Used Brandt Edgebander for sale (99)

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Condition: as is/was in production until recently Equipment and technical data: Glue application unit with glue pot and applicator roller Pressing station Cut-off unit with linear guides Flush trimming unit with horizontal and vertical sensing with 200 Hz motors swivelable 0 - 30° with radius scraper with buffing unit Edge thickness 0.4 - 5 mm Coil separation 0.8 x 60 or 3 x 30 mm Workpiece width min. 55 mm Workpiece length min. 160 mm Workpiece thickness 10 - 55 mm Feed rate 11 m/min Pneumatic connection 6 bar Dimensions 3855 x 1000 x 1610 mm Djdpfoy Nuhbsx Apdjkn Extraction connection 100 mm Weight 1000 kg Availability: approx. June 2026 Location: Baden-Württemberg

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Dksdpfx Ajqy Em Topdsn Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: excellent (used), Year of construction: 2017, Brandt KDF 1440 Edition Only 1700 operating hours – in very good condition – can also be supplied with a preheating station. XES 200 autonomous unit (+ €4500) available. SUMMARY OF MACHINE EQUIPMENT: JOINTER HEAD 2 X 2.2 KW 200 HZ GLUING UNIT QA 65 N SAWING UNIT BEVEL/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT FOR SAWING BEVEL/STRAIGHT MULTI-STAGE MILLING HEAD MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT SHAPED MILLING HEAD 1 X 0.35 KW WD 60; also for structural flooring PNEUMATIC 2-POINT ADJUSTMENT RADIUS/BEVEL Dkjdpfxjzb Igge Apdsn MULTI-STAGE SCRAPER HEAD MZ 40 GLUE JOINT SCRAPER EDGE TRIMMING UNIT Overpressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spray unit for workpiece Automatic edge infeed Multi-roller scanning for multi-stage milling head MS 40 + multi-stage scraper MZ 40 Cleaning agent spray unit WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 8-22 mm ¦ 70 mm* – For workpiece thickness 23-40 mm ¦ 120 mm* – For workpiece thickness 41-60 mm ¦ 150 mm* *Depending on workpiece length – Workpiece overhang ¦ 38 mm – Workpiece thickness ¦ 8 – 60 mm – Edge height max. = workpiece height ¦ + 6 mm – Edge material, roll ¦ 0.4 – 3 mm – Edge cross-section max. – For PVC ¦ 135 mm² – For veneer ¦ 100 mm² – Roller diameter max. ¦ 830 mm – Edge material, strip ¦ 0.4 – 8 mm – Edge cross-section max. – For strips ¦ 360 mm² – Feed rate ¦ 8 – 14 m/min – Max. feed rate with shaped milling head ¦ 11 m/min – Working height ¦ 950 mm – Pneumatic connection ¦ min. 6 bar – Overall length ¦ 5,573 mm Complete description: see PDF

Condition: used, machine/vehicle number: 008363, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Djdpfex Swddex Apdokn

Condition: used, Year of construction: 2008, Connected load: 11.5 kW Feed rate: 11 m/min Workpiece thickness: 8 - 60 mm Djdozab Riopfx Apdokn Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Dust extraction diameter: 1x 120 / 2x 100 mm Working height: 950 mm Dimensions: 5860 x 1560 x 2300 mm Weight: approx. 2600 kg Location: Customer

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Djdpfx Aovvkd Topdjkn Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Dkedpjvvkfwjfx Apdsn Storage location: Nattheim

Condition: used, Year of construction: 2007, with edge gluing: workpiece thickness: 8 - 50 mm, edge thickness: 0.4 - 3 mm, fixed lengths: max. 3 x 45 mm, feed rate: 11 m/min, connection value: 10.5 kW, compressed air: 6 bar, weight: approx. 1250 kg, machine length: 3920 mm. Dsdpsy Tpz Djfx Apdekn Storage location: Supplier.

Condition: good (used), Year of construction: 2004, The machine is equipped with a joint milling unit, cross-cutting unit, 2 saws, milling station, corner copying, radii with flat scraping blade. Total connected load: 10 kW, compressed air connection: 6 bar. Air consumption per cycle: 43 l/min. Dimensions: 4740 x 1635 x 1706 mm. Body dimensions: 3100 x 1040 x 1706 mm. Edge thickness: 0.4 – 8 mm. Good condition. Djdpfxoyl Uure Apdokn Transport available at extra cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 1,400 h, power: 11.5 kW (15.64 HP), workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, total length: 5,860 mm, Single-sided edge banding machine, right-handed version For hot-melt adhesive bonding. Quick-change adhesive unit for hot-melt glue. Can process PU adhesive granulate in compliance with adhesive processing regulations. Glue reservoir positioned leak-proof below the glue roller. Precisely metered glue application to the workpiece via glue roller; no adjustment required for varying workpiece thickness. Selectable glue roller rotation: co-rotating or counter-rotating direction. Glue temperature monitored via electronic thermostat. Automatic glue temperature reduction during work breaks. Infrared hot-melt adhesive activation. Automatic edge magazine for rolls and fixed lengths, including roll holder, Ø 800 mm. Equipped with reinforced pre-cutting shears for thick PVC/ABS, max. 3 x 45 mm. Centrally adjustable top pressure. Control panel at machine infeed. Electronic control system: power control PC 20+ BRANDT control system with color graphics user interface for easy and convenient operation and programming. Technical details: - Tiltable operator panel at machine infeed - Durable short-stroke membrane keyboard - Color graphic flat screen - Industrial PC with Compact Flash disk as mass storage - Aggregated function keys with LED status indicators - Color pictograms to assist user navigation - Online language switching between various foreign languages - Display of essential machine target and actual states - Status messages in plain text - Easy selection and correction of position points - Simple axis adjustment (with suitable unit configuration) - Online help in plain text via accessible help menu - Production data acquisition for production time, edge length, and workpiece count—daily and total values - Inspection and maintenance interval display - Remote service capability via integrated modem and installed service software - Save processing programs - Production according to processing programs - Data backup of processing programs Dodpfx Ajyud S Eopdokn

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Dksdpfxox Swf Uj Apdsn Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20

Condition: used, BRANDT KDF 430 Edging Machine Pre-milling cutters Replaceable trimming unit Edge gluing with a roller Pneumatic preliminary trimming cutter Pressure rollers Final trimming blades Adjustable top-bottom milling unit R1-R2, motor-driven Corner rounding unit Profile trimming unit Dkjdpfx Aezarz Ejpdsn Flat trimming unit Polishing unit Max. workpiece height 60mm Max. veneer thickness in roll 3mm Feed rate 8-14m/min Machine length 480cm Machine inspected, ready for operation

Condition: excellent (used), functionality: fully functional, Selling an original Homag Group glue application unit (upper part with glue application roller and drive coupling) for edge banding machines of the Brandt / Homag brand. The unit is in good, clean condition with normal signs of wear and tear (see article photos). It features the practical quick-change system, including the corresponding locking pins (ball handles) and the original Harting connector. Dkedpfx Apsy Uv Umsdjn Technical data & details: Manufacturer: Homag Group / Brandt Part number (engraved): 4-030-15-0531 (4030150531) Components: Knurled glue roller, metering slide for layer thickness adjustment, protective grille, high-temperature-resistant connecting cable with Harting connector, 2x locking pins. Suitable for: Many models of the Brandt Optimat series (KDN / KDF / Ambition, etc. – please check the part number with your machine beforehand).

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Header unit Gluing system Edge pressing unit Edge trimming unit Rounding unit Edge scraper unit Dkedszbicpepfx Apdsn Glue scraper unit Available in May 2026

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Dsdpfx Asy Ruzqopdokn

Condition: good (used), Year of construction: 2014, Description: see machine photos. Djdey Tm Nfspfx Apdskn

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Dedpfxsw S Dmds Apdskn Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain Dedpfx Apsc Tmygedokn quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Edge banding machine KTD51 for profile strips and straight edges, with direct glue application. Minimum workpiece length: 160 mm, workpiece thickness: 10 – 40 mm, edge thickness: 0.5 – 1 mm, minimum internal radius approx. 25 mm. Year of manufacture: 1993, feed speed adjustable 4 – 9 m/min, 2.6 kW, 400 Volt. Transport available at additional cost! Dkedpfx Aovf H I Tepdon Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Pre-milling aggregate Glue station for granulate Pneumatic pre-cut guillotine Trimming unit with two saw blades Profiling milling unit with profile cutters Profile scraper Polishing units Dedjx I A Dujpfx Apdjkn Year of manufacture: 2009 Machine length: 3.7 m

Condition: excellent (used), Year of construction: 2007, About the machine: Workpiece thickness: 8 - 50 mm Edge thickness: 0.4 - 3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3150 mm No jointing Dkedpfx Asy Sphbjpden Pre-trimming Flush cutting Radius and flush milling Radius scraper blade

Condition: used, machine/vehicle number: 006216, Type of edging: Thin edge, Thick edge, Solid wood Dksdpjy Nk Ahsfx Apdsn Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min

Condition: used, machine/vehicle number: 007834, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Dodpfx Apsv Sf I Eedjkn Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 007985, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Dodpfxox A Th Ds Apdskn Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Dsdowuz E Repfx Apdokn Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr