Used other deburring machines for sale (41)

Year of construction: 2003, condition: used, Technical details: workpiece length: 130 - 2000 mm diameter min.: Ø 10 mm diameter max.: Ø 60 mm control: Fagor 10/102 S dimension machine xH: 3,8 x 3,8 x 1,9 m dimensions electric cabinet LxWxH: 1,2 x 0,6 x 2,2 m machine weight ab.: 4 500 kg Milling and deburring machine CNC of pipe ends or round steel on both sides. - Material feed via conveyor belt, travel distance approx. 3 300 mm. - Brush unit type PGAS 8/100 V-HV both sides/opposite, speed 10 000 rpm. (drive via compressed air) - Cutter holder, both sides/opposite - milling spindle and brush holder arranged one behind the other - Operation via control panel on the switch cabinet Support: Bdedpfju Ngc Nox Ahnec - 2 x, 1x movable and 1x fixed - Lateral displacement of the right support Length 1725 mm by hand - Working paths transverse=5 - 50 mm; longitudinal=5-50 mm - Working spindle = speed max. 320 rpm *

Year of construction: 2016, condition: ready for operation (used), Operator side: left, workpiece thickness: 1-150mm, constant working height: 860mm, feed speed infinitely variable via frequency inverter: 1-4m/min, upper section paint finish: telegrey RAL 7074, lower section paint finish: gentian blue RAL 5010, sanding roller Shore hardness: A20, max. workpiece weight: 300kg, thickness and tolerance compensation: ±1mm, max. workpiece distortion over the entire workpiece length: 6mm, noise level approx.: 85dBA, mains voltage: 3/PEN AC 400V ±10%, alternatively: 3/PEN AC 480V, phase sequence: clockwise rotating L1-L2-L3, protective measure: TN-C system with PEN conductor according to VDE 0100 T310, control voltage: DC 24V, compressed air connection: 6bar ±10%, clean, oil-free, dried air. Equipment: CE marking, electrical operating elements in the control panel, safety flap at the infeed, electromechanical workpiece thickness adjustment, automatic conveyor belt control, air gauge, fault diagnosis system, electrical cabinet, design in accordance with accident prevention regulations, potential-free interface for controlling a dust extraction unit, dust collection container and cleaning brush for the conveyor belt at the outfeed, including documentation. An on-site inspection is possible. Bedpsza E Sdefx Ahnsdc

Year of construction: 2011, condition: excellent (used), Manual chamfering machine for round tubes and bars 4-spindle deburring and chamfering machine For internal and external deburring/chamfering Spindle speeds: 70/140 rpm Materials: steel, stainless steel, aluminium, non-ferrous metals Diameter: Ø 2 – 75 mm Bjdey Hcagepfx Ahnodc Min. workpiece length: from 100 mm Deburring time: 3–4 sec. / end face The machine is equipped with deburring tools from the manufacturer Kopal. Tool holder is MK3 The deburring tools are adjustable so that the same chamfer depth is always achieved. Very good condition

Condition: used, Year of construction: 2008, functionality: unexamined, Equipment: documentation/manual, ECM deburring machine including a double-chamber filter press and separate cooler. Available on short notice without warranty. Collection and transport must be arranged independently. Bdodjy U Dyqopfx Ahnoc

Condition: new, Edge and contour milling machine Make: Assfalg Model: KKE 1 condition: new machine Speed: 8.000 - 24.000 rpm (infinitely variable) max. bevel width: 3 mm serially equipped with: - Guide rail Bsdpfx Ahsbhfzbsnodc - wrenches, open-end wrenches - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating instructions

Condition: new, Deburring machine brand: Aboagye Model: AF 165 Condition: new machine Speed: 2,800 RPM maximum cutting width: 1 mm equipped as standard with: -Special flap disc K80-ST -Suction nozzle Bdjdedurxnopfx Ahnsc -Manual

Condition: new, Trovalisier - and slide grinding machine Make: ABOAGYE Model: TV 95 SL Bdodedwq Hgjpfx Ahnec Condition: new machine Speed: 1,500 3,000 rpm (stepless) Trough inside dimensions: 498 x 384 x 410 mm Filling volume: 70 l equipped as standard with: -Timer -Water tank -Water pump -Manual

Year of construction: 2003, condition: used, contact roller 70 x 50 abrasive belt size 2000 x 12/50 power capacity 2,2 kW Overall size ca. 400 x 1100 x 1250 mm deburring machine / free belt frinding machine abrasive belt with widt from 12-50 mm with vertical working position head inclination up to 45° both ways easy bending of the belt allows to follow the shape cutting speed 24m / sec big tabel surface with ball rolling Bedpfxsy Ihabe Ahnodc with self filtering dust extractor system, filtering bag in retardant polyester material for retaining finest dust. Impeller with open blades to prevent clogging. air consumption 700 m³/h comes with a huge bunch of belts!

Year of construction: 2013, condition: as good as new (ex-display), Specialised vibratory machining machine type R 220 DL. Machine in like new condition. Only 20 hours worked! Bodpfehvy S Dox Ahnjdc You are welcome to buy it.

Year of construction: 2014, condition: good (used), Avatec trough vibrator TV 60, 60 liters nominal capacity with base frame, process time control, manual separating device, circulation cascade 50 liters, made of stainless steel. New price of the machine: €12,000.00. Bjdpjyzak Ejfx Ahnodc

Year of construction: 2017, condition: used, functionality: limited functionality, machine/vehicle number: 2017038, Technical characteristics: Bdjdpfx Ahjxx Nq Tenec ⚙️ Core Specifications Attribute Value Technology: High-pressure water-jet deburring Max Pressure: Up to 1000 bar Materials Processed: Cast iron, aluminum, steel Machine Type: Rotary table or tunnel with step feed Automation: Robotic arm with programmable sequence: Staubli TX60 newly retrofitted!!! Nozzle Material: Long-life alloy Construction: AISI 304 stainless steel Workpiece Handling: Mechanical clamping on custom pallets Water Treatment: Integrated deoiling and filtration system 🧰 Features & Capabilities Deburring & Flushing: Removes loose burrs and embedded swarf, even in intersecting holes. Flexible Programming: Supports various part geometries and production volumes. Robotic Integration: Nozzles mounted on anthropomorphic robots for precision targeting. Modular Design: Configurable for different layouts and productivity goals. Eco-Friendly Operation: Water-based cleaning with extended bath life via filtration. Loading/unloading manual table: with the option of 2 work stations running in parallel, equipped with Poka Yoke devices. Machine status: WORKING – High pressure pump needs to be retrofitted to achieve 1000 Bar (currently 350 bar).

Year of construction: 2025, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Bdedsuia Dqjpfx Ahnjc Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Year of construction: 1993, condition: good (used), For sale from stock location: Albert-Proeller-Straße 9a, 86675 Buchdorf Deburring Drum K20 (Year of manufacture: 1993) • Manufacturer: Bruno Kraft • Model: K20 • Machine Type: Deburring Drum / Vibratory Finishing Drum • Year of Manufacture: 1993 • Application Areas: Deburring, edge rounding, descaling, removal of scale, surface improvement of small workpieces Technical Data Drum • Drum volume: approx. 20 l • Drum diameter: approx. 400–450 mm • Drum width: approx. 250–300 mm • Drum material: steel, internally rubber-lined or PU-coated • Lid: bolted, with gasket Drive • Motor power: 0.25–0.55 kW (typical for K20 series) • Speed: approx. 30–60 rpm Bdodpfx Aoyr I Npehnsc • Type of drive: direct or belt drive (depending on year of manufacture) Processing Parameters • Max. workpiece size: approx. 80–120 mm • Typical fill quantity: 10–15 kg of media plus workpieces • Suitable media: ceramic, plastic, porcelain, steel media • Processing operations: o Deburring o Edge rounding o Descaling o Removal of scale Dimensions and Weight • Length: approx. 700–900 mm • Width: approx. 500–600 mm • Height: approx. 700–900 mm • Weight: approx. 80–120 kg

Year of construction: 1971, condition: excellent (used), Brand: Sun Mountain Type: FTM Year of construction: 1971 Dimensions: approx. B 1,00 X 1,00 x H 1.50 m Weight: approx. 500 kg Bedpfxed Sdg Ss Ahnjdc All information without guarantee. The machine is located in a very good condition. A demonstration of power is possible in our showroom at any time.

Year of construction: 2014, condition: ready for operation (used), A Rausch robot-based deburring machine is available. Support height: 1050mm, spindle speed: 50000rpm, power: 1kW, max. burr thickness: 0.2mm, max. workpiece diameter: 500mm, gear types: straight/helical/angled, max. helix angle: 40°, max. chamfer angle: 45°, max. workpiece length over chuck: 450mm, max. workpiece weight: 50kg. Machine dimensions X/Y/Z: approx. 2050mm/1200mm/2100mm, weight: approx. 1300kg, operating hours: 1271h, utilization time: approx. 8h. Documentation available. An on-site inspection is possible. Bodpfx Aheyxq Uionedc

Condition: excellent (used), functionality: fully functional, Enhanced finishing solution for metal 3D printed components EXTRUDE HONE technology opens the door to a very economical, fast, controllable, flexible, and environmentally friendly process for enhanced surface finishing of metal 3D-printed parts. We have a used machine in stock for immediate delivery. This machine has only been used briefly and is in excellent condition. FEATURES and BENEFITS + Efficiency in enhanced surface finishing. Material removal rate (μm/min) faster than other methods on the market; e. g. up to 3 times faster than electro-polishing. Bedpfov Awrwex Ahnedc + Tooling out of the printer. Tooling and fixtures are built at a reasonable cost since they are 3D-printed. + Highest flexibility. We provide a complete & optimized cathode and fixture design for your components within two working days. + Multiple material master packages Specific parameter files per alloy family. + EXTRUDE HONE Connect From CAD to part, remotely: loading of parameters, upgrading material packages, software, and maintenance. + Make it easy. The all-new and simple operating concept limits the data input to 4 simple parameters – parameters everybody understands.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Control panel base Bjdpfxen Smbrj Ahnsdc - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge. Bedpsn Smclefx Ahnodc

Condition: new, Model Name Bdodpek Au Drjfx Ahnec B3 Entgrat-/Anfasmaschine

Condition: new, Model Name Bjdpfek D Nyiex Ahnsdc Anfassystem UZ12 ULTRALIGHT

Condition: new, working area L-W-H 1000 x 900 x 900 mm Bodexaatzspfx Ahnsdc range L-W-H 1300 x 1750 x 2200 mm weight 350 kg Description: - Compact and elegant design - Easiest operation - low material consumption - optimal use of space - highly effective dedusting - efficient way of working - Environmentally friendly working without dust nuisance - controllable material consumption - Any conventional, dry abrasive is suitable as a blasting material * such as B. corundum, steel sand, glass grain, glass beads, ceramic beads

Condition: new, Model Name Bdodpfxek Au Dvj Ahnec Anfassystem B22 ZERO

Year of construction: 2025, condition: new, working width 950 mm workpiece width - max. 1,0 - 50 mm sandingbelt width 970 mm sandingbelt length 1900 mm weight of the machine ca. 1,8 t The SMD 123 RE is a universal entry-level machine for all-round deburring Uniform edge rounding and surface grinding of sheet metal dry process. * Suitable for processing steel, stainless steel and aluminium. * The non-slip conveyor belt enables safe transport and the Machining even of small workpieces. * The two rotor heads ensure an all-round uniform Edge rounding and a directionless finish. * The intuitive operation via touch panel allows every employee Bedevfhm Depfx Ahnodc get to grips with the machine quickly. * The SMD 1 models are installed and ready for operation in a short time. * The compact design saves valuable production space. * Low acquisition and operating costs lead to short amortization periods and guarantee economical processing of your workpieces. consisting of: - Grinding machine SMD 123 RE (kit): - SMD 123 RE conveyor belt cleaning - SMx xx3 - sanding belt +120 Cubitron II, W=970, L=1900 - SMD 1x3 set grinding flap roller 3-piece. P120 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 20 mm speeds 2850 U/min range of angles 0 - 60 (stufenlos) ° weight of the machine ca. 19,5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for the so-called FACING - removing an unwanted layer of material on the Front side of the workpiece, which is created, for example, by flame cutting a sheet metal. Specially developed for the production of visible chamfers and weld preparations. Powerful electric drive for extreme Charges. * High performance motor * stepless adjustment of the working angle in the range of 0° - 60° * FACING - Edge processing at an angle of 0° to remove unwanted ones Layers of material after flame cutting * The unique mechanical scale to adjust the bevel width for higher precision * A very compact and ergonomic design for high work productivity Bdodpfoppgcvox Ahnec * Circumferential protective frame against damage and versatile grip options * With the appropriate accessories, pipes from D= 150 mm can also be processed * Additional adjustable handle - Chamfer width (hypotenuse): 0 - 20 mm = 400 Mpa / 0 - 16 mm = 400 Mpa - Motor: 1100W

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working Bdsdek Egrtopfx Ahnec * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° - Area of application sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9 m/min - Weight: 110kg - Dimension: 438 x 719 x 644 mm We are happy to offer you an optional 3D manipulator (mobile) for this device on