Used Homag Double End Tenoner for sale (466)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Equipment: documentation/manual, HOMAG FPL 626/03/40/W/3K Double-sided HOMAG format processing machine for solid wood flooring in cross-feed through-feed operation. Fixed reference side left, movable side right . Technical data: Feed speed, infinitely adjustable: 10–40 m/min Format overhang: 3 mm (note profile depth) Format thickness: 10–23 mm Format length in front of lugs: max. 140–250 mm Infeed length min: 2,400 mm Infeed length max: 4,000 mm Working height to top of chain: 950 mm Pneumatic connection: 7–8 bar Standard Milling Unit SF20, 6.6 kW – Format Section - F.01 (1323) - 1 × left, 1 × right For grooving and rebating from the top/bottom as well as from the side, in counter-rotation. • 1 milling motor, 6.6 kW, 100 Hz, 6,000 rpm • Motor shaft Ø35 × 70 mm with keyway • Swivel range: 90°, manual • Cross-slide with electro-pneumatic control for plunge milling • Directional switch for rotation direction • Extraction hood • Groove position: minimum distance 10 mm from chain track or top pressure • Maximum tool diameter: 200 mm • Without tools • Electronic frequency inverter with motor braking function • Manual horizontal and vertical adjustment via spindle and counter Free Space for additional milling unit - 715 mm – Standard Milling Unit - F.04 (1318) - 1 × left, 1 × right • Including extension of sound enclosure and extraction connection ports • Without electrical pre-installation FOR MORE TECHNICAL SPECIFICATION PLEASE READ ATTAGED DOCUMENTS in PDF format. Godpfxsx Spxgo Afajtu This machine stands in south Norway on it orginal place. The company is now closed but it is possible to inspect the machine. Rekman Maskin & Service since 1986

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Numerical Control ( CNC) NC 21, Software Homatic Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Min. useful working width (mm) Max. useful working width (mm) 3000 Max. useful working tickness (mm) 100 (ca.) Gtodpfx Afeh Nx U Noaju Max. depth of the panel (mm) for automatic infeed 1250 Distance between center-axes of the disappearing dogs (mm) 1000 Adjustable (min/max) feeding speed (m/min) 8 - 25 (ca.) No. 4 Working groups (for each machine's side): 1 Jumping Scoring Unit (1 x Kw 1,5 ca.) 1 Hogging Unit (1 x Kw 4,5 ca.) 1 Jumping Milling Unit (1 x Kw 4,5 ca.) 1 Free Space

Condition: good (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Numerical Control Power Control 22, Software WoodCommander (Windows) Safety and sound-proof enclosure No. 2+2 Vertical columns to support the working units Min. useful working width (mm) 155 Max. useful working width (mm) 2500 Min. useful working tickness (mm) 12 Max. useful working tickness (mm) 60 Max. depth of the panel for automatic infeed (mm) 1200 Distance between center-axes of the disappearing dogs (mm) 500 Gedpfx Afsdh Tfkjaotu Adjustable (min/max) feeding speed (m/min) 10 - 30 No. 4 Working groups (for each machine's side): 1 Vertical milling Unit (Anti-chipping) 1 x Kw 4,5 2 Hogging Units (KD 11) 2 x Kw 6,6 1 Fine trimming unit (0°-25°) 2 x Kw 0,4

Condition: excellent (used), Year of construction: 1998, Double end tenoner Homag 4+4 motors Opening side 2500 mm Feeding speed 4-24 m/min. Gtjdpjrcbccefx Afaju Perfect for panels, windows, furniture

Condition: ready for operation (used), Technical characteristics FL20/16/30/II/S 400V 3Ph+n 200A Width 300mm 2x1 straightening unit 2x1 double shredder (bottom up) 3,5kW 2x1 standard milling unit 6kW 2x1 universal milling unit 4,5kW 2x1 universal milling unit 3,5kW 2x1 universal milling unit 1kW 2x1 universal milling unit 0,75kW 2x1 sanding unit 2x1 sanding unit 2x3 KURTZ hot transfer units Mechanization of infeed and outfeed Sorting and quality control Search by typeDouble Power and Motors Gsdpfjty Rxiex Afastu Pluging: Three-phased Overall dimensions

Condition: excellent (used), Double-side Sizing & Edge Banding - Independent Machine (1st &/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 12 Panels thickness (min/max) mm 8 - 100 Working width (min/max) mm 240 - 3000 Numerical Control Power Control PC22 (Windows XP) Software woodCommander Adjustable feeding speed (m/min) 10 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Gtjdpfxett Iuds Afaou Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) E34 Pressing rollers (revolver) both for straight and shaped edges (softforming) GL sextuple Edge coils supporting unit (No. of reels) 1 Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) 25 m/min (0°-30°) Fine Trimming Unit (2 x 0,55 KW) 0°-30° Corner-rounding unit FF12 (4 motors) WD70 20 m/min Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 35 m/min, controller model: Power Control Steuerung PC22 mit SPS Steuerung, workpiece weight (max.): 50 kg, working height: 950 mm, Auction of an edge banding line! The line consists of the following machines: - BARGSTEDT O TSH200/D/30/12 - HOMAG OPTIMAT KFL 525/M1/C - HOMAG OPTIMAT TDL 510/C turntable - HOMAG OPTIMAT KFL 526/M2/C - HOMAG OPTIMAT TDL 510/C turntable - Wandres cleaning brush - BARGSTEDT O TSH200/D/30/12 HOMAG OPTIMAT KFL 525/M1/C TECHNICAL DETAILS Feed speed: 15–35 m/min Edgebanding capacity: Min. thickness: 0.6 mm Max. thickness: 3 mm Max. width: 30 mm Workpiece dimensions: Thickness: 12–40 mm Min. size: 250 × 240 mm Max. size: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT KFL 526/M2/C Max. feed rate for panel processing: 30 m/min Max. feed rate for edge processing: 25 m/min Workpiece dimensions: Thickness: 12–40 mm (L/W) min.: 250 × 240 mm (L/W) max.: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT TDL 310/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TDL 510/C TECHNICAL DETAILS Feed: Steplessly adjustable Gtsdpfxjyghwco Afasu Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TBH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm HOMAG OPTIMAT TSH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm Note: More detailed information regarding the configuration of individual components can be found in the attached order confirmations.

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 0-201-22-3325, functionality: fully functional, workpiece length (max.): 5,800 mm, workpiece width (max.): 1,200 mm, controller model: Homatic-CNC System PC83 mit Windows NT 4.0, feed rate X-axis: 80 m/min, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on 20/03/2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: - Saw and crosscutting unit for tool changer - Drilling and milling unit (4 spindles) for tool changer - Combination flush-trimming and finishing unit for tool changer - Blow-off nozzle for workpiece edge, compatible with tool changer Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy - Max. workpiece length (single occupancy): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1) - Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm - Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2) Support equipment - Drilling head: 17 vertical spindles - 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer) - Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections - Electronic supply and swivel drive - C-axis: swivel range without limitation Edge banding unit, 360°, for insertion into right main spindle - Max. edge height: 65 mm - Pickup station right, for depositing edge banding modules - Pre-cutting station and 3-position roller magazine Adapter units Gsdpoyic Tujfx Afaotu - Combination flush-/radius trimming and finishing unit (profile scraper knife) - Saw and crosscutting unit - 4-spindle drilling/milling unit (crosshead) - Blow-off nozzle for workpiece edge MACHINE DETAILS - Control: HOMATIC control PC 83 with Windows interface (NT 4.0) EQUIPMENT - WOODWOP programming system, version 5.0 - Network connection - Laser positioning aid - Chip conveyor - Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Condition: used, machine/vehicle number: 008294, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 210 + ZHR 01 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 210 + ZHR 01 Gtedpox A Tf Nefx Afaou

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Max feed speed: 40 m/min Gedpfxox A Hfvo Afajtu

Condition: used, machine/vehicle number: 008321, X axis working area: 4200 mm Y axis working area: 1350 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Gsdpfxex A Tdle Afastu Maximum edge height: 60 mm Total number of drilling spindles: 18 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 007328, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Gtedpfjxmgybox Afaju Total number of tool changer positions: 10

Condition: used, machine/vehicle number: 007329, X axis working area: 3200 mm Gtsdpexn Nfvofx Afaou Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: used, machine/vehicle number: 008339, Max. panel width: 3800 mm Max. panel length: 1600 mm Gtsdpfxjx Nm S Sj Afaou Main saw blade projection: 95 mm No of Grippers: 6

Condition: good (used), Power supply, control board, input board, control unit, edgebander, edgebander Manufacturer: Homag Homematic -Type: 2Type: 2083027006 -Number: 5 tax cards available Gedpjcczk Njfx Afastu -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.34 kg

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit Gtjdpfx Afjx Ei Sysaeu - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, Single-sided edge bander designed for precise and stable edging of solid wood and panel components (chipboard, MDF, laminate). The machine is conceived as a compact yet fully equipped solution for small- and medium-batch production, with an emphasis on edge processing quality. A robust cast iron frame ensures high rigidity and long-term geometric stability of the machine. It features a classic continuous conveyor with a pressure belt and a complete set of machining units for finishing the edge in a single pass. Technical configuration of the machine: - Pre-milling unit - Material pre-heating - Automatic EVA glue application - EVA glue roller - Front and rear end trimming saws - Rough trimming unit - Corner rounding unit - Radius scraper - Glue scraper Gtsdpfx Afjyfw Syeaou - Grooving unit - Brushing unit - Return conveyor

Condition: used, machine/vehicle number: 007985, Type of edging: Thin edge, Thick edge, Solid wood Gjdpfx Asx A Th Defajtu Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Operating Units: 7 nr

Condition: used, machine/vehicle number: 007987, Position 1: Single Edgebanders HOMAG-HIGHFLEX 1650 Gtodpsx A Thqofx Afaeu Position 2: Panel Return Systems HOMAG-HIGHFLEX 1650

Condition: used, machine/vehicle number: 008395, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Gtedpfx Aoygtcqefaju Number of controlled axes: 3 axes Total number of drilling spindles: 27 Total number of tool changer positions: 8

Condition: ready for operation (used), Year of construction: 2009, Edgebander manufactured in 2009. This HOMAG PROFI KAR310/11/A20/S2 features a work piece return system BARBARIC. Consider the opportunity to buy this HOMAG PROFI KAR310/11/A20/S2 edgebander. Contact us for further details. • Condition: Used Additional equipment Gjdjyhqi Depfx Afastu • BARBARIC workpiece return system

Condition: used, functionality: unexamined, machine/vehicle number: 2-055-06-1680, Ferwood Code: RU0010260 - Manufacturer Code: 2-055-06-1680 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Gtsdpfxov Izyvj Afaou

Condition: used, machine/vehicle number: 007134, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Gtedpfot Hmtzsx Afasu Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: used, machine/vehicle number: 006574, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Gtjdpfxjvxxuxe Afaeu Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05 Gjdjwuuc Ajpfx Afaetu