English
German English Dutch Dutch
BOHRFIX A kompakt BOHRFIX A kompakt BOHRFIX A kompakt BOHRFIX A kompakt
more images
4
Call
Korschenbroich, Germany Germany
(dealership location)
7648 km
1999
used
BOHRFIX A kompakt 4 ja Bhk7yjgfqs air pressure ja weight 20 kg
MONNIER & ZAHNER 256 MONNIER & ZAHNER 256 MONNIER & ZAHNER 256
more images
3
Call
Metzingen, Germany Germany
(dealership location)
7971 km
1985
used
workpiece diameter 50 mm threading length 100 mm thread pitch mm total power requirement 1 kW weight of the machine ca. 1500 kg dimensions of the machine ca. m Lkouj
REMS TORNADO REMS TORNADO REMS TORNADO REMS TORNADO REMS TORNADO
more images
5
Call
Barsbüttel/Hamburg, Germany Germany
(dealership location)
7700 km
used
thread dia.:16-63 mm P3j3z threading length:60 mm speeds::52-26 rpm total power requirement:1,4 kW weight of the machine ca.:250 kg dimensions of the machine ca.:750 x 435 x 300 mm
Narex 1/2 bis 1 Zoll Narex 1/2 bis 1 Zoll Narex 1/2 bis 1 Zoll Narex 1/2 bis 1 Zoll Narex 1/2 bis 1 Zoll Narex 1/2 bis 1 Zoll Narex 1/2 bis 1 Zoll Narex 1/2 bis 1 Zoll Narex 1/2 bis 1 Zoll Narex 1/2 bis 1 Zoll Narex 1/2 bis 1 Zoll Narex 1/2 bis 1 Zoll
more images
12
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Cutting adapter set, hand pipe thread cutter, tapping machine, pipe thread cutter, pipe thread cutter, cutting head, tap wrench, hand thread cutter set, thread cutter, taps -Manufacturer: Narex, hand thread cutter set inch 27 pieces -Sizes: 1/2 ", 9/16", 5/8 ", 3/4", 7/8 ", 1" -Type designation: see photos Bwkcjuhnub -Square holder: can be included -Dimensions: 610/325 / H60 mm -Weight: 8.5 kg
Volumec JT 3150 Volumec JT 3150 Volumec JT 3150 Volumec JT 3150 Volumec JT 3150 Volumec JT 3150 Volumec JT 3150
more images
7
Call
Küssaberg Germany
7971 km
2021
as good as new (ex-display)
JT3150 Electronic Threading Machine easy operation via display directly on the motor, Blind hole depth programmable, Technical details: -Brushless motor 750 watts 220V B37l23d73d -Multifunctional head -3-fold articulated arm system -Tapping capacity in steel M3-M16 -Outreach up to 1900mm -Spindle GR2 Accessories: -Positioning magnet size 2 -quick change adapter size 2 -M3-M4-M5-M6-M8-M10-M12-M14-M16 -control on motor -drill chuck (1-13mm)
EIBER&SAUTER NV/103 EIBER&SAUTER NV/103
more images
2
Call
Eislingen, Germany Germany
(dealership location)
7987 km
used
thread dia.:12 mm threading length:40 mm throat:160 mm :200 mm Y7j2uttsk turning speeds:450 - 2200 U/min total power requirement:0,37/ 0,3 kW weight of the machine ca.:76 kg dimensions of the machine ca.:0,60 x 0,28 x 0,70 m
INFRATIREA MFIV-16 INFRATIREA MFIV-16 INFRATIREA MFIV-16 INFRATIREA MFIV-16
more images
4
Call
Deutschland Germany
7870 km
1972
used
Thread cutting length: 48-68mm, main spindle stroke: 20-80mm, spindle column guide distance: 280mm, max. spindle table distance: 500mm, clamping surface dimensions: 355x450mm, number/ width of T-grooves: 3/ 12, length: 855mm, width: 685mm, height: 2350mm, weigth: 600kg, machine is not functional. Bcrc9e9s0o
Bilz GSA 12 Bilz GSA 12 Bilz GSA 12
more images
3
Call
Tönisvorst Germany
7631 km
excellent (used)
Thread cutting apparatus Make Bilz Type GSA 12 Bnf9rp0xrr MK 3 Weight 12 kg
HÜLLER Ultromat UG 8 HÜLLER Ultromat UG 8 HÜLLER Ultromat UG 8 HÜLLER Ultromat UG 8 HÜLLER Ultromat UG 8
more images
5
Call
Staufenberg Germany
7810 km
1970
good (used)
Tapping machine make HÜLLER type Ultromat UG 8 make # 626.0231 year of construction 1970 Technical data: tapping capacity up to M 8 / M 10 x 1 mm small thread to be drilled M 2 B3msgmsu small achievable pitch 0,2 mm large spindle stroke 50 mm gr. stroke rate 60 H/min 3 spindle speeds 1400 / 2000 / 2800 rpm. Spindle mounting B 12 chuck clamping range 0 - 8 mm throat 200 mm table area 270 x 270 mm gr. distance spindle to table 500 mm drive power 0,3 kW power supply 380 V, 50 Hz dimensions L x W x ...
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Tapping machine, stand drilling machine, column drilling machine, tapping machine -Manufacturer: Infratirea Oradea, thread cutting machine type MFIV 8 -Clamping table: 450 x 355 mm -Spindle mount: B16 -Projection: 200 mm -Speed: from 180 to 1400 rpm -Travel: 220 mm -Spindle stroke: 50 mm -Electric motor: 0.6 kW -Number: 2x machine available -Price: per piece -Dimensions: 870/680/H1835 mm -Weight: 446 kg/piece Gpac9hymy
ALIA TOOL  Multitap 1300 ALIA TOOL  Multitap 1300 ALIA TOOL  Multitap 1300 ALIA TOOL  Multitap 1300 ALIA TOOL  Multitap 1300 ALIA TOOL  Multitap 1300 ALIA TOOL  Multitap 1300 ALIA TOOL  Multitap 1300
more images
8
Call
Rödermark Germany
7854 km
2000
good (used)
OFFER 21434 Technical data: - Tapping capacity approx. M 3 - M 16 - Working range ( swivel radius ) approx. 1300 mm - speeds infinitely variable up to 500 rpm - quick-change tool holder size 2 diam.31 - Various inserts for quick-change tool holder - pneumatic connection with pressure reducer 6 - 8 bar - mobile base frame with material supports - working height 1000 mm - space requirement approx. W 1600 x H 2000 x D 1000 mm - weight approx. 150 kg Pvbel
CMA LCN12; RE16; RH24, RH30; RH45; RH60 CMA LCN12; RE16; RH24, RH30; RH45; RH60 CMA LCN12; RE16; RH24, RH30; RH45; RH60
more images
3
Call
Bocholt, Germany Germany
(dealership location)
7600 km
2020
new
please only inquiries from Germany Postcode area: 2,3,4,5! Bnp3rtrarh CMA pneumatic electric or hydraulic thread cutting machines Wear-free parallel arm with ball bearings pneumatic drive or electric drive or Danfos hydraulic motor hydraulic drive standard digital adjustable working and return speed except pneumatic models Quick-change adapter according to DIN standard Cutting at any angle (M models) Stationary or mobile
Profiroll 3-PWD Spezial Profiroll 3-PWD Spezial Profiroll 3-PWD Spezial Profiroll 3-PWD Spezial
more images
4
Call
Deutschland Germany
7870 km
used
Rolling force: 5kN, workpiece root diameter: 12-20mm, tool diameter: 50-160mm, slide stroke: 3x60mm, thread length: 60mm, spindle speed: 10-150/min, mounting diameter: 28mm, spindle turning moment: 3x300Nm. Vc0hwgy
Vigel Torino MT 65 Vigel Torino MT 65 Vigel Torino MT 65 Vigel Torino MT 65 Vigel Torino MT 65 Vigel Torino MT 65 Vigel Torino MT 65 Vigel Torino MT 65 Vigel Torino MT 65
more images
9
Thread cutting machine Vigel M65 / T Bef8fglh7e Up to M10x1, 5 in ST37 and M14x2 in softer materials Throuth 170mm 700-1000 and 1400 RPM
FAHRION GA 30-3
more images
1
Call
Staufenberg, Germany Germany
(dealership location)
7810 km
used
Tapping attachment make FAHRION type GA 30-3 Technical data: Cutting edge range 6 - 18 mm Clamping range / drill shank Drm. 7 - 22 mm gr. diameter 82 mm projection from spindle max. 166 mm Weight approx. 4,0 kg with M7bwqxc9i - 6 collets used, in very good condition
FEIN ASge 636
more images
1
Call
Kassel, Germany Germany
(dealership location)
7806 km
used
gebr. tapping machine make FEIN Model ASge 636 Bhwz3nmy Voltage 220 Volt Thread in steel up to M 8 Speed: when cutting 0 - 450 rpm during return 0 - 580 rpm Power input 280 Watt Cone at the drilling shaft B 12 Weight approx. 1.6 kg approx. 20 pcs. in stock
IXION BT 15 GL IXION BT 15 GL IXION BT 15 GL IXION BT 15 GL IXION BT 15 GL IXION BT 15 GL
more images
6
Call
Rödermark Germany
7854 km
1991
good (used)
OFFER 21112 Technical data: - Tapping capacity M 2 to M 10 - Thread per hour up to 2400 Bt7yi8r0j9 - Drilling capacity in steel ST 40 18 mm - Drilling spindle holder MK 2 - Drilling depth 100 mm - Thread depth 60 mm - throat spindle / column 215 mm - 4 drilling spindle speeds 320 - 1600 rpm - table 350 x 290 mm - distance drilling spindle / table approx. 150 - 520 mm - distance drilling spindle foot plate 880 mm - E. foot switch - drive 400 V / 0,55 kW - Space requirement approx. W ...
MAXION BT 18 GL
more images
1
Call
Weil der Stadt Germany
7935 km
2020
new
High performance threading machine with lead screw device. Safety device against tool breakage. Programs for single and continuous cycle, programmable thread depth, piece counter, LED light and electronically controlled motor brake for the single cycle. Easy change of lead screw by quick coupling. Normal drilling capacity 15 mm Thread cutting capacity M 3 - M 10 Threads per hour 1.000 Spindle MK 2 Bknaditwhd Thread depth 60 mm Drilling depth 100 mm Throat 250 mm distance spindle/table 185 to 541...
HAGEN + GOEBEL HG 42 E HAGEN + GOEBEL HG 42 E
more images
2
Call
Bretzfeld Germany
7939 km
1977
good (used)
Size of thread to be drilled in steel M 24 / M 80 x 3 Size of thread to be drilled in light metal M 60 Clamping range of the chuck M 30 spindle stroke 120 mm gr. installation height 600 mm Throat 500 mm Table size 450 x 600 mm Spindle speeds approx. 56 - 355 rpm height of the machine 2400 mm Weight approx. 850 kg Bnd9op8zsp Accessories: extractable chuck Edelmatic type EDM - R520, gr. number of guide cartridges, external thread clamping sleeves, various pulleys.
VEB KARL MARX STADT DZ 500 H IV 500
more images
1
Call
Berlin, Germany Germany
(dealership location)
7943 km
1962
ready for operation (used)
Workpiece diameter: 15-95mm, rotational speed: 5-800/min, connected load: 17.6kW. Bwlbs9we7b
WIEDMANN Quick Boy Gr. 1  M2 - M8
more images
1
Call
Staufenberg, Germany Germany
(dealership location)
7810 km
1994
used
Articulated arm tapping machine make WIEDMANN type Quick Boy size 1 Year of manufacture 1994 Technical data: Thread cutting range M 2 - M 8 Working radius 600 - 1250 mm Machine load 2,5 kg max. torque 35 N/m Speed of the tapping machine 665 rpm. with - Quick change insert M 5 Nu29xhjfc used, in good condition
FEIN ASg 636
more images
1
Call
Kassel Germany
7807 km
good (used)
gebr. hand tapping machine Make FEIN model ASg 636 Voltage 220 Volt Thread in steel up to M 8 Speed: 450 rpm when cutting during return 580 rpm Power input 280 Watt Bwswqgp Cone at the drilling shaft B 12 Weight approx. 1.6 kg
DESOUTTER Unbekannt DESOUTTER Unbekannt DESOUTTER Unbekannt DESOUTTER Unbekannt DESOUTTER Unbekannt
more images
5
Call
Rödermark Germany
7854 km
1995
good (used)
OFFER 20138 Technical data: - Tapping capacity approx. M 3 - M 12 - throat up to approx. 500 mm - stroke up to approx. 600 mm - Speeds approx. 80 - 1000 rpm - 2 spring balancers - pneumatic connection 6 - 8 bar - mobile underframe - space requirement approx. W 1000 x H 2000 x D 800 mm - weight approx. 80 kg Bvp79etq7z
more images
4
Call
Mala Rakovica Croatia
8545 km
good condition (used)
-good condition Bqfommz7x3 WEB-3209
Monnier + Zahner M 605 Monnier + Zahner M 605 Monnier + Zahner M 605 Monnier + Zahner M 605 Monnier + Zahner M 605 Monnier + Zahner M 605 Monnier + Zahner M 605 Monnier + Zahner M 605 Monnier + Zahner M 605 Monnier + Zahner M 605 Monnier + Zahner M 605 Monnier + Zahner M 605 Monnier + Zahner M 605 Monnier + Zahner M 605
more images
14
Call
Akçaburgaz, 1575. Sk. No:2, 34522 Esenyurt/İstanbul, Türkei Turkey
9655 km
1995
good (used)
Thread whirling machine Monnier + Zahner M605 Year of manufacture 1995 Control: Fanuc 18-M Technical data M 605 CNC workpiece-∅ 2.5 - 13 mm max. workpiece length: 300 mm max. whirling length: 110 mm module in steel: max. 1.25 Adjustment angle + 12 Clamping system: W25 / Tasseau whirling head drive: P= 1.1kW (2.2kW) Speed: 4000 - 6000 rpm Hydraulic power unit: 0.37 kW Ebk7kn Coolant supply: 35.l/min (60 l/min.) Control Powermate H Fanuc: X - axis = longitudinal axis, path max. =200 mm Y - axis ...
INFRATIREA MFIV 8 INFRATIREA MFIV 8
more images
2
Call
Berlin, Germany Germany
(dealership location)
7943 km
1980
ready for operation (used)
Table dimensions: 450x355mm, weight: 450kg. Bv7uukzobw
DESOUTTER RO 300 DESOUTTER RO 300 DESOUTTER RO 300 DESOUTTER RO 300 DESOUTTER RO 300 DESOUTTER RO 300
more images
6
Call
Rödermark Germany
7854 km
1996
good (used)
High performance - bench tapping machines on T-slot plate Technical data: Xjsm7iax - Tapping capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm . table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chucks 250 mm - pneumatic connection with pressure reducer - mobile underframe - space requireme...
 

Used Other

Search Werktuigen now with more than 200,000 used machines:
FEEDBACK
Successful: Task carried out
Error: Task could not be carried out