Used Zeiss Coordinate Measuring Machine for sale (107)

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200008301032, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 280 kg, total height: 2,000 mm, total width: 1,100 mm, total length: 1,100 mm, overall weight: 500 kg, table width: 680 mm, table length: 855 mm, CARL ZEISS VISTA 1620-14 coordinate measuring machine Attention: The item must be collected on a date to be determined between October 7th and October 14th, 2026. The date will be finalized. Iodpfjzlg I Aex Achjaw FCA D-35576 Wetzlar – loaded onto a truck.

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Iasdpezii Dhsfx Achjw Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo VAST GOLD Year of manufacture: 2000 Retrofit 2024, last calibration 01/2025 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor Automatic probe changer magazine, 12-position Probe changing system, 20 positions Probe accessories Calibration sphere Reference probe HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software QS-Stat option Calypso upgrade and other options possible Further accessories and options available Available for immediate delivery Isdpozk Id Aefx Achjaw

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, Equipment: type plate available, Duramax Shopfloor Year of manufacture: 2011 Last calibration: 2/2026 Measuring range: X = 500 mm, Y = 500 mm, Z = 500 mm Length measuring deviation E0 in µm, E0/E40 in µm, MPE according to ISO 10360-2:2009: 2.4 + L/300 at 18°C - 22°C C99 control with BP26_SE operating panel Basic equipment: Shopfloor base VAST XXT sensor Probe changing magazine Probe changing turret Calibration sphere Probe accessories HP Workstation Z4 WIN 11 and monitor Machine folder and documentation Iodpfx Aew N Nfgocheaw Additional accessories Software: Calypso Basic 2025 Further options available Available on short notice

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC coordinate measuring machine Prismo VAST GOLD Year of manufacture: 2001 Retrofit in 2024 and 2026, last calibration 11/2023 Measuring range: X = 900 mm, Y = 1800 mm, Z = 700 mm In excellent technical and optical condition. Ijdezkhzhepfx Achjaw Device features, equipment: C99 control system with control panel Automatic temperature compensation VAST GOLD sensor Probe changer magazine, 17-position Probe changer, 20 positions Probe accessories Calibration sphere Reference probe HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software QS-Stat option Calypso upgrade and other options available Further accessories and options possible Available on short notice

Condition: used, Original ZEISS CMM Probe Holders and Stylus Extensions Original ZEISS probe holders Stylus extensions Various star styli and straight styli As shown in the pictures Condition: Used Good working condition Iajdpjzg Eczjfx Achew Carefully removed from a functioning ZEISS CMM Ideal for ZEISS CMM users looking for original replacement or additional probing equipment.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, 3D Coordinate Measuring Machine | Brand: MAUSER/ZEISS | Type: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally available with an air-conditioned hall. The machine has been calibrated regularly by ZEISS. The last calibration was performed on August 7, 2025, the next calibration (recommended) is scheduled for August 2026. TECHNICAL SPECIFICATIONS:: Measuring ranges (Length x Width x Height): 6.000 x 2.500 x 2.000 mm Travels: - X-axis: 6.000 mm - Y-axis: 2.500 mm - Z-axis: 2.000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5,0 + L/250)µm, V2 = 3,5 µm - Length measurement uncertainty according to ISO 10360-2: Iedey Iub Sjpfx Achoaw MPE_E = (5,0 + L/250)µm - Environmental conditions for maintaining the specified accuracy: * Temperature range: 21°C +/- 3°K * Temperature fluctuation: 0,5°K/h, 1,0°K/d, 0,5°K/m - Environmental conditions for operation: * Temperature range: + 15°C up to 35°C * Humidity: 30 up to 70% General features, Equipment: - Portal measuring machine with ultra-precision guides and ball-screw drives - Second Y-axis with granite guideway and air bearing - High-resolution Zeiss scales - Positive-drive mechanisms in all three axes - Collision protection for the quill and probe head (for VAST-TK) for manual and setup modes - Safety position for crane interlock - Reference temperature compensation - Microcomputer control - Practice piece: cube, star-shaped stylus - Reference probe D = 8 mm, length: 115 mm - Reference standard D = 30 mm - includes basic software package - Load-bearing capacity: Limited only by the foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2018, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, The system was hardly used (the order was cancelled). CMM DuraMax 5/5/5 ZEISS CNC coordinate measuring machine (CMM) with cantilever design. Maximum permissible length measuring deviation (MPE) according to ISO 10360-2:2009: - MPE_E0 (3D) = (2.4 + L/300) µm for 18 - 22 °C - MPE_E0 (3D) = (2.7 + L/250) µm for 18 - 26 °C - MPE_E0 (3D) = (2.9 + L/200) µm for 18 - 30 °C Maximum permissible scanning probe deviation (MPE) according to ISO 10360-4:2000 within the maximum permissible scanning test duration (MPT). MPE_THP = 2.9 µm within MPT_tau = 55 s. Single probe deviation form according to ISO 10360-5:2010. MPE_PFTU = 2.4 µm. Form measuring deviation according to ISO 12181:2011 (VDI/VDE 2617 Part 2.2). MPE_RONt (MZCI) = 2.4 µm. Iodpszb U Hajfx Achjaw

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head ✅ Stylus rack / magazine ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere Isdpfoyzmbdsx Achoaw ✅ BP26_SE control console 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: Ser. Nr. 151041, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, Multisensor Coordinate Measuring Machine O-Inspect O-Inspect O-I 442 Measuring range: X = 400 mm, Y = 400 mm, Z = 200 mm Length measuring deviation according to ISO 10360-2 with VAST XXT: MPE_E = (1.9 + L/250) µm, MPE_P = 1.9 µm Scanning performance according to ISO 10360-4 with VAST XXT: MPE_THP = 3.5 µm in 68 s Length measuring deviation according to VDI/VDE 2617 Sheet 6.1 for Discovery Zoom objective: MPE_E2D(OT) = (1.9 + L/250) µm Permissible temperature range for specifications: 19–21 °C Machine features, equipment:  Gantry-type measuring machine with a moving machine table  Table height approx. 850 mm  Path measuring system, 0.1 µm resolution  Integrated vibration damping  PC-based scanning control (ISC) integrated  Prepared for optical camera system Discovery Zoom sensor and tactile scanning probe VAST XXT TL1  Integrated through-light system  Numerical control panel, standard with rotatable tray  Calibration sphere D = 25 mm  Calibration ring Ijdpfxszg Ef No Acheaw  Regularly calibrated by ZEISS  Last calibration: April 2025  Complete calibration history available  Comprehensive accessory package including VAST XXT TL1, Discovery Zoom sensor, RT-OI Horizontal Complete, grid plate, glass frame, and Calypso software  Original ZEISS documentation available The machine has been regularly calibrated and inspected by ZEISS. Corresponding calibration protocols are available. Calibrations performed:  October 2009  November 2011  November 2013  January 2015  January 2016  January 2017  January 2018  February 2019  January 2020  March 2022  April 2023  April 2025 Note: The regular calibrations by ZEISS document the continuous maintenance and proper operation of the measuring system. The corresponding calibration protocols can be made available for review upon serious purchase interest.

Condition: used, Year of construction: 2000, Zeiss Vista measuring machine, manufactured in 2000. Iajdpfx Aezd Dkxechsw

Condition: used, 3-D coordinate measuring machine ZEISS NUMEREX - non-functional Iaedpfefy U Ewox Achow Granite measuring table, granite measuring plate, measuring table Model No. 3648-18, Serial No. X-1019, Year of manufacture approx. 1986 Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W 1525 x 1435 mm Usable area 1525 x 1100 mm Measuring plate thickness 305 mm Passage width in the portal 1100 mm Measuring probe mount Ø 9.5 mm Compressed air connection 6 bar Mains connection 230 Volt, 50 Hz - Granite plate with steel inserts with internal thread - Axis adjustment with pneumatic sliding guide for X, Y and Z axis - Plate on substructure with 5 adjustable feet, 3 support plates for the adjustable feet - Computer and software missing (not included and not part of the scope of delivery) → non-functional! Space requirement of the measuring machine L x W x H 1600 x 1850 x 2200 mm Weight of the machine approx. 2.8 tons Plate damaged on one side, see picture, otherwise in good condition.

Condition: ready for operation (used), Year of construction: 1986, Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement. Isdpfx Ajy T N H Tochjaw

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 135414, measuring range X-axis: 4,200 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, controller model: C99, No reserve price – guaranteed sale to the highest bidder! The machine is currently not operational. There are defects on the Y-axis and Z-axis. Further details can be found in the attached service report and calibration certificate. TECHNICAL DETAILS Measuring range X: 4,200 mm Measuring range Y: 1,600 mm Measuring range Z: 2,100 mm Iaodpey R Taxjfx Achjw Measuring table: 5,000 x 1,800 mm Calibrated measuring volume X-direction: 4,200 mm Y-direction: 1,600 mm Z-direction: 1,600 mm MACHINE DETAILS Control unit: C99 EQUIPMENT Probe head: TP20 #5M2409 Measuring software: CMM-OS 5.4.00 CAA File: 03.06.2025 Calibration sphere: #134983 Note: The measuring computer HP Z420 Windows 7 can be supplied upon request. Please note this device has a virus infection caused by a hacker attack.

Condition: refurbished (used), functionality: fully functional, Used machine retrofitted with new CNC-controller and new 3D-geometry-software The equipment of the measuring machine is freely selectable. We procure the right components from the customer "just in time". Iasdpfx Aoxzp U Dschsw Machine will be modernized with new controller, probe head, probes from Renishaw, PC and 3D software RationalDMIS. Technical Data: Measuring Range apprx: X = 1.000 mm - Y = 1.200 mm - Z = 600 mm Accurracy: MPEE : 1.9+L/300 according the manufacturers specification Illustrations still with original probe configuration Price on request >>> single machine - as long as available

Condition: ready for operation (used), Design: gantry design, measuring range X/Y/Z: 850mm/1200mm/600mm, measuring accuracy: 2.5µm/L250, repeatability: +/-3µm, machine weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Iodpfx Acjy Hk Ufjhjaw

Condition: excellent (used), The probe was used on a Zeiss Prismo Ultra as a replacement probe with few operating hours. Iaedpfjy Epm Iox Achow

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 153888, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, workpiece weight (max.): 20 kg, total height: 1,770 mm, type of input current: DC, total width: 1,351 mm, total length: 1,055 mm, year of last overhaul: 2022, ambient temperature (max.): 35 °C, ambient temperature (min.): 17 °C, Equipment: lighting, For sale: Optical-Tactile Measuring Machine The device is in excellent condition and has been serviced regularly and professionally. Calibration certificates are available. Technical data: Measuring range: 400 mm x 400 mm x 400 mm Year of manufacture: 2011 Sensor technology: Optical: ZEISS Discovery zoom lens Tactile: VAST XXT probing system Software: ZEISS CALYPSO Additional software: CALYPSO Freeform Surface BasLic; dongle-based basic license for the current software version Accessories: • Computer, mouse, keyboard, monitor • Smooth calibration sphere (for tactile probe) • Matte calibration sphere (for white light interferometer) • Calibration standard – optical • Calibration standard – tactile • 3 probes: reference probe, 3x50, 1x20 with 30 mm extension • DAkkS calibrated in 2022 • Software: Calypso 2019 dongle license • Tactile probe head • Optics • White light interferometer • 3-position probe change rack • Operating manual • Additional software: CALYPSO freeform surface, BasLic, dongle-based basic license for the current software version Transport and loading can be organized on request, at an additional cost, Europe-wide. Prices are subject to VAT. Viewing by appointment possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Gjbn N Ay Dowza Dxogoil Isdpfxsylkfao Achsaw Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, Including control panel, control PC, and software as shown in the pictures. EXW – self-collection on site. The purchasing company must sign a sales contract and disclose/confirm its beneficial owners. Furthermore, the signatory must complete a Postident identification. Iajdeyam S Sspfx Achew

Year of construction: 1999, condition: excellent (used), Technical Data Year of construction: 1999, upgraded for CNC capability in 2005 1 column pair Table is a single piece and self-supporting Total weight: approx. 12 tons Max. axial speed: 150 mm/s Measuring table Isdpfx Aoff Eaqjchoaw X = 7000 mm Y = 2850 mm Z = 600 mm Measuring volume X = 6200 mm Y = 1600 mm Z = 2100 mm Measuring accuracy Test report dated 20.04.2017: E = 50 + 40 µm/m, max. 120 µm EM = 70 + 40 µm/m, max. 140 µm P = 50 µm Accessories Control panel Dynalog P2 incl. stand Control system C99 2 RDS CAA swivel heads with CAA file 2 sets of RDS plate connectors Zeiss RST Other Boreholes for positioning system: several pilot holes Ø 22 mm in the rows Y+- 300 in a 300 mm grid in the rows Y+- 700 and Y+- 900 in a 200 mm grid Electrical power supply for machine: 230 V System requires 6 bar compressed air The machine can be upgraded with new software according to customer requirements. Price: on request! Installation and commissioning possible! We will gladly prepare a detailed offer for you!

Condition: excellent (used), Technical specifications Manufacturer: Zeiss Type: Carfit 42160025 Weight: approx. 5300 kg Iajdsgnyg Ejpfx Achow Measuring plate X = approx. 4000 mm Y = approx. 2000 mm Optional: available with Stiefelmayer measuring stand or SMM-C CNC! Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you. Note: Our offer is exclusively for specialist customers. (Subject to changes and errors in technical data, information, and prices, as well as prior sale!)

Year of construction: 2000, condition: excellent (used), Technical Data Manufacturer: ZEISS Type: SMM-C Year of Manufacture: 2000 Double-column machining center Measuring Range X = 6000 mm Y = 2 x 1100 mm Z = 2400 mm Equipment Control System: C99 Iasdpef S A Afsfx Achsw The machine can be modernized with new accessories according to customer requirements. Price: on request! Assembly and commissioning possible! We will gladly prepare a detailed offer for you. Note: Our offer is exclusively for professional customers. (Subject to changes and errors in the technical data, specifications, and prices, as well as prior sale!)

Year of construction: 1989, condition: excellent (used), Technical specifications Manufacturer: Zeiss Type: OMC 850 Year of manufacture: 1989 Measuring range X: 850 mm Y: 1200 mm Z: 720 mm The machine can be modernized with new accessories according to customer requirements. Ijdpfxjd Tx Umo Achjaw Price: on request! Installation and commissioning possible! We will be happy to provide you with a detailed offer! Note: Our offer is exclusively for professional customers! (Subject to changes and errors in technical data, information, and prices, as well as prior sale!)

Year of construction: 2008, condition: excellent (used), machine/vehicle number: 149720, Technical specifications Manufacturer: ZEISS Type: Pro T-Premium Year of manufacture: 2008 Single-column CMM Serial number: 149720 Measuring range Iedpfxjf S A Aie Achjaw X = 3000 mm Y = 1800 mm Z = 2100 mm Equipment Tactile probes C99 control system CMMOS software, Caligo Holos 3.0, DMIS The machine can be upgraded with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you. Note: Our offer is exclusively for professional customers. (Changes and errors in the technical data, specifications, and prices, as well as prior sale, are reserved!)

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 105220 & 105221, Technical specifications Manufacturer: ZEISS Type: SMM-C Year of manufacture: 1999 Double-column machining center Machine number: 105220 & 105221 Measuring table Stiefelmayer measuring table X = 6000 mm Y = 3000 mm Equipment ZEISS control system, year of manufacture 2007 The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you. Note: Our offer is exclusively for specialist customers. Isdpfx Acsgi D Nlsheaw (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)