Used other accessories for metalworking machines for sale (277)

Condition: like new (used), amount 1 Set Year unbekannt 0 For sale is a package of Sandvik Coromant cutting inserts. Some are new and some are slightly used. Year of manufacture unknown. SANDVIK Coromant 23 pc. -> 193.1 – 1222 TBT – 122 P2 – S1P – ISO / P10 Njdpfx Aajy H N Abe Eowg 10 pc. -> 193.1 – 1222 TBT – 122 P2 – H13 – ISO / K10 36 pc. -> RCMT 12 04 M0 / GC-A P25 MO 39 pc. -> RCMT 12 04 MO-WL / GC-A P25 17 pc. -> R215.44-15T331M-WL 4040 38 pc. -> WCMX 060308 R-51 135 P5

Condition: like new (used), amount 1 Set Nwjdpfx Aajy H Nzwe Eog For sale is a package of Sandvik Coromant cutting inserts. Some are new and some are slightly used. Year of manufacture unknown. SANDVIK Coromant 65 pc. -> SMA LNCX 18 06 AZ R-11 30 pc. -> WCMX 04 02 08 R-53 48 pc. -> WCMX 03 02 08 R-53 34 pc. -> WCMX 05 03 08 R-51

Condition: like new (used), amount 1 Set For sale is a package of WIDIA cutting inserts. Some are new and some are slightly used. Year of manufacture unknown. 48 pcs. -> F3 3945 000 2033 – TT S / P 20 / P30 Nwodpfx Aaoy H Nzke Esg 59 pcs. -> F3 3943 0103972 – TTM P15-P30 43 pcs. -> G174T-A3-8261/00 FUTURA 20 pcs. -> F3 3946 0031468 – THM GT10 K10-K25 39 pcs. -> CCMT 1 222 46 624 88 10 pcs. -> CCMT 120408 – THM K10.K20 10 pcs. -> F3 3945 002 6920 – TN 35 6 pcs. -> F3 3946 0042894 – TTX MB 7 pcs. -> F3 3946 0030384 – TTM09 27 pcs. -> Diverse

Condition: like new (used), amount 1 Set For sale is a package of KERN cutting inserts. Some are new and some are slightly used. Year of manufacture unknown. Nedpfx Aaoyr Si Te Eowg 50 pcs. -> F3 3947 0029904 HP25A 30 pcs. -> F3 3943 pcs. -> F3 3943 pcs. -> KERN KG – Diverse

Year of construction: 1998, condition: used, grinding length 0 mm grinding width 0 mm Nedpew Uldcofx Aa Ejwg feed 0 kW Change Gears fpr Reishauer UL 1800 , in wooden case !

Condition: like new (used), amount 1 Set Nodpfsun Uh Ajx Aa Eewg

Condition: like new (used), amount 1 Set Nwodpfx Aevx Uzuea Eog Year unbekannt Jahr weight 0 kg

Condition: like new (used), amount 1 Set Year unbekannt Jahr Nwodpfxovx Uzno Aa Eog weight 0 kg

Condition: like new (used), amount 1 Set Year unbekannt Jahr dimensions of the machine ca. 0 m Njdpfx Aaevx Uzhe Eswg

Condition: like new (used), amount 1 Set Year unbekannt 0 Nwsdpfxevx Uzbo Aa Ejg dimensions of the machine ca. 0x0x0 m

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. Nwjdpfefz Apqex Aa Eog With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Nwsdpfx Aaefz Aw He Ejg In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk. Nwodpfx Aasfz A Ilo Ejg

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Nwjdofz Dvvjpfx Aa Eog Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: like new (used), It's in an excellent condition Nwjdpfev Rbxqox Aa Eeg

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Nsdpfox T Ah Dex Aa Eswg Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: new, functionality: fully functional, Spare parts for machines manufactured in Poland. AFM Andrychow, FUM Poreba, FAT Wrocław, AVIA Warszawa, Jafo Jarocin, ZM Tarnow, FAMOT Pleszew. Spare parts for Polish lathes, including: TUM 25, TUM 35, TUJ 50, TUJ 63, TUJ 560, TUJ 630, TUR 50, TUR 63, TUR 560, TUR 630, TPK 90, TRP 93, TRP 110, TR 115, TR 135. Spare parts for Polish milling machines, including: FND 25, FND 32, FND 40, C20, D36, D40, FF series, FR series. Nwsdpfx Asum Ixxea Ejg

Condition: new, We supply spare parts for all machine types manufactured by ZMM SLIVEN in Bulgaria. Nedpfx Aaouladks Ejwg

Condition: new, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for lathes S32. Nedpfxsufgb Ij Aa Eswg

Condition: good (used), Various quick-change tool holders, total of 42 pcs: 7 pcs WDL 4/50 16 pcs WDR 4/40 10 pcs WDL 4/40 Nwodpfx Aajy N S Ifs Eeg 3 pcs WB 4/60⌀ 3 pcs WBW 4/60⌀ 1 pc WBW 23/60⌀ 2 pcs without type Please let us know which items you are interested in so that we can provide you with an offer.

Condition: good (used), Sine vise Type: for milling, cross tiltable Manufacturer: Stanko Model: 370P 22 Number: 3177 Size: 500 x 200 mm Base area: 500 x 200 mm Number of T-slots: 3 T-slot width: 11 / 20 mm T-slot depth: 6 / 16 mm Height: 100 mm Equipment: cross tiltable Dimensions: 500 x 200 x 100 mm Weight: 31 kg Nwodpfxjwv Dfpo Aa Eog

Condition: refurbished (used), functionality: fully functional, -KOM 3180- Offered here is a fully overhauled motor spindle, type HSK-A-100, from Starrag Heckert AG. The spindle underwent comprehensive maintenance and testing in 2013 (test reports can be provided upon request). During inspection, no anomalies outside the tolerance range were identified. Furthermore, components such as seals, operational noise, and air circulation were thoroughly examined. The spindle is packed in a wooden crate and is ready for transport. The original purchase price of this spindle was approximately €80,000. Technical specifications: Manufacturer: Starrag Heckert Type: HSK-A-100 Spindle type: Motor spindle Material: Metal Max. speed: 15,000 rpm Clamping force: 47 kN (target range: 45–55 kN) Njdpjy H Hydjfx Aa Eewg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 728 kg, We are offering this GF WorkPartner 3 pallet changer, year of manufacture 2022, in very good condition. Product: GF WorkPartner 3 (WPC III dec), year 2022 Type: Automatic pallet changer / automation system Weight: 728 kg Application: Unmanned manufacturing (EDM & milling) Compatibility: GF machines (FORM, CUT, Mikron MILL – depending on interface) Condition: Currently still in operation, being replaced by a WorkPartner with more pallet slots Availability: From June 2026 Pallets not included Images: See attachment Nwsdpjy Igytjfx Aa Eog Number of positions: 7 If you have any questions or require more information, please feel free to send us a message or call us.

Condition: used, mobile finest oil filtering technology, new The mobile ultra fine filter system M 130 is the flagship among the mobile filter systems. Equipped with a scalper, a (washable) pre-filter for coarse impurities (up to 5 µm, for example swarf), and two C-1000 housings, this system leaves nothing to be desired in order to process technical oils, water-/ oil- or oil-/water emulsions to excellent purities. The scalper and the pre-filter increase the life service of your systems and the filter elements significantly due to the two-stage pre-filtration. This is followed by the oil processing with the reliable ultra fine filter elements which are also used in space travel. You achieve purity values up to NAS 1 (ISO 4406: 13/10/7) and better technical data M 130 flow oil: bis 1.050, 1.500, o. 2.100 liter/hour Nwodpjgrz Hbjfx Aa Eeg dimensions: height: ca. 1.175 mm, width: 585 mm, depth: 811 mm weight: ca. 93 kg Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 2019, condition: ready for operation (used), A Mepac mold turner for facilitating maintenance and repair work on tool molds is available. Load capacity: 7000kg, rotation angle: 90°, machine dimensions X/Y/Z: approx. 1500mm/1400mm/1000mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Njdpfx Aaey E S Epj Eewg