Used internal threading machines | nominal diameter size M9 - M12 for sale (23)

Condition: good (used), Threaded snowing machine Hahn and Goebel HG 12E Ksdpfx Aed Rkbrod Ejdk Spindle rotation 180-900 rpm 380v MaschNr.1917/16 M4-M65

Condition: good (used), Cutting range, internal thread: M 2 - M 12 Kdjdpfod D U T Hsx Ad Eek Working radius approx.: 1650 mm

Condition: used, throat 215 mm thread M2 - M10 thread depth max. 60 mm spindle MK 2 bore depth 90 mm 150 bis 450 mm 220 x 285 mm column diameter 75 mm mm Kdsdoyv N Ddopfx Ad Esk Total height 950 mm motor speeds: 700 / 1400 1/min weight of the machine ca. 95 kg

Condition: used, Drilling and Tapping Machine FLOTT Model TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Kdodpfsdzp S Nox Ad Eok Table size: 275 x 200 mm Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power connection: 380 Volt, 50 Hz - Spindle speed selection via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the spindle - Drilling head height adjustment via crank and rack on the column - Tapping device with guide bush and selector for right- and left-hand threads - 3 guide bushes for right-hand threads: 0.7 mm, 0.8 mm, and 28G included - Tapping possible with or without guide bush - 1 geared drill chuck Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base included Space requirements (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg Good condition

Condition: new, thread dia. 12 M max. turning speeds 400 U/min thread M 3 - M 12 M working area 1600 R max. working range 500 Rmin. weight 16.0 kg Kdsdpfxexabbmj Ad Esk Description: The AT II models have a radius of up to 1600 mm and thanks to their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - Tool holder with 6 cutter holders • M3 20111812 DIN 371 19 • M4 20111814 DIN 371 19 • M6 20111816 DIN 371 19 • M8 20111817 DIN 371 19 • M10 20111818 DIN 376 19 • M12 20111820 DIN 376 19 - with slip clutch - Control valve with lubrication - Including compressed air motor / maintenance unit - Adapter connection size 1

Condition: new, thread dia. M3 - M16 metrisch 250 U/min. 0 6 - 8 bar working area max. 1100 mm weight 15 kg dimensions 700 x 280 x 250 mm Pneumatic tapping machine Type with an adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M16 threads, angle adjustable. 8 pcs. quick-change chuck with slipping clutch. Documentation in English! Optional: clamping table with grooves type: FL-WB Kdodpfx Adehiptge Ejk

Condition: ready for operation (used), Year of construction: 2012, Wiemers AT 12 II Air Tapping Pneumatic Tapping Arm Thread Cutter Year of manufacture: 2012 Operating pressure: 6 – 7 bar Air consumption: approx. 750 l/min Thread size: M3 – M12 Description has been adopted as provided. You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID is supplied. Kedpfx Adoymkrve Eodk Subject to prior sale. Visit our shop to see our full range of offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and product description purposes. Please note that deviations from technical data as well as errors in the item description may occur and are subject to change.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Ksdpfx Asylpzmed Ejdk

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1024JT05VL, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, working range: 2,000 mm, overall weight: 19 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 500 rpm, throat depth: 2,000 mm, table height: 870 mm, table width: 800 mm, table length: 600 mm, Equipment: documentation/manual, VOLUMEC JoyTap 3150 - Thread cutting unit M3 - M16 / 50-500 RPM incl. automatic tool lubrication incl. VASTC control for Joytap - Supportive control for thread cutting 1. NEW ALUMINUM STRUCTURE developed with EXCLUSIVE Volumec profile, which provides greater rigidity and precision compared to other models 2. Improved articulated arm mechanics for more smoothness and power 3. NEW GENERATION BRUSHLESS MOTOR (G2) with unmatched performance and reliability Ksdpfx Asvr U Unsd Eodk 4. INTEGRATED WIRING that does not limit mobility 5. VASTC TOUCH PANEL, the most advanced device on the market for screwing and thread cutting, updated with new functions and programmable torque (Nm) 6. MULTIDIRECTIONAL HEAD with automatic fixation 0-90° workpiece orientation 7. QUICK-CHANGE COUPLING SPINDLE THREAD CUTTING: • AUTOMATIC THREAD CUTTING (setting of pitch - depth - speed - torque Nm to protect the tools) • THREAD CUTTING with PROGRAMMABLE chip breakage • MANUAL THREAD CUTTING (set speed - torque (Nm) to protect the tools) • THREAD COUNTING is carried out • PROGRAM MEMORY, password protected • Simple PROGRAMMING via INTEGRATED INTERFACE • PROGRAM MEMORY for recurring applications • CONSTANT SPEED AND TORQUE when thread cutting thanks to rotary encoder WORK TABLE: Size: 800x600 Height: 870 30 mm base made of milled steel and T-slots in the inner compartment

Condition: excellent (used), Cutting range: M3-M10 in steel M3-M16 in cast iron M3-M18 in light metal and brass Spindle speeds: 120-240-180-360-300-600 rpm Kdedpfoyg Dhwsx Ad Ejk Includes 1 new tap chuck Everything works smoothly and well.

Condition: good (used), Year of construction: 2003, Offer 25508 High-table tapping and drilling machine with leadscrew Technical data: - Thread tapping capacity: M2 up to M10 - Threads per hour: up to 2400 - Drilling capacity in steel: 18 mm Kjdpfx Aoygk Idsd Ejdk - Drill spindle mount: Morse taper 2 (MK2) - Drilling depth: 100 mm - Threading depth: 60 mm - Spindle to column distance: 215 mm - 4 drill spindle speeds: 320 – 1600 rpm - Table size: 350 x 290 mm - Spindle to table distance: approx. 150 – 520 mm - Cycle-controlled coolant spray system with pneumatic connection - Drive: 400 V / 0.55 kW - Space requirement: approx. W 580 x H 1430 x D 750 mm - Weight: approx. 150 kg

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge Ksdpsupbf Defx Ad Eodk - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz Kdjdshgnd Aspfx Ad Ejk - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: used, thread dia. 3 - 10 mm Kdodpfx Aelwlk Aed Eok Tools speed 120 - 600 U/min table-size 250 x 350 mm throat 250 mm voltage 380 V threading length 80 mm total power requirement 0,55 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,7 x 0,7 x 1,9 m

Condition: new, thread dia. 12 mm Ksdpfx Adefg U Spj Ejdk 375 U/min. working area 180 - 1000 mm engine output 0,7 kW

Condition: new, thread dia. M3 - M12 metrisch 400 U/min. 0 6 - 8 bar working area max. 1100 mm weight 15 kg dimensions 700 x 280 x 200 mm Pneumatic tapping machine Type with an adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M12 threads, angle adjustable. 8 pcs. quick-change chuck with slipping clutch. Documentation in English! Optional: clamping table with grooves type: FL-WB Kedehiptcepfx Ad Eodk

Condition: new, thread dia. M3 - M16 metrisch 312 U/min. working area max. 1100 mm engine output 0,6 kW weight 30 kg dimensions 700 x 600 x 200 mm Electric tapping machines for M3 - M16 threads, Angle adjustable. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Options: Clamping table with grooves Type: FL-WB Kdjdpfx Adst Eabis Ejk

Condition: new, thread dia. M3 - M16 metrisch 312 U/min. working area max. 1100 mm engine output 0,6 kW weight 30 kg dimensions 700 x 600 x 200 mm Electric tapping machines for M3 - M16 threads, Includes connection for cutting oil supply! Kedjt Eahpspfx Ad Esdk Adjustable angle. Quick-change chuck with slip clutch. Display adjustable: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Documentation in English! Optional: Tiller table type: FL-WB

Condition: new, thread dia. M16 - M42 metrisch 50 - 200 U/min. working area max. 1300 mm engine output 1,2 kW weight 105 kg dimensions 0,85 x 0,85 x 0,3 mm Electric tapping machines for M16 - M42 threads, Angle adjustable. 8 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Options: Ksdpfowinywex Ad Eodk Clamping table with grooves Type: FL-WB

Condition: new, thread dia. M5 - M24 metrisch max. 200 U/min. working area max. 1200 mm engine output 1,2 kW weight 25 kg dimensions 740 x 800 x 400 mm Electric tapping machines for M5 - M24 threads, Angle adjustable. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Kdjdpfevblh Rex Ad Eek Options: Clamping table with grooves Type: FL-WB

Condition: used, thread dia. M3 - M12 mm 400 U/min. 25 Nm air pressure 6 - 8 bar working area Radius 1000 mm weight of the machine ca. 12 kg Kdjdpfxofg U Smo Ad Eek Demonstration machine! Pneumatically driven tapping machine for M3 - M12 thread with: - stable and flexible working arm. - 6 pcs. Quick-change chuck with slip clutch. Documentation in English !! optional: - Clamping table with T-slots clamping surface 900 x 600mm

Year of construction: 2022, condition: new, pneumatic tapping arm Kdedpoipmr Ijfx Ad Ejk Model: R1950-08 Power: M2-M8 speed (rpm): 700 Air demand: 750l/min pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Model: R1950-12 Power: M3-M12 Speed (rpm): 400 Air demand: 750l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Model: R1950-16 Power: M3-M16 Speed (rpm): 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 27kg Adapter mounting: TCS 2B Model: R1950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Model: R1950-022 Power: M3-M22 Speed (rpm): 120 / 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Model: R1950-027 Power: M3-M27 Speed (rpm): 70 / 220 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Standard accessories for all models: - Parallel arm - Air motor - 6 safety quick change tapping collet of your choice - Guide column with mounting flange - Radial boom (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Condition: good (used), Hagen & Goebel HC 22 E / Thread Cutting Machine - Speed range: 56 - 355 rpm - Table dimensions: 600x500 mm - Year of manufacture: 1988 Dimensions: Ksdox Edbmjpfx Ad Eedk LxWxH 1.1x0.7x2 meters / Weight 900 kg Subject to errors and input mistakes.