Used Throughfeed machining centers for sale (133)

Condition: used, machine/vehicle number: 007247, Maximum edge height: 3 mm Bwsbvmkqet H Twyo Isl

Condition: used, Year of construction: 2014, No. 3160 CNC machining center Gannomat Protec 0571A Used, year of manufacture 2014 According to previous owner, machine has run very little Machining unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 4 horizontal drilling spindles in X - 1 grooving unit in Y Fourth drilling axis in Y Milling unit Profit, 4.5 kW, 3000 - 18000 rpm with frequency converter Workpiece sizes and weights: - Workpiece width (X) min. 60 mm / max. 1000 mm - Workpiece thickness (Z) min. 6 mm / max. 60 mm - Workpiece length (Y) min. 250 mm in throughfeed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight max. 75 kg Air connection 6 bar Electrical connection 400 V, 3 Ph, 50 Hz, 11 kVA, 16 A Bebvmkqotza N Ej Iewl Fuse protection 32 A Control voltage 24DC V Operating pressure 0.8 MPa / 112 psi - Counter-pressure device from above - Roller table 765 mm (Y-axis), foldable, for machine front, 500 mm W - Roller table 765 mm (Y-axis), foldable, for machine rear, 500 mm W - Auxiliary fence 600 mm with integrated rollers for roller tables - Tool set Protec: 1 HW roof point drill bit Ø 5x70 mm (NL 35 mm) left; 3 HW dowel drill bits Ø 5x70 mm (NL 35 mm) right; 4 HW dowel drill bits Ø 5x70 mm (NL 35 mm) left; 5 HW dowel drill bits Ø 8x70 mm (NL 35 mm) right; 3 HW dowel drills Ø 8x70 mm (NL 35 mm) left; 2 HW dowel drills Ø 10x70 mm (NL 35 mm) left; 1 HW cup drill Ø 15x70 mm (NL 35 mm) left; 1 HW cup drill Ø 20x70 mm (NL 35 mm) right; 1 HW cup drill Ø 35x70 mm (NL 35 mm) right - TC slot milling cutter Ø 125/30 mm, slot milling width (SB) 8.3 mm, Z = 18, LI, LEUCO - Indexable insert end mill, Z1+1 HW with WP drilling cutter (D) Ø 20 mm - ASCII import postprocessor for "GANNOMAT-EDITOR" programming system for importing ASCII files, structure specification by Gannomat - Extraction manifold Ø 160 mm / Ø 80-80-80 mm, 196 mm grid Sale On behalf of customer, ex location near Nittenau, without disassembly, without transportation and assembly Errors in description and price excepted Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as seen" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2011, Assembly line with WEEKE and LIGMATECH machines. - Built in 2011 - Available from approximately May 2025 - Complete assembly line for cabinet furniture consisting of WEEKE ABL220, ABL210, BHH400, ABH120, IGELPUFFER, 2x LIGMATECH MDE160, FANUC M-710 robots, and various automation systems. Bwjbvmkqev Tmcge Ijl - Touring possible, line is still in production.

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: BR07440, Vektor 25-18 Bebvmsvxqggokq Ijwl

Year of construction: 2011, Condition: as good as new (ex-display), I sell the automatic CNC working centre for BLOCK-HOUSE production Stromab Autoblox. Year 2011. New machine. Incutting saw 600mm / 7,5kW Dowel drilling unit up to dia.35mm x depth up to 320mm Tenoning head up to dia.230mm / 4kW Bwsbvmksgiwkujq Isl Horizontal milling up to dia.230mm / 4kW Vertical milling up to dia.180mm / 4kW Automatic feeding system +-1mm Suitable for wooden house constructions! Available immediately.

Condition: excellent (used), Functionality: fully functional, CNC machining centre model ALBERTI POLAR CN second hand machine 5 axes Bwebvmkqev Tv A As Iel technical data as per catalogue photo

Condition: used, Year of construction: 2008, Biesse Works Advanced Control Working range on X-axis mm 4600 Working range on Y axis mm 1535 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop Vacuum system for optional nesting processing (worktops not included) No. 8 electronically adjustable EPS bars - for suction cup support No. 6 pneumatic bakelite bars for lifting the panel No. 4 electronically adjustable EPS suction cups for each bar with vacuum seal for fixing the panel during the processing No. 1 5-axis vertical electrospindle, with automatic tool change, 12 kW motor, liquid cooling, cones Hsk type Drilling head with vertical and horizontal spindles Fixed integrated blade in X-axis Automatic tool change system with 33 positions - positioned on the back of the machine Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Automatic lubrication system Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h Bwobjvy Sl Tjvmkq Iol

Condition: as good as new (ex-display), Year of construction: 2023, MAGGI_TECHNOLGY CENTER Maggi Sales price € 36,500,- DEMO MACHINE immediately available € 24,500,- Super Offer MAGGI-Technology GT800 easy programmable drilling machine. Perfect for the needs of the small professional, who wants to make a qualitative leap with a limited investment. For the production of custom-made kitchens and furniture. – High precision, flexibility and production capacity. Bebvmkjtr Awgjq Ijwl – Easy to program software – Configurable machine: choose your solution! – Fully automatic – Compact 3 m² – Easy maintenance, automatic shaft lubrication, lower consumption Technical features Programmable drilling machine with simple and intuitive software, 3 controlled axes X, Y, Z, with the possibility of channel cutting, milling and angling panels (accessory) processing from under and through panel. Panel treatment with gripper and automatic shaft lubrication. Machine built according to CE regulations

Condition: as good as new (ex-display), Year of construction: 2024, max. workpiece length X:: unlimited Min. workpiece length X: : 250mm Traversing speed X:: 0-25 m/min. Max. workpiece length Y: : 1,000 mm Min. workpiece width Y: : 85mm Traversing speed Y: 0-50 m/min.: 0-50 m/min. Max. tool thickness Z: : 60 mm Min. workpiece thickness Z: : 10 mm Traversing speed Z: : 0-20 m/min. Vertical spindles Y - direction: : 5 pieces Horizontal double drilling spindles X - direction: : 2 + 2 pieces Horizontal double drilling spindles Y - direction: : 1 + 1 piece Units: : 16 mm drilling head Special equipment: Clamex package, door package Bwjbver Hbhvjmkq Iel Drill spindle speed: : 4,000 rpm. Distance drill spindle: : 32 mm Motor power: : 1.7 kW Grooving saw: : X - direction Saw blade Ø: : 125 mm Suction connection Ø: : 150 mm Dimensions (LxWxH): : 1,920 x 2,818 x1,620 mm Weight: : 1,500 kg

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 11134, Used HUNDEGGER K2-625. CNC DESIGNED FOR MACHINING OF WOODEN BEAMS Loading area with 7 transversal motorized chains. Maximum length of beams at infeed: 13.000 mm Maximum length of beams at exit: 12.000 mm 2 independent grippers for transport and positioning: "two-hand" system. Maximum working cross-section 625 mm x 300 mm Disk saw unit, diam. 800 mm. 4 axes. UNIVERSAL milling cutter unit with double exit. 4 axes. Upper vertical milling unit. Lower vertical milling unit. Lower vertical drilling unit with multipurpose support. Horizontal drilling unit with multipurpose support. Horizontal long chain sprat unit, 900 mm, with counter-support system. Bsbvmkqev Invke Iswl Hydraulic unit for automatic beam turning with maximum cross section 440 mm x 300 mm. Unloading area with 6 arms for the parking and storage of the pieces. Spare tools included Independent control panel. CE STANDARD Used machine, registration number 11134 and year of manufacture 2001, in perfect working condition.

Year of construction: 2007, Condition: excellent (used), Used CNC machining center incl. hedgehog buffer Manufacturer: Weeke Type: Optimat BHX 500 year of construction 2007 Technical data: Workpiece length min. - max. mm 200 - 2500 workpiece width min. - max. mm 70 - 1000 workpiece thickness min. - max. mm 4 - 80 Workpiece stacking max. pcs. 2 Configuration 2V36, 2H8X/2Y, N2 X-Y 90, F2-ETP-6 KW Drilling spindles vertical per side, pcs. 36 Drilling spindles horizontal per side, in X-direction 8 Drilling spindles horizontal per side, in Y-direction 2 Grooving saw X-Y swiveling 90°, per side YES Milling spindle, per side, kW 6 Integrated options - Extension package vertical drilling spindles - Insertion table with automatic workpiece feeding and positioning Bwsbvmkqsiy Di Is Ijl - Length measurement in the machine - barcode software - Hedgehog buffer (description below) Technical data hedgehog buffer Number of buffer places 30 Workpiece dimensions length 250 - 3000 mm width 100 - 1000 mm Thickness 12 - 80 mm Length over all Approx. 5700 mm Useful width Approx. 2000 mm Takeover height Approx. 950 mm Pick-up height / document height Approx. 1120 mm Pitch Approx. 125 mm

Condition: excellent (used), CNC-Gantry Flexible Automatic through-feed Boring Machine with Dowels inserting system Movable panel (horizontal position of workpiece/panel), movable working head Numerical Control Power Control, Software WoodWOP Bjbvmkqsd Nvi Do Iewl Overall integral safety cabin (enclosure) of the machine Panels (workpieces) feeding by motorized belts 3 Feeding speed (m/min) 1 - 90 (ca.) Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1400 x 60 Maximum stroke of the axis (X - Y - Z) mm 3580 x 1838 x 125 Two panels simultaneously processables (in Y axe) mm 600 + mm 600 Total installed power (Kw) 38 WORKING GROUPS (TOP): Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 38 + 3 special Independent horizontal boring spindles (No.) 6 Circular Grooving Saw (on X axis) dia. (mm) 100 Vertical electro-spindle (No.) 1 x SK 30 (Vertical electro-spindle motor power (Kw 6) Automatic Tools Changing System, Tools storage plate (No. 3 folds- positions) WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles (No.) 2 Horizontal drilling spindles - Right side (No.) 13 + Left side (No.) 13 Inserting nozzle and glue injectors (Right side) No. 2 + (Left side) No. 2 Storage tanks for automatic feeding of the dowels (No.) 1

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, 4 axis nesting cnc machine for cabinet building - consists of 4 parts - part 1: automatic plate lift - part 2: automatic label machine - part 3: 4 axis CNC - part 4: automatic discharge table - 4 parts work together - including extraction installation - including vacuum pump CNC bed - compatible milling head ISO30 ER32 - including 3D cabinet program (Haixun software) Haixun quick design + Haixun quick production included - spare parts and labels included in this lot - dimensions control cabinet 80x60x 190 cm - dimensions extraction: 140x80x 140 cm - dimensions label machine: 4000x2700x1800 mm Bwobjv Dupvevmkq Iol

Condition: used, Year of construction: 2008, In daily use, some maintenance should be expected as this is a used older machine. Known issues: In some cases, the pusher does not push the workpieces all the way to the zero point. Some spindles in the drilling unit do not return down in time, causing broken drills. This happens sporadically, affecting approximately 3-4 spindles in both the upper and lower drilling units. Occasionally, we also experience crashes in the editor program, requiring a restart. Bwobvmkqovz S Tao Iol Equipment: 2 drill cases, 2 routers, and 2 saws. As you can see in the picture, a large return track is included. It is possible to test drive here at the factory. The buyer must disassemble and collect the machine themselves.

Condition: used, Year of construction: 1997, Functionality: limited functionality, It needs sensor repair. Bsbvjvt Ntbemkq Ijwl

Condition: excellent (used), Year of construction: 2014, Used HOLZ-HER Evolution - available immediately - Year of manufacture 2014 - Campus software - Drilling head = 13 vertical, 6 horizontal, grooving saw in x spindle 10.3 KW - 6-way tool changer - Hand control unit - Scanner - 21.5 'monitor Bwjbev A Ibcjvmkq Iel - Workpiece length measuring unit

Condition: used, Year of construction: 2015, operating hours: 1,100 h, Functionality: fully functional, machine/vehicle number: AAAJ0018, feed length Y-axis: 1,000 mm, Working area Y: 1,000 mm Working area Z: 60 mm 16 mm drilling head with 10 vertical drilling spindles 4 horizontal drilling spindles in X direction and 2 horizontal drilling spindles in Y direction (motor 1.7 KW) Groove in X direction Max. saw blade diameter 125 mm (motor 1.7 kW) unequipped Disassembly, delivery and commissioning could be carried out by our machine supplier. Bwjbvjv D Hb Rjmkq Iol

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PowerControl (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machines with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) With pushing system to automatically infeed the workpiece Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 2500 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y) WORKING GROUPS (BOTTOM) Bwsbvmkqslkdpmj Iel No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y)

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Bebvetr D T Asmkq Iswl Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: good (used), CNC-drilling and dowel insertion machine HOMAG WEEKE MOD ABD050 OPTIMAT for horizontal drilling/drilling and doweling. The machine can be used as a stand-alone machine or in connection with CNC-machining center. Realization: - ABD 050/12 Technical data Bwjbvmkqsrlngkj Isl - workpiece length - ABD 050/12: 20 - 1,250 mm - workpiece width: 50 - 800 mm - workpiece thickness: 10 - 60 mm Equipment features - high-speed dowel and spindle drilling aggregate - vibrating conveyor for automatic dowel loading of standard dowels (8 x 30/35 mm) - lateral anchoring and central stop pneumatically lowerable - manually adjustable tensioning cylinder in length and thickness for workpiece clamping - ABD 050/12: 4 tensioning cylinder - glue - low pressure pump - space occupation for up to 4 workpieces

Condition: good (used), CNC machining center WEEKE OPTIMAT BHX 500 Incl. material feed “IgeL-ROBOT” Bwebvmkjtd Uufjq Iel Below machining support Top machining support Workpiece length: min. 250- max. 2500 mm Workpiece width: min. 70- max. 1000 mm Workpiece thickness: min. 4 mm – max. 80 mm Workpiece stacking: max. 2 pieces Vector speed: X-axis collets = 138 m/min; Y-axis = 80 m/min; Z-axis = 50 m/min Equipment: VERTICAL DRILLING UNIT 2 V 21 HIGH SPEED 7500 HORIZONTAL DRILLING UNIT 2H4X/ 2Y GROOVE SAW UNIT N2 X-Y 90 MILLING UNIT F2-ETP- 6 KW Barcode reader manufacturer: Datalogic Material feed “IGEL-ROBOT”

Condition: new, Functionality: fully functional, Fast universal talent for furniture construction and more 9 controlled axes High axis speeds: 130 m/min / X-axis Bsbvmkjtu I Ntoq Iewl 75 m/min / Y-axis Machining of even the smallest parts (from 70x35 mm) Genuine 6-sided machining 2 automatic, independently controlled clamping grippers Horizontal machining also from the gripper side 3 independent drilling heads with a total of 47 drilling spindles grooving saw unit Milling spindle top and bottom Air cushion table in the infeed and working area Panel return in the outfeed Barcode scanner

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), movable working head. Vertical position of the panel (workpiece) Numerical Control TPA - Software Albatros Safety cabin (enclosure) of the working head Panels feeding by motorized chain/track Rubber-coated vertical rollers as fence and feeders during workpieces process In-feeding table (with motorized belts) - Out-feeding table (with motorized belts) With workpiece return system to the operator (180°) Min. useful working area (X - Y - Z) mm 260 x 40 x 10 (ca.) Bjbvmjihfiiokq Iswl Max. useful working area (X - Y - Z) mm infinite x 1300 x 80 (ca.) Separate electric and command cabinet Total installed power (Kw) 35 WORKING GROUPS: Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 24 (7 in X + 17 in Y) Drilling heads with horizontal spindles (No.) 2 Independent horizontal boring spindles (No.) 36 (9 LEFT + 9 RIGHT = 18 x 2) Drilling head motor-power (Kw) 3 x 3 (ca.) Vertical electro-spindle (No.) 1. Vertical electro-spindle motor power (Kw) 7,5 (ca.) Automatic Tools Changing System Revolver, with Tools storage plate (No. of folds-positions) 10

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head. Horizontal position of the panel (workpiece) Numerical Control Xilog Plus 2 (Software Xilog Plus 2) Safety cabin (enclosure) of the working head. Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) With pushing system to automatically infeed the workpiece In-feeding table (with motorized belts) and Out-feeding table (with motorized belts) Bjbofz I Ufevmkq Iswl Minimum workpieces dimensions (X - Y - Z) mm 250 x 70 x 10 (2 x 5 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1300 x 80 (2 x 40 mm) Two (2) panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Inserting nozzle and glue injectors. Storage tanks for automatic feeding of the dowels

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) - Goose-neck type - Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) - Numerical Control with Software Biesse Works - Safety cabin (enclosure) of the working head - Front emergency carpets - No. 1 In-feeding table (with motorized belts) SX - No. 2 Workpieces fixing clamps (for the panels introduction in the working area) - No. 1 Out-feeding table (with motorized belts) DX - Max. useful working area (X - Y - Z) mm 3000 x 1000 x 60 - Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (for longer panels than mm 2000, minimum thickness is mm 13) Bwobvsdh Tf Usmkq Iel - Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1000 x 60 - Total installed power Kw 20 BOTTOM WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe) TOP WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe)