Year of construction: 1996, Condition: good (used), Shredding system, twin-shaft shredder, 2-shaft shredder, shredder, chipper, cutting mill, twin-shaft crusher, rotor mill -Shredder system: equipped with 24 cutting blades -Engine power: 7.5 kW -Speed: 28 rpm -Dimensions cutting blade: 250 x 19 mm -Filling nozzle 500 x 470 mm -Dimensions 650/1760/H470 mm Cgslipevbylwef I Hst -Weight 864 kg

Condition: used, Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 28460, clamping force: 3,500 kN, screw diameter: 55 mm, clearance between the columns: 950 mm, overall weight: 5,000 kg, pump power: 45,000 W, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, ENGEL ES1350/350 HL Injection Molding Machine with Robot – Year 1995 Specifications: - Manufacturer: ENGEL - Model: ES1350/350 HL - Year: 1995 - Clamping force: 3500 kN (350 t) - Control unit: Core pull on moving platen - Robot included: ENGEL ERC 53/2-CL (1995) Condition: Machine is fully operational and currently running in a continuous production cycle. Included: - Take-out robot Celiowglwbepf I Hegt - Full documentation - Electrical and hydraulic diagrams Location: Poland

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 050, I am offering a single-screw extruder from Herbert Stork. Screw diameter 30mm, process length 700mm. Max. screw speed 120rpm; Cslsvx Ul Toipf I Hogt Daynisco pressure sensor newly installed with test report; System has recently been serviced with gear oil change and maintenance report; Documentation is partially available; There are 5 different screws with different compression ratios, 2x with mixing part; A round nozzle with 3mm is installed. I work in extrusion technology myself.

Year of construction: 1997, Condition: used, power: 21 kW (28.55 HP), cutting length (max.): 4,230 mm, cutting height (max.): 100 mm, cutting width (max.): 6,100 mm, main saw diameter: 450 mm, Machine type: FLM 430-630 / MCS-Evolution / plastics Cutting length: 4,230 mm Cutting width: 6,100 mm Year of construction: 1997 (unrefurbished) Saw blade projection max .: 130 mm Saw blade diameter max .: 450 mm Main saw motor: 21 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 100 mm Package height min .: 10 mm Saw aggregate forward: 0,2 up to 50 m / min Saw aggregate backward: up to 50 m / min Feeder: up to 32 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 11 pcs grip push clamp Clamp opening: 130 mm Frequency converter for main saw motor 21 kW Saw blade evasion protection Cgjlipfjtrxnqs I Hst Minimum lubrication system for saw blade Strip aligner before and after the pressure beam Turn table: 1 pc. (4200 x 2200 mm) 90° turnable, motor driven turning device Roller table: infeed depth 6100 mm roller rails with polyamide free-running rollers, idle rollers Cross aligning device in the roller table Cross alignment stop at the roller table Automatic cutting length adjustment Machine table hard chrome plated: heavy-duty steel construction machine table surface is precision machined Machine table designed as air flotation table Brass table lips This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted

Condition: used, Year of construction: 2007, Engel VICTORY 330/60 Tech (2007) Closure system: Hydraulic Closure force: 600 kN Cslsv E I Twsipf I Hogt Tiebarless Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 kN Injection system Screw diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2,400 bar

Condition: reconditioned (used), operating hours: 40,662 h, Functionality: fully functional, clamping force: 306 kN, screw diameter: 28 mm, injection pressure: 1,340 bar, ejector stroke: 80 mm, total length: 2,520 mm, total width: 860 mm, total height: 1,900 mm, overall weight: 1,150 kg, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 30M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Cgslipf Iev S D Svj Hot Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: good (used), Year of construction: 2008, Functionality: fully functional, temperature controllers Wittmann TEMpro plus C 140 warehouse no.: 503575 type / device: temperature controllers manufacturer: Wittmann type: TEMpro plus C 140 year of construction: 2008 - connection power: 32A - Heating capacity: 20 kW - voltage: 415 V 50 Hz - Temperatur max.: 140° - Circulating fluid: Wasser/Water - gadgetry: 2 x HF 3415 Cgoliev U U E Ejpf I Hot

Condition: used, saw blade diameter 400 mm cutting diameter 130 mm stroke 135 mm mitter cutting - all-position 0-45 ° Cgjled Scrroipf I Het turning speed range 1420 / 2840 U/min capacity 45 degrees: square 110 mm capacity 45 degrees: flat 50 x 240 mm capacity 90 degrees: flat 95 x 240 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 120 mm voltage 400 V total power requirement 3,7 / 4,5 kW weight of the machine ca. 600 kg dimensions of the machine ca. 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping

Year of construction: 2002, Condition: ready for operation (used), General Data Measurements width 4,15 m Measurements depth 14,19 m Measurements height 4,15 m Cgjljwgf Dueipf I Hot Machine weight 143000 kg Control Unit Model 1.6 Injection Unit Screw diameter 105 mm Shot weight 4727 g/PS Stroke volume 4727 g/PS Injection pressure 2296 bar Clamping Unit Clamping force 2300 kN Opening stroke 2600 mm Max open daylight 2600 mm Size of mold platens 2830 x 2400 mm Additional Equipment Robot system Core pulls Hot runner controller This Krauss Maffei 2300-12000 MC plastic processing machine was manufactured in 2002. Featuring a robust 105 mm screw diameter and an impressive injection shot weight of 4727 g/PS, it ensures high-quality production. The machine offers a closing pressure of 2300 kN and a mold opening stroke of up to 2600 mm, suitable for large-scale manufacturing. A great opportunity to buy this Krauss Maffei 2300-12000 MC plastic processing machine. Contact us for further details regarding this plastic processing machine. Application Types Injection Moulding

Condition: used, Year of construction: 1990, cutting diameter 500 mm Cjlipfsv U Dluj I Hjgt cutting length 5000 mm saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm weight ca. 1600 kg feed stufenlos Motorized length adjustment with digital display manual and spare part list included

Condition: excellent (used), Year of construction: 2000, Demag Ergotech 350-115 viva Closing 35 tons Scrow 25mm Cgolipf Ijwgdhlj Hjt Pls sprue picker

Year of construction: 1995, Condition: ready for operation (used), Cutting angle (fixed): 45°, max. cutting height: 50mm, max. cutting width: 100mm, max. saw blade diameter: 250mm, machine dimensions X/Y: approx. 500mm/1100mm. On-site inspection is possible. Cgolipfswfg E Re I Hjt

Condition: excellent (used), Year of construction: 2008, operating hours: 58,000 h, Functionality: fully functional, clamping force: 100 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Hello dear customers, We have great cleanroom machines in our program again. Here we offer this Engel e Max cleanroom machine from 2008. This machine is equipped with a GEKU SR 500 ST linear robot. The machine has run almost 58,000 pump hours in automatic mode. The machine comes from a well-known manufacturer in the pharmaceutical industry, so the machine, including handling, was subject to very strict maintenance management and is in the very best condition for its age. There is hardly any damage to the paintwork. I would be happy to send you further information and make you an offer. I look forward to your inquiry. Cjlipjt A Ufwef I Hegt With sunny greetings Nick Schönfeld

Condition: used, saw blade diameter 370 mm cutting range round 115 mm cutting range square 105 mm cutting range flat 70 x 240 mm cutting length min. 730 mm cutting lenght max. 4000 mm Cgolijd Il A Iopf I Hst saw blade turning speeds 1250 / 2500 U/min table rotating 180 ° stroke 120 mm feed stepless 0 - 500 mm/min coolant capacity 45 degrees: square 95 mm capacity 45 degrees: flat 50 x 200 mm cutting speed 1250 / 2500 m/min weight of the machine ca. 1,1 t dimensions of the machine ca. 5,00 x 1,30 x 2,00 m Double Mitre Saw for aluminium consits of two SKL 370 Circular Saws on common rails, one saw fixed one saw movable. - Serial No.: 28232 / 28233 - pneunatic clamping of workpiece - coolant equipment

Condition: excellent (used), Year of construction: 1993, Demag Ergotech 200-50 Compact Closing 50 tons Scrow 30mm Hole spacing 35.5x35.5 Cgjlipfswgdd Ts I Hot

Condition: excellent (used), Functionality: fully functional, Equipment: documentation/manual, Dear customers, We are offering an automation system with very high-quality built-in components and robots. We are sure that some of you may need these parts and we will find a fair price for everyone. Cjlou Rqm Ueipf I Hjgt With best regards Nick Schönfeld

Condition: good (used), Year of construction: 1998, Tempering unit Cgolipefcy Drsf I Hot Mrke: Single Type:STW 1-6-25- ZN FY CA 1998

Condition: new, Year of construction: 2024, Functionality: fully functional, clamping force: 500 kN, screw diameter: 32 mm, injection weight: 69 g, overall weight: 2,430 kg, Dear Customers, For sale is a brand new BOY 50 E injection molding machine from 2024 – an absolute highlight for your production and available immediately!!! Due to a project pause, we are offering this machine with a silicone unit for sale. BOY will commission the entire system this week, week 14, and a video of the commissioning will be posted online afterwards. Cgsljv T Uuwoipf I Hst All further technical data can be found on my machine trading website. Best regards, Nick Schönfeld

Condition: excellent (used), Year of construction: 1991, Arburg 270M-500-210 Cgjlipfowgc Epj I Hst Closing 50 tons Scrow 40 mm Injection softened 188 cm3

Condition: good (used), Year of construction: 2007, operating hours: 71,303 h, Functionality: fully functional, machine/vehicle number: 1634.., clamping force: 7,500 kN, screw diameter: 90 mm, injection weight: 2,850 g, plate length: 1,250 mm, plate width: 925 mm, Equipment: documentation/manual, This angel is in very good condition. Cgelipf Ijvta Nte Het One bar can be pulled out to better fit the shape.

Condition: excellent (used), Year of construction: 2002, Arburg 221K-350-100 Closing 35 tons Year of manufacture 2002 Scrow 25mm Injection soaked 49 cm3 Cslipfjwgc Drj I Hjgt

Condition: excellent (used), Year of construction: 2011, operating hours: 74,000 h, Functionality: fully functional, clamping force: 1,100 kN, screw diameter: 20 mm, Equipment: documentation/manual, Top Offer: Arburg 470S 170/70 2-Component Injection Molding Machine (2011) This reliable machine offers outstanding performance and versatility—perfect for demanding production requirements. Main Features: Condition: Well maintained and ready for use Mileage: 9.3 million cycles Operating hours: Manual operation: 74,500 hours Automatic operation: 70,000 hours Injection units: Horizontal: Ø 170 mm, max. 36.2 cm³ Vertical: Ø 70 mm, max. 21.4 cm³ Technical Highlights: Opening stroke: 850 mm Electric indexing Integrated 15-zone hot runner 3 core pulls & 2 blow-out stations (including needle valve control) Additional functions: Multilift H (6 kg capacity) with: 2 vacuum connections 5 double-acting grippers Servo Z-axis (800 mm) Pneumatic control for C-, G-, X-, and B-axis Interfaces for ALS and temperature control units Included additional equipment: 2 Farrag Tech dryers (20S & 10S), compatible with dryer interfaces. This machine meets the highest requirements and is perfect for precise and efficient injection molding processes. Don't hesitate – For more information or to schedule a tour, contact us today. Cjliev Rf S Uopf I Hsgt

Condition: good (used), Year of construction: 2006, Functionality: fully functional, clamping force: 2,600 kN, Equipment: documentation/manual, Dear Sir or Madam, Celijvxkpnspf I Hegt This Engel is just arriving and is being sold on behalf of the customer from direct production. The machine is of course thoroughly tested and cleaned before being switched off. The machine can be inspected on site under load. With sunny greetings Nick Schönfeld

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, overall weight: 10,600 kg, Hello dear customers, We have great cleanroom machines in our program again. Cgelet A Ui Asipf I Hjt Here we offer this Engel 2-component cleanroom machine from 2006. This machine can be purchased as a package with a GEKU SR 500 ST. A conveyor belt, protective cage and turntable are available as accessories. The machine has run just under 33107 hours in automatic mode. The machine comes from a well-known manufacturer in the pharmaceutical industry, so the machine including handling was subject to very strict maintenance management and is in the very best condition for its age. There is hardly any damage to the paintwork. I would be happy to send you further details and an offer. With best regards Nick Schönfeld

Condition: good (used), Year of construction: 2008, Functionality: fully functional, clamping force: 5,500 kN, screw diameter: 90 mm, clearance between the columns: 914 mm, column diameter: 155 mm, displacement volume: 2,480 cm³, Equipment: documentation/manual, Here we are offering a freshly arrived Engel CL 4550/550 built in 2008 Cgelipsvw Ad Uef I Hjt Please ask for more information. Regards, Nick Schönfeld