CNC machining center incl. hedgehog buffer

Weeke Optimat BHX 500

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-250-12-2554, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, TECHNICAL DETAILS Minimum part dimensions (X, Y, Z): 250 mm x 100 mm x 8 mm Maximum workpiece dimensions (X, Y, Z): 3,000 mm x 1,000 mm x 80 mm Upper vertical working head Number of vertical electrospindles: 1 Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) Lower vertical working head Number of vertical electrospindles: 1 Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS CNC control: PC 85 Software: woodWOP 6 Electrical data Voltage: 380 V Frequency: 60 Hz Phases: 3 Power: 62 kW Current: 125 A Ndjdpfx Aboxx R Sloxsd Control voltage: 24 V EQUIPMENT Simultaneous processing of two panels Safety enclosure for the working head No. 2 clamps for fixing and moving the workpiece Loading station with air cushion Discharge of panel(s) via motorized roller conveyor Safety system with perimeter fencing and front safety mats

Condition: used, machine/vehicle number: 007134, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Nodpfot Hmtzsx Abxedd Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Year of construction: 2011, condition: ready for operation (used), Main Drive Number of axis 3 Ndodpfx Aboxqh T Djxsd This 3-axis HOMAG WEEKE OPTIMAT BHX 500 was manufactured in 2011. It features a robust CNC processing center with a working area of 2500 mm by 1300 mm, main electrospindle power of 6 KW, and a maximum panel thickness of 80 mm. It includes 84 drilling spindles and dual milling spindles, each offering 6 KW at 18000 rpm. If you are looking to get high-quality CNC capabilities, consider the HOMAG WEEKE OPTIMAT BHX 500 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: good (used), Year of construction: 2008, functionality: fully functional, Homag Weeke Optimat BHX 500 20KW Center Machine in excellent condition Viewable in department 14 Ndsdpfxsw A R Iqs Abxod Dismantling, loading, and transport at buyer's expense

Condition: like new (used), Year of construction: 2019, I sell the horizontal throughfeed CNC working centre Vitap Point K2 2.0, Year 2019. Configuration: 1 pc. milling spindle 5,0 KW 12 + 4 + 4 pcs. drilling units 1 pc. grooving saw Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Workpiece max. dimension - x 1250 x 50 mm Workpiece min. dimensions 270/400 x 185 x 4 mm Total area covered: 2900 x 1650 mm Total weight: 950 kg. With full documentation and CE. Nedpfxevx Dz De Abxodd Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Single-sided laser and PU edge banding machine including workpiece return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): 0.4 – 20 mm Control: PC22 Control system: Powertouch Units and gluing Jointing cutter unit S2 Automatic horizontal adjustment for jointing cutter Automatic vertical adjustment for jointing cutter LaserTec activation unit Performance Basic gluing station A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll plate Continuously adjustable edge pressure device Vacuum device for strip singulation Servo edge feed Edge thickness measurement for coiled material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Wetting system for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 bevel/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Automatic adjustment for end trimming stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-milling unit MF21 servo Release agent spraying unit top Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of Glue joint scraper Ndedpfx Aboxgrfpsxed Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Edge banding of solid wood edges Automatic adjustment of infeed fence Infeed extension 500 mm Sliding carriage Scissor-type workpiece support Scissor extension Workpiece thickness 8 mm instead of 12 mm Potential-free contact Flexible edge sequence control software Set-up-in-the-gap Workpiece return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Condition: good (used), CNC-drilling and dowel insertion machine HOMAG WEEKE MOD ABD050 OPTIMAT for horizontal drilling/drilling and doweling. The machine can be used as a stand-alone machine or in connection with CNC-machining center. Realization: - ABD 050/12 Technical data - workpiece length - ABD 050/12: 20 - 1,250 mm - workpiece width: 50 - 800 mm - workpiece thickness: 10 - 60 mm Equipment features - high-speed dowel and spindle drilling aggregate - vibrating conveyor for automatic dowel loading of standard dowels (8 x 30/35 mm) - lateral anchoring and central stop pneumatically lowerable - manually adjustable tensioning cylinder in length and thickness for workpiece clamping Nodpfx Aerlngkobxodd - ABD 050/12: 4 tensioning cylinder - glue - low pressure pump - space occupation for up to 4 workpieces

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements depth 7845 mm Machine weight 5000 kg Additional Equipment HOMAG gluing and finishing components This HOMAG KAL 210 AMBITION 2264 edgebander was manufactured in 2010. It features a max glued edge thickness of 20 mm, edge gluing height up to 60 mm, and a max feed speed of 25 m/min. Equipped with a granulate glue system, preheating zone, and various processing units including a joint trimming and corner rounding unit. Consider the opportunity to buy this HOMAG KAL 210 AMBITION 2264 edgebander. Contact us for more information about this machine. Njdoxxndlopfx Abxodd Application Types Edge Banding

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container Nedpfx Aod Duvfebxsdd -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: HOMAG -Type: 0-380-03-0497 -Type: 2-006-51-2870 -electrically heated -Dimensions: 400/70/H225 mm -Weight: 10.6 kg