, Condition: ready for operation (used), An Arburg injection molding machine including handling is available. Clamping force: 4000kN, opening stroke: 700mm, min. mold installation height: 350mm, distance between tie bars: 820mm/820mm, clamping platen diameter: 160mm, ejector stroke: 250mm, injection weight: 1078g, screw diameter: 70mm, injection pressure: 2000bar, core pulls: 2, total power requirement: 124kW. Documentation available. On-site inspection is possible. Csb Engev Tny Hetyogt

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1300 mm Mould height min 650 mm Max. daylight 1950 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 90 / 35 mm Ls/D ratio 18 / 23 Injection pressure 1445 / 2429 bar Stroke volume 1813 / 156 ccm Shot weight (PS) 1650 / 142 gr. Injection rate 649 / 123 ccm/s Screw speed 218 / 291 1/min Plasticising rate max. 137 / 22 g/s Nozzle pressure 173 / 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 36 / 18,5 kW Adjustable barrel heating zones 7 / 5 Dimensions and weights: Dimensions of the machine ca. 8,70 x 5,10 x 2,60 m Cgjb Engsv Stcwetyjt Total machine weight 35000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 48 x hotrunner controller - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Engel ES 200 | 50 HL Cgob Enev Abvgsgtyet Always used in a school. Very low hours. Machine can be loaded.

Condition: used, Functionality: fully functional, The Rapid brand grinder is for sale; 3 axles 2 knives each which are good Impeller available Cgjber Axcbo Engtyjt

Condition: repair required (used), Functionality: not functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from the Arburg brand and the type 470 C 1600-800 The pump and a card have been removed from the machine, so the machine is being sold as defective. It is otherwise in very good condition Technical data: Pump hours: 61,400 Clamping force: 1600 kN Clear column spacing: 470*470 Ejector travel: 225 mm Screw diameter: 50 mm Displacement: 398 cm³ Dimensions: 4335*1635*1950 mm Weight: 6950 kg The machine is offered without peripherals Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Cjb Engtsv Edrieyogt Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1610 Measurements depth 5820 Measurements height 2010 Machine weight 8200 Injection Unit Screw diameter 60 mm Shot weight 651 g Stroke volume 715 cm^3 Injection pressure 1556 bar Clamping Unit Clamping force 2500 kn Csb Engtov Ezqceyogt Opening stroke 1150 mm Distance between bars 580 x 580 mm Mould height max 600 mm Size of mold platens 860 x 860 mm Ejector stroke 160 mm Ejector force for / back 67 kn Additional Equipment Equipped with a servo drive - energy saving energy 30-70% compared to a machine with a constant pump 2x sequences of core pullers EUROMAP 67 interface This INVERA Intec 250/1110 was manufactured in 2016. A hydraulic injection moulding machine featuring a screw diameter of 60 mm and a clamping force of 2500 kN. It supports a max mold weight of 850 kg and is equipped with a servo drive, offering energy savings of 30-70%. Ideal for efficient, high-quality molding operations. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2008, Condition: ready for operation (used), Two similar Battenfeld injection molding machines are available, each with a core pull. 1) Battenfeld HM 1000/750, year of manufacture: 2004, tie bars: 4, clamping force: 1000kN, opening stroke: 500mm, hole spacing extension: by 300mm, min. mold installation height: 250mm, tie bar spacing: 520mm/470mm, clamping table diameter: 125mm, ejector stroke: 150mm, heating capacity: 14kW, injection weight: 400g, screw diameter: 45mm, injection pressure: 2100bar, total output: 36kW, machine weight: approx. 4600kg. Handling included. 2) Battenfeld HM 1000/750, year of manufacture: 2008, tie bars: 4, clamping force: 1000kN, opening stroke: 500mm, min. mold installation height: 250mm, tie bar distance: 470mm/420mm, clamping table diameter: 125mm, ejector stroke: 150mm, heating power: 14kW, injection weight: 500g, screw diameter: 50mm, injection pressure: 1714bar, total power: 36kW, machine weight: approx. 4600kg. Documentation available. On-site inspection is possible. Cjb Enev Tnzdsgtyjgt

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate Cgjb Engsv Stbmjtyst - Robot interface according to EUROMAP 67

Condition: new, Functionality: fully functional, - Single screw extruder - 25/25 LD screw Cjb Engtjrg Ebcoyegt - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off - Control system

Condition: used, Functionality: fully functional, Two YUDO "Bold 3" hot runner units are available for sale. The unit has 12 hot zones and a 63A plug. Spare parts are still available, and a user manual is also available for this unit. L: 150 mm Cgsb Engjv Smnaotyjt W: 100 mm H: 80 mm

Year of construction: 2010, Condition: used, HB THERM 140 Z 2 (2010) Measurement range 0–400 °C Resolution 0.1 °C Regulation accuracy ±0.1 K Tolerance ±0.8 K Flow measurement Measuring range 0.4–40 l/min Cgob Engtov H Ad Hoyjt Resolution 0.1 l/min Regulation accuracy ±0.1 l/min Tolerance ±(5% of measured value + 0.1 L/min) Pressure measurement Value Unit Measuring range 0–20 bar Resolution 0.1 bar Tolerance ±5% of final value Technical data O8360-CS 2023-08 25 3.2 Emission value unit Permanent sound pressure level 55 °C 3.3 Operating conditions Temperature range 5–40 °C Relative humidity* 35–85 % RH Minimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 39,626 h, General Data Machine weight 11600 kg Injection Unit Screw diameter 50 mm Shot weight 361 g Injection pressure 392 cm³ Cgsb Enevyl R Aegtyjt Clamping Unit Clamping force 2200 kN This Engel Victory 750H/330V/220 combi was manufactured in 2011. It's a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Engel Victory 750H/330V/220 combi. Contact us for more information. Application Types Injection Moulding

Condition: refurbished (used), Year of construction: 2009, operating hours: 1,000 h, Functionality: fully functional, machine/vehicle number: 121069, input voltage: 400 V, overall weight: 550 kg, B SYSTEM 60 Machine Features: - Total flow rate (min./max. ratio): 12.4 – 68.1 kilos/minute (*) - Isocyanate flow rate (min./max.): 110 to 605 g/s (*) - Polyol flow rate (min./max.): 97 to 530 g/s (*) - Heat exchanger: 0.7 m² - Total power input: 11.5 kW - Air consumption: 130 nl/pour Storage unit: - Two insulated single-jacket steel tanks, 90 liters capacity - Sight glass - Two low-pressure switches - Manual drain valve - Polyol tank agitator - Automatic tank filling (pumps not included) Component temperature control: - Heating element - PT 100 probe detecting the temperature of the Materials - Connections to the cooling water system (not supplied) Csb Eev S Hntongtyjgt Mixing head: - Mechanical mixer powered by a three-phase asynchronous motor. - Pneumatic opening and closing cylinder - Conical injectors for component pressure adjustment - Component recycling through the mixing head - Push-button box with emergency stop button, program selector, and pouring control button - Standard cleaning system - Manual safety rinse - Final blast Machine completely overhauled in 2022 by Cannon: invoices available

Condition: good (used), Year of construction: 1996, operating hours: 40,794 h, Functionality: fully functional, Complete Battenfeld Cincinnati line, supplemented by a Sica A10-63 bundling unit. Ceb Engovbik Ajtyogt

Condition: new, Year of construction: 2025, Functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: Cob Esq Nfuzjngtyjgt - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: used, Functionality: fully functional, The hot runner device CW 662 is a 6-way device from YUDO and is for sale, of course with a BA for the device. Ceb Engev Smmcjtyegt

Condition: used, Two Günther hot runner units are for sale, one with 15 channels. L: 470 mm W: 370 mm Cob Esv Sml Ssngtysgt H: 150 mm Weighs approximately 4 kg Connector: 16 V/400 A