Used other glass & ceramics processing machinery for sale (278)

Year of construction: 2004, condition: good (used), Load capacity: 3000 kg Tjdpsz Hzcuofx Aa Tsc Dimensions: Height: 3300 mm Width: 2900 mm Depth: 230 mm Weight: 300 kg Condition: good, second-hand

Condition: good (used), Frame transport carts are height-adjustable: 2150 to 2850 mm. Applications: Insulated glass spacers, frames, etc. Frames are secured using clamps or slotted holes. Dimensions: Height: 2150 to 2850 mm Width: 680 mm Depth: 450 mm Todpfx Aez Hzhkoa Tsc Weight: approx. 12 kg Condition: good, second-hand

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: Tjdpfezu Nvzox Aa Tjc In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: like new (used), Year of construction: 2020, operating hours: 574 h, functionality: fully functional, consisting of: additional vacuum tank for workpiece clamping, complete with vacuum distributor and control logic for automatic cycle KW6.6 / 9 HP (S6) electrospindle teleservice system cable remote control for easier positioning and adjustment Robot: automatic loading and unloading system for glass sheets Loading and unloading trolley with lockable wheels Mechanical/electronic device on the robot head for centering the workpiece on the working surface Pneumatically retractable workpiece stop Various double vacuum suction cups Various tool sets incl. reverse osmosis system type IDROTECNICA "IDRO RO 130 ST" max. 130 l/h VERTICAL 500 plastic storage tank 500 l Stand for storage tank SE15002 conductivity test kit incl. FILTRAGLASS ECO-BOX CNC grinding coolant water treatment unit incl. stainless steel chamber tank approx. 3,000 l, 3,000 x 1,000 x 1,000 mm, 3 chambers, circulation pump, agitators, filter system approx. 800 x 600 x 1,780 mm, electrical connection 230 V / 1.5 kW, compressed air connection on-site 7-8 bar (480 Nl/min) Dismantling/removal to be carried out by the buyer Tsdpsw H R A Njfx Aa Tsc

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor Todpezu R Ulofx Aa Tsc - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: good (used), Year of construction: 2004, Laboratory roller kiln for firing ceramics and porcelain stoneware. Kiln from the Spanish company TAI - TECNOLOGIAS APLICADAS A LA INDUSTRIA. Kiln length: 10 meters. Tedpfjxu Nz Djx Aa Toc

Condition: like new (used), Year of construction: 2020, functionality: fully functional, power: 2 kW (2.72 HP), input frequency: 60 Hz, input voltage: 575 V, overall weight: 750 kg, Brand new twin-shaft batch mixer from BHS-Sonthofen for the intensive and homogeneous mixing of various bulk materials. Technical data: Type: DKXC 180 Year of manufacture: 2020 Nominal capacity: 180 liters / 0.18 m³ Drive: 2 × 5.5 kW Voltage: 575 V / 60 Hz Weight: approx. 750 kg pneumatically operated discharge flap Location: Canada The electrical control system was manufactured according to Canadian regulations and must be inspected for operation in Europe and, if necessary, modified to comply with European regulations. The mixer has never been used. Technical specifications are subject to change without notice and are offered for sale subject to prior sale. Tsdjzumpxopfx Aa Tsc

Condition: excellent (used), functionality: fully functional, Glass transport rack A type Loading height: 1800 mm Loading width (glass thickness): 400 mm each side Total rack dimensions: 1150 x 1150 mm Approx. 65 pcs. available Very good and clean condition As is Tedpfxsznufue Aa Tsc Available immediately

Year of construction: 2015, condition: excellent (used), vertical automatic flat glass sand blasting machine with 4 air guns working height : 2000 mm OPEN TOP including air compressor and dryer . voltage : 230/400 V 50 Hz Tedoz Dt T Tepfx Aa Toc

Condition: excellent (used), Year of construction: 2017, Operating direction: right-left Machine is open at the top 4 brushes Washing height: 1600 mm Working height: 850 mm Depth: 1500 mm Height: 2530 mm Todpfx Aezcmdaoa Tsc Overall width: 6220 mm Weight: approx. 800 kg Condition: very good, second-hand

Year of construction: 2019, condition: excellent (used), functionality: fully functional, DESCRIPTION: The KCK-1000-FCP-UC30 pressure chamber is a versatile device with a wide range of applications. It enables the following types of work: - Cleaning the surfaces of metal objects, - Removing: welding residues, scale, rust, oxides, surface deposits, and old paint coatings, - Deburring the edges of objects, - Achieving the desired surface roughness. Technical data: - Width: 1470 mm Tjdpfx Aaezvdfaj Tec - Depth: 1600 mm - Height: 2140 mm - Working chamber: 950 × 880 × 880 mm - Abrasive circulation: pressure-fed - Hand openings: 2 - Nozzle: boron carbide, ø 6 mm - Weight: approx. 300 kg - Lighting: fluorescent - Abrasive tank: 30 l - Air consumption: according to the manufacturer's table

Year of construction: 2012, condition: good (used), Unit comes complete with suction lift Maximum load capacity: 150 kg Tjdszmyrdjpfx Aa Tjc Width: 650 mm Height: 2000 mm Depth: 1100 mm Weight: approx. 25 kg Condition: good, second-hand

Condition: good (used), Year of construction: 2017, functionality: fully functional, Lovati BEM 31 numerical control CNC machine for processing flat glass Year of production 2017 Power 40 KW max. size of glass 3200 x 1650 Todstz T Saopfx Aa Tec equiped with tilting loading table Machine is in a good condition working in the factory. Possibility to see it at work.

Condition: excellent (used), functionality: fully functional, Harp racks for glass transportation 60 loading slots Maximum loading height: 1300 mm Maximum loading capacity: 1500 kg More technical information can be found attached as Tech. data file 4 units in stock In very good and clean condition Tsdpfxozty Rmj Aa Tec As is Available immediately

Condition: ready for operation (used), functionality: fully functional, Glass rack, type A: loading capacity 2500 kg, own weight 220 kg. For glass dimensions: 2460x1050x2200 mm (external height, including hook for crane loading: H2600). Approximately 60 units available. Tsdpez Abbfefx Aa Tec

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Fuel: natural gas Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gas operating pressure: 8 kPa Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C Tedsycvxmjpfx Aa Tec TNV temperature: 930 °C Usable volume: 4.3 m³ If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2015, condition: excellent (used), Microglass FLY 600 Glass Lamination Furnace – a professional machine for the production of laminated glass. For sale is a professional Microglass FLY 600 lamination furnace designed for the production of laminated glass using the vacuum method. The machine is ideally suited for glassworks producing safety glass (VSG), decorative glass, glass with EVA film, and for drying coatings. The unit is equipped with a modern heating system based on infrared (IR) emitters and forced hot air circulation, which ensures uniform temperature and high lamination quality. (mitindustrial.it) Technical specifications: ● Model: FLY 600 ● Manufacturer: Microglass / MIT ● Application: glass lamination, drying of paints/coatings ● Working area: ● 1 platform 1800 × 3200 mm ● Working chamber height: 600 mm ● Number of working drawers: 1 ● External machine dimensions (closed): ● approx. 2450 × 4230 × 1350 mm ● Length with open drawers: approx. 8500 mm ● Machine weight: approx. 3100 kg ● Installed power: 45 kW ● Power supply: 400 V, 3 phases, 50 Hz ● Average energy consumption per standard cycle: approx. 27 kWh ● Lamination temperature: 130°C ● Drying temperature: 150°C ● Vacuum pump: ● two-stage ● power approx. 1.5 kW ● Control: ● touch panel ● digital vacuum gauge ● Programs: ● up to 256 programmable recipes ● possibility to set time cycles ● Heating system: ● tubular IR emitters ● hot air circulation ● Forced cooling: YES ● High-strength silicone membrane ● PTFE mesh to improve vacuum parameters ● Possibility to use an additional drawer to increase productivity (mitindustrial.it) Machine advantages: ✔ large production format ✔ high lamination quality without air bubbles ✔ economical operation for serial and single production ✔ intuitive operation via touch screen Tjdpfx Aszga H Ija Toc ✔ solid industrial construction ✔ ideal for VSG, decorative glass, and custom projects The machine is ready for operation. An excellent solution for professional glassworks looking for an efficient lamination furnace.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Harp racks for glass transportation 60 loading slots Maximum loading height: 1300 mm Maximum loading capacity: 1500 kg 5 pcs. in stock New, never used ! Available immediately Tsdoznlrfspfx Aa Toc

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 1102, I will sell a TENON spacer frame bender. It has a Polish menu, the bender is in very good condition, in constant use. It has a Polish menu. Tedpfx Ajwp Szlsa Tsc

Condition: excellent (used), Year of construction: 2015, 📌 Glass Processing Center – DENVER Krea / Krea Fit (CNC) General Description: A professional 3-axis CNC glass processing center by DENVER – model Krea (also commonly known as Krea Fit), designed for comprehensive processing of flat glass. The machine combines functions such as grinding, milling, drilling, edge shaping, and polishing, making it an ideal solution for glassworks, window manufacturers, producers of decorative elements, and appliance (white goods) manufacturers. ⸻ 🛠️ Technical Features and Functions 🔹 CNC Construction: 3 interpolated axes ensure precise tool guidance and high processing quality. 🔹 Spindle: powerful electrospindle with a power rating of approx. 6.6–9 kW (S6), optimized for glass working. 🔹 Automatic Tool Changer: 14-position tool magazine (standard), which speeds up operations and increases work flexibility. 🔹 CAD-CAM & CNC Control: an intuitive CNC control system with CAD-CAM support simplifies programming and 2D/3D model processing. 🔹 Automation: can be equipped with an integrated automatic loading and unloading system, handling trolley, and robot for glass sheet handling. Tjdpfx Asy Edlboa Tsc 🔹 Vacuum Kit: additional vacuum tank and distributor for stable glass clamping during processing. 🔹 Helpful Accessories Included:  • various vacuum suction cups,  • tool sets,  • reverse osmosis system (e.g. IDROTECNICA IDRO RO 130 ST),  • tanks and auxiliary equipment. ⸻ Kdsboyk Dx Dsludqncok 📏 Working Range ✅ Supported Materials: flat glass of various thicknesses (typically from a few mm up to approx. 25 mm – depending on tool configuration and program). ✅ Possible Operations:  • edge grinding,  • drilling and milling holes,  • beveling and rounding edges,  • engraving and cutting shapes

Condition: excellent (used), Year of construction: 2002, Complete system with support/transport table with edge delamination and storage rack for laminated safety glass. Automatic glass stop and glass-rotating device. Tsdjxap Axjpfx Aa Tsc

Year of construction: 2007, condition: excellent (used), Horizontal glass washing machine TRIULZI SY 2600 6.3.6 Year of production: 2007 Maximum working width: 2600 mm Minimum glass size: 180 x 250 mm Glass thickness: 2 - 35 mm Working speed: 2 - 8 m/min (by inverter) Washing machine consists of: - inlet conveyor approx. 1000 mm long, - pre-washing, - 3 pairs of brushes (6 pcs.), - 3 pairs of air drying knifes (6 pcs.), - 3 water tanks (two with heating), - outlet conveyor approx. 1400 mm long. Total length approx.: 6900 mm Todpfjx Ecwmex Aa Toc Very good and clean condition As is Available immediately

Year of construction: 2011, condition: like new (used), functionality: fully functional, FGL Glass Storage System + Lightweight Platform Model: FGL-V-5000-CKE-190/BL4 Year: 2011 Load Capacity – per compartment: max. 2,200 kg per compartment Frame: 600 kg/m² Total weight: 6,850 kg / 145 kg per compartment Positions: 8 x 5 = 40 positions Model: Lightweight platform for FGL-V-5000-CKE-190/BL4 Year: 2011 Tsdezxc Hbopfx Aa Tec Load capacity of lightweight platform: 600 kg/m² Total load capacity of lightweight platform: 25 tons Weight of lightweight platform: 1182 kg Dimensions: L = 9660 mm / W = 4220 mm / H = 2980 mm

Condition: excellent (used), Year of construction: 2013, UV digital printer. Max. glass size: 2100 x 3100 mm. Prints on rigid materials such as glass, plexiglass, PVC, wood, etc. System with 6 print heads. Tsdpozvpzgefx Aa Tec Condition: very good, second-hand

Year of construction: 2010, operating hours: 5 h, condition: used, functionality: fully functional, machine/vehicle number: 123456789, We are offering this used Wood's Powr-Grip MRT vacuum lifter, year of manufacture 2010. Manufacturer: Wood's Powr-Grip Model: MRT Year of manufacture: 2010 Condition: used Category ID: 681 Type: Woods Powr Grip vacuum lifter Original price: €7,800 If you have any questions or need more information, feel free to send us a message or give us a call. Tsdpfx Aoycwniea Tsc