Used coordinate measuring machines for sale (364)

Condition: new, Year of construction: 2018, NEW PRODUCT at a special price Tactile coordinate measuring machine from Innometrik Measuring range 1200 x 3000 x 1000 Maximum workpiece weight: 1000 Kg Accuracy MPEE: 2.2 + L / 350 (in μm) Scale resolution: 0.1 / 0.5 in μm - Air bearings on all axes Linear speed: 300mm / s Volumetric speed: 520 mm / s Giodpfx Asdyl H Necfju Touch probe: Renishaw Tp200 incl. 3 modules (SF, HF, LF) and probe changer 3 compartment Software: OptiCheck 4.5 & Virtual DMIS (separate partitions) Optionally Polyworks according to customer requirements -Incl. PC (Windows 7) Alternatively Windows 10 -Incl. 2 monitors -Incl. Mouse keyboard Picture: sister device

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head ✅ Stylus rack / magazine ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console Gijdpfxeyzmbde Acfeu 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 199102, WENZEL LH 108 CNC Coordinate Measuring Machine Manufacturer: WENZEL Type: LH 108 Design: CNC 3D coordinate measuring machine (bridge design) For sale is a precise and powerful WENZEL LH 108 coordinate measuring machine. This machine is ideally suited for quality assurance, production metrology, and demanding measuring tasks in tool and mold making. The LH 108 impresses with its stable granite construction, air-bearing axes, and high measuring accuracy. Thanks to CNC control, both single and series measurements can be carried out efficiently. Technical Data Measuring range: approx. X 1000 / Y 1600 / Z 800 mm Max. workpiece weight: up to approx. 2000 kg High measuring accuracy in the µm range Equipment Air bearings in all axes Granite guides for maximum stability Modern CNC control with joystick operation Various probe systems (depending on the model) Temperature compensation (model-dependent) Application areas Quality assurance and incoming goods inspection Series and single-part measurement Freeform surfaces and complex components Gedpfx Aey Tnyfscfoiu Reverse engineering Other Machine in used condition. Inspection possible by arrangement.

Condition: used, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, VideoCheck S 400x200 3D CNC Year of manufacture: 2014 Measuring range: X = up to 400 mm Y = up to 200 mm Z = up to 250 mm Installation area: Depth: 770 mm Width: 778 mm + 400 mm travel Height: 1673 mm + 200 mm travel Giodpfxsxbifpo Acfsu Measuring device weight: up to 480 kg Max. workpiece weight: mmax = 40 kg

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, total height: 350 mm, type of input current: AC, total width: 550 mm, total length: 850 mm, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, overall weight: 10 kg, input voltage: 220 V, Equipment: documentation/manual, type plate available, HEXAGON ROMER Absolute Arm 7312 + PolyWorks 2025 Inspector Probing™ + HP ZBook For sale is a very well-maintained and lightly used HEXAGON ROMER Absolute Arm 7312 portable measuring arm, manufactured in 2015. The system was used exclusively in a metrology laboratory and is in excellent technical condition. Included in the sale is a fully configured HP ZBook industrial workstation laptop with current PolyWorks Metrology Suite 2025 / Inspector Probing™ software including transferable dongle license. The measuring arm is ready for immediate operation. Last calibration was performed on 12.01.2022. Technical specifications: * Model: RA7312 * Measuring range: 1.2 m * Arm weight: 10.2 kg * ISO 10360-2 * MPEp: 8 µm * MPEE: 5 + L/40 ≤ 18 µm Technical equipment / scope of delivery: * HEXAGON ROMER Absolute Arm 7312 * Absolute Encoder technology * Integrated digital camera and work light * Haptic feedback * Ergonomic handle * Zero-G counterbalance * Mounting plate * TESA TKJ * Probes with 3 mm / 6 mm ruby ball and 15 mm steel ball * Certified reference bar for 1.2 m measuring range * Total length 305 mm * Including certification * Calibration sphere * Magnetic mount * Transport case * Dust cover * B89 certificate Software / system environment: * PolyWorks Metrology Suite 2025 IR10.2 * Inspector Probing™ * Installed and fully operational software environment * Dongle-based license * Transferable license * Pre-configured measurement system * Ready for immediate use * ROMER arm fully integrated and operational Notebook / hardware: * HP ZBook Workstation * Intel Core i7 processor * 16 GB RAM * NVIDIA graphics card * SSD storage * USB 3.0 * WiFi / Bluetooth Transport / dimensions: * Portable measuring system * Total weight including transport case approx. 20 kg * External dimensions of transport case approx. 850 x 550 x 350 mm * Heavy-duty original transport case included Special features: * Used exclusively in metrology laboratory * Lightly used * Complete package * Ready for immediate use * Current software environment * Portable coordinate measuring technology * Precision measuring arm according to ISO 10360-2 * Ideal for quality assurance, reverse engineering, tool and mold making Giedpfsy Ta A Esx Acfsu Inspection and functional test possible by appointment. Sale preferably to commercial buyers. Subject to prior sale and errors excepted.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, measuring range X-axis: 440 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 410 mm, workpiece weight (max.): 227 kg, total height: 2,320 mm, type of input current: AC, total width: 1,160 mm, total length: 1,030 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, overall weight: 293 kg, input voltage: 220 V, table height: 930 mm, travel speed (max.): 21,000 mm/min, repeat accuracy: 0.003 mm, table load: 227 kg, compressed air connection: 4 bar, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, TESA MH3D DCC coordinate measuring machine (CMM) for sale in very good, well-maintained condition and ready for immediate use. Features: PC-DEMIS Pro for Windows Version 4.2 MR4 Release software (legally transferable) Current calibration and maintenance performed on 09/09/2025 Gisdpfx Ajy Taixecfsu Renishaw MH20i / TP-ES probing system Includes several probe extensions and accessories Including EM1 extension exchange module, L=70 mm (new price 07/2025: €1,255 net) 1x TP20 SF probe module (standard probing force) 1x TP20 EF probe module (high probing force for long probe combinations) Functional HP computer included Calibration and measurement records available Operating manual on CD Additional, functional Renishaw Brown & Sharpe TP-ES probe head Original TESA Star-i probe head (defective) Additional Renishaw MIP probe head (probably defective) Various styli included (see pictures) Condition: Granite table in very good condition Axes run smoothly and precisely No problems with the air bearings Machine has been regularly serviced Used only in a metrology laboratory Immediately ready for production and measurement Typical wear marks present on one side of the guide rail; purely cosmetic and without any technical restrictions Air bearings run smoothly, without jolts, and precisely Calibration is current and within specification Inspection and functional demonstration possible by arrangement. Suitable for quality assurance, incoming goods inspection, manufacturing metrology, toolmaking, CNC machining, or metrology service providers.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, measuring range X-axis: 5,500 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, total height: 3,650 mm, total width: 5,900 mm, total length: 6,220 mm, table width: 3,450 mm, table length: 6,020 mm, Our company offer for sale CMM Wenzel RS Plus 16/21, machine was used as a DEMO device for technicians training, and some measurements for our customers. The machine is equipped with a linear guide and tape measuring system, Renishaw for eventual assembly of the second column. Our company is able provide all necessary steps for moving and commissioning, calibration and an accredited test of accuracy. Measuring plate dimension: 6020x3450mm Probing system: probing head RENISHAW PH10M measuring probe RENISHAW TP20 Godpjwcytiofx Acfjiu CMM controller: Metrologic ME5008 or can be customised according to your needs CMM keyboard: Metrologic ME471 wired or can be customised according to your needs

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 x, y, z: 505 x 405 x 405 mm manual storage for measuring probes clamping plate calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation Giedsy R A Apjpfx Acfsu machine is powered up for inspection

Condition: excellent (used), Year of construction: 1990, Coordinate Measuring Machine MC 850 08/12/06 UHING Year of manufacture: 08/1990 Control: C98 Data system: Unix Workstation B2000 Dongle available: no Software: UMESS Unix 8.21 Gjdpfx Acoy Hrbyefsiu

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 135414, measuring range X-axis: 4,200 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, controller model: C99, No reserve price – guaranteed sale to the highest bidder! The machine is currently not operational. There are defects on the Y-axis and Z-axis. Further details can be found in the attached service report and calibration certificate. TECHNICAL DETAILS Measuring range X: 4,200 mm Measuring range Y: 1,600 mm Measuring range Z: 2,100 mm Measuring table: 5,000 x 1,800 mm Calibrated measuring volume X-direction: 4,200 mm Y-direction: 1,600 mm Z-direction: 1,600 mm MACHINE DETAILS Gsdpfx Acoy R Taxjfsiu Control unit: C99 EQUIPMENT Probe head: TP20 #5M2409 Measuring software: CMM-OS 5.4.00 CAA File: 03.06.2025 Calibration sphere: #134983 Note: The measuring computer HP Z420 Windows 7 can be supplied upon request. Please note this device has a virus infection caused by a hacker attack.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 800 mm, Measuring Range X Axis: 1,000 mm Y Axis: 3,000 mm Z Axis: 800 mm Granite Guides Air-bearing Axes Measuring Accuracy Linear measurement deviation approx. 1.3 µm plus L/400 depending on configuration and calibration status Probing Systems Renishaw probe heads possible Touch trigger and scanning PH10, TP20, SP25, SP80 depending on equipment Workpiece Weight Permissible table load up to approx. 2,000 kg depending on configuration Control CNC control with handheld operating unit Software Metrosoft CM version 3.112 Giedpfey Ewgxsx Acfeu WENZEL Quartis R16 Electrical Supply 230 V 50/60 Hz Power consumption approx. 1 kVA Pneumatic Supply Compressed air 6 to 10 bar filtered and dry

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Godpfjy Dcivjx Acfjiu Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: ready for operation (used), Year of construction: 2015, Measuring dimensions X/Y/Z: 400mm/300mm/200mm, measuring accuracy: 2.9+L/100µm, max. workpiece weight: approx. 30kg, machine dimensions X/Y/Z: approx. 1250mm/950mm/1700mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Gijdpfx Aoy R Dr Eecfsu

Condition: ready for operation (used), Year of construction: 2001, Table dimensions X/Y/Z: 4800mm/3000mm, measuring range X/Y/Z: 5000mm/2600mm/2100mm, grid spacing: 50mm, travel speed: 150mm/s, weight: approx. 540kg. Documentation available. An on-site inspection is possible. Gedpfx Aoy R Dr Sjcfeiu

Condition: ready for operation (used), Year of construction: 2017, A 3D coordinate measuring machine Hexagon is available. Measuring range X/Y/Z: 2200mm/1200mm/1000mm, swiveling head: TesaStar, probing system: TP20, probe length: 50mm, probe diameter: 5mm, temperature compensation: Clima, max. measuring speed: 300mm/s, machine dimensions X/Y/Z: approx. 3600mm/3450mm/2300mm, weight: approx. 5700kg, calibration: 02/2024. Documentation available. An on-site inspection is possible. Gjdpfjy R Drxex Acfeiu

Condition: reconditioned (used), Year of construction: 2026, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 Multisensor Measuring System equipped with camera, laser, Renishaw probing system, and Hexagon Vision 3D software (upgrade to Windows 11 and OptiCheck3D 2025 possible) Complete maintenance history available Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Delivery via factory service or forwarding agent, worldwide. Online or optional on-site demonstrations with customer parts, application-specific consultation by accredited Profitech metrology laboratories during project planning. Comprehensive service: – Delivery, installation, commissioning, accuracy verification to standard, certification, and extensive acceptance documentation. Individual training and education programs also available as online courses. Rental, hire-purchase, or financing available directly through Profitech without a financial institution. Measuring system can be individually configured to customer requirements. Gsdpexufk Usfx Acfoiu Measuring range for all sensors: 400x400x200 mm Dimensions: 800x1000x2000 mm Weight: approx. 800 kg Maximum load (glass plate): 30 kg Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measuring length in mm) Max. traverse speed: 250 mm/s Including camera Including rotary table Including laser Including LED ring light Including new frame grabber Including dual-monitor operation Including CNC control and PC Including Hexagon Vision3D software

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 20 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, table load: 20 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, High-precision optical measuring device with active vibration damping for use close to production. Complete acceptance before delivery including calibration certificate! Optionally available services: delivery, commissioning, on-site calibration, training, program creation for immediate start of measurements! Factory-refurbished premium multisensor measuring center with guarantee and warranty rebuilt 2025. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Gijdpfx Asdzzqwocfsu Delivery with factory service or forwarding agent, worldwide. Online - optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: - delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training programs can also be booked as online courses. Rent-hire purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements Measuring range of individual sensor: 250x200x200mm Measuring range of all sensors: 250x200x200mm Factory overhaul (Mahr Competence Center): 2024 New Windows 10 evaluation station Software: OptiCheck3D Version 4.5 Ultimate Maximum workpiece weight (glass plate): 15kg Scale resolution: 0.1μm Maximum speed: 150mm/s Dimensions: 800x700x1980mm Weight of measuring device: 450kg Weight of control: 90kg High-precision CMOS camera for digital measurements Renishaw TP20 touch probe system with SF insert module Accuracy according to VDI/VDE 2617 Sheet6, ISO 10360-2: U1=1.9 + L/200; U2=2.4 + L/150 ####Symbolic image of the manufacturer####

Condition: used, Year of construction: 2011, Measuring machine Zeiss MC 850, year of manufacture 2011 Gsdpfjy R S Nfsx Acfoiu

Condition: excellent (used), Year of construction: 2008, functionality: not functional, Faro Gage Plus measuring arm with 6 axes Arm length: 4 ft (approx. 1.2 m) Accuracy: 5+8L/1000µm Includes measuring table, accessories, and corresponding transport case Godpfxey N R U De Acfjiu User manual and manuals included No software included!!!

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Equipment: documentation/manual, type plate available, We are offering this very well-preserved Global Image coordinate measuring machine, year of manufacture 2003. Gijdpsy Nyr Ejfx Acfeu

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, MITUTOYO CRYSTA-Apex EX 9166T Coordinate Measuring Machine (900mm, 1600mm, 600mm), code No. (P/N): 191-294-30, Serial no. 60011258, MFG 2018 Measuring range: X-axis 900mm Y-axis 1600mm Z-axis 600mm Gsdey S Um Aspfx Acfeiu Drive speed - CNC MODE: Drive speed 8 - 300mm/s; Measuring Speed 1 - 10mm/s - J/S MODE: 0 - 80mm/s Resolution: 0.0001mm Guide method: Air bearings on each axis Table loading - Maximum height: 800mm - Maximum mass: 1500kg Mass (including the control device and installation platform): 2889kg Air supply: - Pressure 0.4MPa - Consumption: 60 L/min under normal conditions (air supply: 120 L/min) Very good working condition. The buyer will be responsible for disassembling and getting everything ready for shipping; we will only cover the necessary logistical support, like a forklift. Please make an offer. ExWorks Simeria, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), Year of construction: 2015, operating hours: 230 h, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, total height: 890 mm, total width: 986 mm, total length: 705 mm, overall weight: 170 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, SPECIAL OFFER with optional full service (delivery, commissioning) Technical data of the HEXAGON OPTIV CLASSIC 321 GL tp measuring machine Year of manufacture: 2015 Maximum traverse speed in X, Y, Z axes: 160 mm/s Gisdpfxjxfzzqj Acfeu Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in X, Y axes (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in XY axes (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in Z axis (optical sensor): Exy = (3.9 + L/200) µm Measuring accuracy in X, Y axes (touch-trigger probe): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in XY axes (touch-trigger probe): Exy = (2.5 + L/250) µm Measuring accuracy in Z axis (touch-trigger probe): Ez = (2.9 + L/200) µm Measuring volume (optical sensor): X 300 mm / Y 200 mm / Z 150 mm Measuring volume (tactile sensor): X 230 mm / Y 200 mm / Z 150 mm Dimensions (L x W x H): 705 x 986 x 890 mm Machine weight: 170 kg Equipment of the measuring machine: • 3-axis microprocessor CNC with vector path control • Metrology software: PC-DMIS Vision • Vision sensor for non-contact measurement of the smallest and most precise components • CCD camera with 6.5x motorized CNC zoom • DC servomotors • TESA probe system (1 body and 1 module) • Modular probe changer: TESASTAR with 4 slots and 4 modules • Linear guides on all axes • Coaxial LED top light (white LED) • LED backlight (green LED + diffuser) • Multi-segment LED ring light • Evaluation computer from Dell included Optional services: Delivery (surcharge) Commissioning (surcharge)

Condition: good (used), Year of construction: 2022, Equipment: type plate available, Technical Data - KEYENCE WM 3000 Additional Equipment - Measuring head WM 3000 - USB cable - Power supply - Measuring probe WMP3000 - Probe tip Ø 5 mm - Calibration device Gijdsw Sviqjpfx Acfou - Tripod - 3D-CAD additional software - Transport case - 4x batteries for measuring probe

Condition: good (used), Year of construction: 2019, functionality: fully functional, Equipment: type plate available, Technical Data - KEYENCE XM-1000 Additional Equipment • Measuring head incl. 1 probe with probe tip (4mm) • Measuring head incl. 1 probe with probe tip (4mm) • CAD add-on software • Extension cable • Mouse, keyboard and user manual in English and German Giodpfjw Svc Dex Acfsu Additional Information Machine Benefits o Technical machine benefits: Can be tested on site.

Condition: excellent (used), Year of construction: 2023, Mobile 3D coordinate measuring device Camera, manual probe with display Max. measuring length 10000/3500/3500 mm Certified measuring range 3000/1500/1500 mm Triple camera Integrated probe camera Measuring accuracy ±(28 + 5 L/1000) μm* Repeatability ±10 μm* Accessories Gsdpfjy Aypkex Acfsiu