Condition: excellent (used), Year of construction: 2012, back gauge travel distance R-axis: 2,700 mm, Bystronic Duodpfx Aevy Enzsf Den ZPG 2700 x 3500 VR SP 1AS 2011 2300 x 4500 mm 15 mm 60 mm 1000 kg S-IGL-2284 R-L

Condition: used, Info: Conveyor with air-cushion support TB-V-LK 1,5 x 1,3, 1300 mm long + Gas-filling & press robot ZP 1,6 x 2,5 VR SP G 1 AS, spindle driving, 2700 mm long Duedpfxevy Eyqe Af Dsn

Condition: good (used), Year of construction: 2010, functionality: fully functional, total length: 20,000 mm, Transport conveyers LISEC Transporteinheit 3300 x 4000 mm LISEC Transporteinheit S 3300 x 4500 mm LISEC Transporteinheit 3300 x 6800 mm LISEC Transporteinheit Mobile 3300 x 2800 mm Year: 2010 Pyrosil ST-SystemSt 1000 HD -1B System 500 HE (Pyrosil application for UV Ink) Pyrosil System 500 HE (Pyrosil application for UV Ink) Primer Station 500 HE LISEC Abluftanlage Vorbehandlung LISEC Anlagensteuerun S-LTD-235 Parmeter Flame: Berner speed 150 mm/sec 7,4 Hz Frequenz at FU 2 flows Sollwert Luft 400l/minVerhältniss Gas/Luft 1:21 Precursor 0,3 % Dodpfxjvy D Tij Af Dsun Parameter Primer: Speed Primer 300 mm/sec14,8 hz Frequenz at FU Flows 2 Druck vorratsbehälter 1 Bar Zerstäuberdruck 2.0 bar Sprühmenge 25 mi/min pro Sprühkanal Steuerdruck lower than 6 bar, has no influance at the Sprayvolume. Only the valces for sprayheads will be opened

Year of construction: 2021, condition: like new (used), functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulcan transport rollers. In vertical position transport rollers with Perumaan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Dusdpetwphwefx Af Don Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. The transport rollers are vulcanized and ground. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, total length: 2,500 mm, total width: 2,000 mm, working height: 2,000 mm, VSA-25/20D1 RTVB-11-20ST SSV-20 Dsdevyzatspfx Af Deun Lisec VSA-25-20D1 2000 x 2500 S-IGL-1878

Condition: used, Year of construction: 1989, total width: 1,600 mm, isec max 1600-6 mm Year: 1989 Working width - 1600mm. Glass thicknesses 2 – 26mm. Minimum glass size 350 x 180mm. Pre-spray over 1200mm long driven in feed conveyor. 3 wash sets each with a pair of cylindrical brushes, recycling tank, heaters. Dedpfx Afsvy D Ake Doun Tank withdrawal to left side, s S-WSH-383

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working height: 2,700 mm, Equipment: documentation/manual, Double glazing line R-L 2300 x 3500 with gas press 2700 x 3500 mm cy 2012 Dedpfx Afjvuhfle Deun

Condition: used, Year of construction: 2007, 26 Kw 8 Bar Dusdpotwn Dkofx Af Dsn 400 V - 50 Hz 3-55 mm 4600 kg 0,3-5 m/min spindles 13 3 – 35/ 55 mm Min. glass 35 x 150 mm Max. glass weight 2000 Kg

Condition: used, Year of construction: 1998, functionality: fully functional, working height: 2,500 mm, vertical glass washer LISEC VHW 2500 V 6 Dedpfx Afjtwn Hlo Djun

Condition: good (used), Year of construction: 2005, Sealing robot VA 1K-V 2300 x 4500 mm VR MOD PU ZD 15-60 mm 1000 kg Dsdpfx Afotwpats Deun

Condition: used, Year of construction: 2011, functionality: fully functional, Bystronic / 2300 x 4500 mm R-L 2300 x 4500 mm ( doch neu presse in 2011 von 2700 x 3500 mm) 15-60 mm Duedpsrr Tmcefx Af Den 1000 kg Washer GW D 2300 VR 3 B 15 Gas press ZPG 2700 x 3500 mm VR SP 1 AS 15-60 mm 2300 x 4500 mm 1000 kg cy 2011 Sealing robot VA 1K-V 2300 x 4500 mm VR MOD PU ZD 15-60 mm 1000 kg 1-Kopf Versiegelungsautomat / 1 / GMR Stock Place: GMR ES

Condition: used, Year of construction: 2007, functionality: fully functional, Lisec KSR 3000 x 5000 mm Dedpfxerr S I Ho Af Doun Left-Right

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport - tilting table (discharge) Description of Line Components Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulkollan transport rollers. In vertical position transport rollers with Perbunan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Duedpowii Hfofx Af Dsn Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency-controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Transport rollers, which are individually driven by worm gear wheels are placed on a solid welded frame. The transport rollers are arranged in drag bearings. Tilting arms are in horizontal position. The integrated tilting table is made of several profile arms which can be tilted (electro-mechanical by crank mechanism) from the horizontal position by 84°. The tilting speed has its lowest speed at the beginning and at the end of the movement. The glass is tilted from vertical to the horizontal position. If no glass happens to be in the Pre-Heating oven the glass runs into the oven.

Condition: used, Year of construction: 2011, functionality: fully functional, working height: 2,000 mm, Lisec superspace VSA 25 Duedpfxorr Sy As Af Dsn

Condition: good (used), Year of construction: 2007, System with 6 washing brushes (very good condition). With inlet and outlet transport section, fan for dry zone, water circulation, and heating tank. Working direction: From left to right. Washing machine height: 3650 mm. Washing machine width: 2800 mm. Inlet width: 1600 mm. Outlet width: 1600 mm. Washing machine weight: 3963 kg. Dusdjygiddspfx Af Djn Condition: Good, second-hand.

Condition: refurbished (used), Year of construction: 2009, Tilting rollebal table Lisec UKL 2500 x 3500 mm Dusdpfsyf E Uijx Af Don Left-Right reconditioned in 2022 vert good and clean condition

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, automatic gas press Left-Right cy 2007 reconditioned in 2022 very good and clean condition Duedpfx Afeyf E S Is Djn

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, RSV N 25/35 left-right 2500 x 3500 (4000) cy 2007 Duedpfx Asyf E Dkof Djn reconditined in 2022 very good condition

Year of construction: 2015, condition: excellent (used), Dip-Tech GlassJet AR6000, Digital Printer for Glass, year 2015 Print resolution: 360 dpi (real) DIP SPECTRUM INK: Ceramic ink for both tempered and fired annealed glass Ink colors: Black, white, etch imitation, and various spot colors There are currently 7 print heads in operation: 4 black and 3 white. Dusdpfx Afjrhkp Ej Don They enable the printing of black and white. Maximum glass size: 3300 x 6000 mm Minimum glass size: 400 x 400 mm Glass thickness: 2 – 19 mm Operators: 1 Inline functions: Continuous conveyor Overall dimensions: 6071 x 7746 x 1600 mm (width x length x height) Image format: All common graphic formats including: PDF, PS, EPS, Tiff, BMP and JPEG Ambient temperature: 18 – 25 C Installed power: 400 VAC x 16A, 3 Ph. 50/60Hz In very good condition. Dismantled in February 2024. Available: NOW

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Duedpfx Aexf Hm Sof Don Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. In good working condition. Inspection is possible by appointment. Available: NOW

Condition: good (used), Year of construction: 1996, functionality: fully functional, Bavelloni CR 1111 Glass Edging Machine – vertical, 11 wheels Year: 1996 Dsdpfx Aov Nag Rjf Doun Speed: 0,5 – 5 m/min. Glass thickness: 3 – 30 mm 400 V, 3~, 50 Hz, 24 kW, 63 A Dimensions: 8100 x 1200 x 2300 mm. Weight: 4000 kg Inspection is possible by appointment. In good working condition. Available: NOW.

Condition: good (used), Year of construction: 2001, functionality: fully functional, type of input current: three-phase, Glass tempering furnace TAMGLASS, HTF-2136-ABT-10-R 3,8 – 19 mm, 2100 x 3600 mm, Right-Left Year: 2001. Without convection Dedpfxsvkhl Do Af Dsun Noise reduction cabin included 400 V, 50 Hz, total power: 800 kW (heating 470 kW, motors 330 kW) In good technical condition. Inspection is possible by appointment.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, TAMGLASS / GLASTON HTF ProE – 2448-ADS-R 2400 x 4800 mm, 3 – 19 mm, Right – Left Glass tempering furnace (for Low-E glass) Year: 2006 Noise reduction cabin included 160 kW compressor for 3 mm glass included In good condition. Djdpfxsxtf Dfe Af Djun

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, Glass tempering furnace EFCO, 1500x3000 1500 x 3000 mm, Right – Left Djdpfxsxguqns Af Doun Year: 1997. 415 V, 50 Hz, 3 Ph. In good technical condition. Disassembled and ready for loading.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: documentation/manual, RESERVED HEGLA, ProLam 46 LTR-TD Combined Cutting Line for Laminated (VSG) and Float Glass Year: 2014 In very good technical condition. Inspection is possible by appointment. Dusdpfx Afsv I Ed Es Dsn Available: NOW