All-electric Servo Bending Machine

All-electric Servo Bending Machine 4015E

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 49,641 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: Bystronic, bending force (max.): 40 t, working width: 60 mm, stroke length: 200 mm, oil tank capacity: 100 l, travel distance X-axis: 300 mm, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 955 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Model: Xpert 40/1030 Tonnage 400 kn Bending length 1030 mm Standard stroke [S] 200 mm Open height [D] 515mm Distance between side frames 1060mm Table Width 60mm Max. back gauge range X-axis 500mm X-axis travel 300 mm X-axis speed 1500 mm/s R-axis travel 100 mm R-axis speed 500 mm/s Z-axis travel 955 mm Z-axis speed 2000 mm/s Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm Gjdoxtf A Ispfx Ag Sebg 1.1 Xpert 40/1030 1.2 ByVision Bending control with 22 Inch Full HD display and touch technology 1.3 Dynamic drive system (DDS) with Energy Saver 1.4 Automatic tool protection 1.5 Ergo foot switch 1.6 Rear protection sliding door electrically controlled 1.7 User manual (on CD) 1.8 Ambient air temperature 7°C up to 35°C 1.9 Voltage: 400/480 V, 50/60 cycles, 3 Ph (other parameters available on request)

Condition: good (used), functionality: fully functional, Year of construction: 2008, Electromechanical Press Brake Make: TRUMPF Model: TruBend 7018 Year: 2008 Technical Specifications Manufacturer: TRUMPF Model: TruBend 7018 Year of manufacture: 2008 Press force: 18 t Stroke: max. 150 mm Bending length: 510 mm Distance between uprights: 422 mm Connected load: 5 kVA Required space: L 1295 x W 1320 x H 2380 mm Weight: approx. 1,800 kg Standard Equipment - Robust machine frame - Press beam - High-dynamic, electronic direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Special Equipment - Tool clamping system (Wila) top and bottom - TRUMPF TASC 6000 integrated control system - Safety light curtain (front) - Backgauge system: 6 axes, X1, X2, R1, R2, Z1, Z2 - Comfort support table - BendGuard (with block laser) Safety Features - Side-mounted swing doors - Two-pedal foot switch for both stand-alone and seated operation - CE marking Gbsdpfx Agox Ebtye Sog All information subject to change. A powered demonstration can be arranged at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2014, Main Drive Number of axis 6 Bending length 1020 mm Pressing force 3200 Kn Additional Equipment Backgauge system with 5 axes and control cabinet climate control Upper tool clamping: hydraulic and hardened Gbedpjx D D Hyefx Ag Seg Lower tool clamping: hydraulic CNC Crowning BendGuard safety device Foot switch 2x support consoles, front 1x bending aid with 900 mm parking position Table extension for base table / additional table This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4" color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. Application Types Bending

Condition: as good as new (ex-display), Year of construction: 2023, The environmentally friendly CNC servo press brakes from WEINBRENNER, model series WPS, represent a maximum improvement on the previous hydraulic standard machines. Up to 60 % energy savings and higher angular accuracy. The tool holder corresponds to the AMADA system, as do the tools. The stability of the press is optimized by the closed frame construction To compensate for deflection, the press is equipped with a motorized, CNC-controlled table crowning system (System WILA). Technical data: Maximum press capacity: 50 tons Bending length: 2040 mm Table width: 60 mm Table width with WILA lower tool: 90 mm Table height from floor: 930 mm Installation height: 590 mm Max. Press stroke: 300 mm Lowering speed: 150 mm/sec. Pressing speed: 10 mm/sec. Retraction speed: 150 mm/sec. Max. utilization range backgauge (X axis): 750 mm Max. utilization range backgauge (R axis): 160 mm Adjustment speed of the backgauge in the X-axis, servomotor: 330 mm/sec. Positioning accuracy of the backgauge: +/- 0.03 mm Motor power: 2x 5.5 kW Equipment / standard accessories: - CNC control " ESA S875-2D". This enables easy graphic programming of products. After one the control unit calculates the bending sequence and all axis positions (including collision warning), 15" TFT color display touch screen, USB interface, network connection, tool directory for 50 punches and dies each. Graphic 2D programming, 2D display while working, maximum 4 axes + auxiliary functions. - Arm adjustable in height and sideways in 2 axes for ergonomic and convenient operation of the CNC control. - Split upper tool, "Amada" system, manufacturer Italy, material C 50 (HRC 50-52) induction-hardened and ground on the working surfaces. ground on the working surfaces. Load capacity: 100 to per meter. Standard delivery: Pitch: 2 x 835 mm, horn left and right each Gjdjth U Edspfx Ag Sobg 100 mm each, rest in smaller pitch. Height 66.6 mm - Bottom tool / 4-fold prism cube CroMo 4, ground 60x60 mm, V-openings standard: 16 - 22 - 35 - 50 mm - 2-axis backgauge "X - R", AC servomotors, travel: X=0 mm, R=160 mm, positioning accuracy + / - 0.03 mm, Travel speed: 330 mm / sec. Including 3 laterally adjustable stop fingers - Laser protection "FIESSLER" with 2-fold beam, type AKAS / LCII, operation of the press only possible with foot pedal. - Automatic motorized table crowning system WILA, integrated in the CNC - front sheet supports (2 pieces) can be moved laterally via linear guide, height adjustment with handwheel. Equipped with wide brush supports - German operating instructions with spare parts list - CE conformity

Condition: ready for operation (used), Year of construction: 2023, General Data Machine weight 1800 kg Measurements height 2200 mm Dimensions Machine Length 1440 mm Main Drive Number of axis 3 Gbedpfx Aex I S Rwsg Sjg Pressing force 220 Kn This 3-axis Coastone Cone C9 press brake was manufactured in 2023. It features a C-frame design, a pressing force of 220 kN, and a maximum bending length of 900 mm. Equipped with an Omron Touchscreen TC15-2D CNC control and Amada Promecam tool clamping system, it ensures precision and ease of use. Located in Slovenia, it comes with a complete bending tool set and a 36-month warranty. Consider the opportunity to buy this Coastone Cone C9 press brake. Contact us for more information. Application Types Bending

Condition: ready for operation (used), Year of construction: 2016, General Data Machine weight 4000 kg Main Drive Pressing force 400 kN Stroke 200 mm This Bystronic Xpert 40/1030 was manufactured in 2016. A robust press brake with a working length of 1030 mm and pressing force of 400 kN. It features a max stroke of 200 mm and is powered by a main motor of 7.5 kW. Ideal for precise bending operations. Contact us for more information. Application Types Gbsdex D H Dnepfx Ag Ssg Bending