Used Sup Elefant S15 for sale (24,360)

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Iijdjwz Nzmjpfx Af Ssk Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: used, Year of construction: 2022, fuel type: diesel, Drivetrain Make of engine: Kubota Weights Empty weight: 2.006 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.500 cm Other information Emission level: Stage V / Tier V Max. horizontal reach: 690 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 90 Transport dimensions (LxWxH): 4,03x0,77x1,98 Rental currency: EUR Production country: IT Iedpfx Ajx Eg Enof Seik Additional information Please contact Pieter Minner for more information

Condition: used, empty load weight: 16,200 kg, maximum load weight: 48,050 kg, overall weight: 64,250 kg, axle configuration: > 3 axles, first registration: 08/1976, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, total height: 131,000 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, 4 axles, Kässbohrer axles, leaf suspension, forced steering, lashing rings, 2-piece loading ramps, front support. Body: 750 mm ramp width, fifth-wheel height 1550 mm, kingpin 3 ½", 4 x 13t axles, 4 axles hydraulically forced-steered, overall length 13,100 mm. All information is supplied without guarantee as the vehicle is inbound! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, intermediate sale, and errors excepted! Iiodoxyzyiepfx Af Sjk

Condition: good (used), Year of construction: 1995, Compressor with air dryer. Volume flow: 1.45 m³/min Final compression pressure: 10 bar Motor power: 11 kW Tank capacity: 500 litres Width: 1800 mm Depth: 660 mm Height: 1700 mm Weight: approx. 500 kg Ijdpfxexrz Hte Af Soik

Condition: used, Year of construction: 1998, feed pressure 8 bar Ijdpfxsqa Tw No Af Ssik liter capacity 1,65 m³ / min dimensions 1000 x 750 x 950 mm total power requirement 11 kW weight of the machine ca. 175 kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, BOGE S15 screw compressor, machine after service Ijdpfx Aoxbf Tcjf Ssik Technical specifications Capacity: 1.45 m3/min (1450 L/min); motor power: 11 kW; maximum pressure: 10 bar; mileage: 10,900 h; net price: 5,600 PLN gross price: 6,888 PLN Below is a link to a video showing the compressor in operation.

Condition: refurbished (used), Year of construction: 2015, SPITZENBERGER & SPIES Bordnetzsimulation Supply Simulation System PAS 15000/GN/KFZ/OPD The device is from VW. Update: Device overhauled by the manufacturer. As pictured. According to specifications, the following tests can be carried out: Audi BDM LAH XXX.915.181.XX ISO 7637-2 ISO 16750-2 ISO 21848 LV 124 SAE J 1113-11 VW TL 80101 VW TL 82066 VW TL 82366 Among others, the following components are installed: Power Supply NT 15000/GN/Kfz SyCore Iodpewg Rzfefx Af Soik 2-Quadrant Amplifier PAS 15000/GN/Kfz Overvoltage Protection Device OPD 15000/GN/Kfz The instruction manual can gladly be sent by email in advance. Viewing welcome. Also see my other measurement and test equipment offers.

Condition: used, empty load weight: 16,200 kg, maximum load weight: 52,400 kg, overall weight: 68,600 kg, axle configuration: > 3 axles, first registration: 06/1979, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, total height: 131,000 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-piece drive-on ramps, front support, twin tires. Body: 750mm ramp width, fifth wheel height 1550mm, kingpin 3 ½", 4 x 13t axles, 4 axles with hydraulic forced steering, total length 13,100mm. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Ijdswh Uipepfx Af Soik

Condition: excellent (used), Year of construction: 2002, BOGE S15 screw compressor machine after service Technical data Efficiency: 1.45m3/min (1450 L/min); 11 KW engine; Iiodjvvkx Rspfx Af Sjk max pressure: 10 bar; year;2002 mileage: 10932 h;

Condition: used, empty load weight: 18,500 kg, maximum load weight: 59,200 kg, overall weight: 77,700 kg, axle configuration: > 3 axles, first registration: 10/1978, loading space length: 9,650 mm, loading space width: 3,150 mm, loading space height: 1,100 mm, total height: 142,000 mm, suspension: steel, tire size: 8,25 R 15 PR 18, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: in transit, 6 axles, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-part loading ramps, front support, twin tires Iiodpfsxwa Uyjx Af Sjk Body: 600mm ramp width, 1950mm between ramps, 6 axles, 3rd, 4th, 5th, and 6th axles hydraulically forced steered, fifth wheel height 1,550mm loaded, kingpin 3 ½", 6 x 10.55t axles, total length 14,200mm. All information provided without guarantee, as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: ready for operation (used), Mitsubishi Electric MECHA CR750-07VLD1-1-S15 robot controller SN: F1A803065M, used, in good condition, fully functional, scope of delivery as per photos. The following components are also available in our shop: connection cable "Mitsubishi Electric BKO-FA0741H07-D" / robot "Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot" / connection cable "Mitsubishi Electric BKO-FA0739H07-D". Iiodpfx Afex Dw Nne Sek

Condition: ready for operation (used), Year of construction: 2013, Control Unit Brand MITSUBISHI Iiodpfex D H Nkjx Af Ssk Main Drive Number of axis 6 Technical Specification Max. Handling Weight 13 kg This 6-axis Mitsubishi RV-13FLM D1 S15 robot arm was manufactured in 2013, featuring a comprehensive operating range with base rotation of ±240° and wrist roll of ±360°. It's equipped with powerful motors, including 1500 W for both the base and shoulder. If you are looking to get high quality robotic arm capabilities consider the Mitsubishi RV-13FLM D1 S15 machine we have for sale. Contact us for more information. Application Types Robotics

Condition: used, Year of construction: 2022, operating hours: 545 h, mast type: telescopic, Drive: Track Empty weight: 8.420 kg Lifting capacity: 250 kg Working height: 1.500 cm Ijdpfew S Avksx Af Ssik Rental currency: EUR Please contact Pieter Minner for more information

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt Iiodpfx Ajxxpaujf Sok - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: excellent (used), Mitsubishi Industry 6-Axis Articulated Arm Robot Here we offer Mitsubishi industrial 6 axis articulated arm robot. RV-Series Industrial Robots Compact and powerful flexible automation and high reliability. The RV-Series offers a highly dynamic 6-axis jointed-arm robot for maximum quality. Type: RV-3SDB-S15 Number of axes 6 Maximum lifting force 3.5 kg Reach radius 642 mm Weight 38Kg Condition: used / used Scope of delivery: (See picture) Iedsgkg Eujpfx Af Seik (Changes and errors in technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: used, maximum load weight: 33,000 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 01/2008, next inspection (TÜV): 02/2026, loading space volume: 37,300 m³, total width: 2,470 mm, Year of construction: 2008, BURG BPO 13-27 RGZXX 37,300 LITER HOLVRIEKA TANK Body: Burg stainless steel tank, 37,300 liters, Holvrieka First registration: APK: Chassis number: XLK332780034558 Dimensions (LxW): 1163 x 247 cm Curb weight: 7,000 kg Payload: 33,000 kg Gross vehicle weight (GVW): 40,000 kg Suspension: Air suspension Axle configuration: 3 axles Axles: SAF axles with disc brakes Tyre size: 385/65 R22.5 Tyre condition: - Rear axle 1: left outer 50%, right outer 50% - Rear axle 2: left outer 50%, right outer 50% - Rear axle 3: left outer 80%, right outer 80% Features: - ABS - 37,300 L stainless steel tank, exclusively used for oils and greases (all food-grade) - SAF axles with disc brakes - Excellent condition BURG tank trailer - Only used for oils Additional Information: - Curb weight: 7,000 kg - Tyre size | First axle: 385/65 R22.5 - Tyre tread depth, inner left | First axle: 50% - Tyre tread depth, inner right | First axle: 50% - Max axle load | First axle: 9,000 kg - Tyre size | Second axle: 385/65 R22.5 - Tyre size | Third axle: 385/65 R22.5 - Tyre tread depth, inner left | Second axle: 50% - Tyre tread depth, inner left | Third axle: 80% - Tyre tread depth, inner right | Second axle: 50% - Tyre tread depth, inner right | Third axle: 80% - Max axle load | Second axle: 9,000 kg - Max axle load | Third axle: 9,000 kg - Price on request: Yes - Axle position | First axle: Rear - Brake type | First axle: Disc brakes - Suspension | First axle: Air suspension - Alloy wheels | First axle: Yes - Axle position | Second axle: Rear - Axle position | Third axle: Rear - Brake type | Second axle: Disc brakes - Brake type | Third axle: Disc brakes - Suspension | Second axle: Air suspension - Suspension | Third axle: Air suspension - Alloy wheels | Second axle: Yes - Alloy wheels | Third axle: Yes Additional features: - Alcoa wheels - Homepage - Alloy wheels - SemCollection - SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please check the costs and procedures applicable in your country in advance Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Iiedpfx Aoxzm Hdjf Sjk Subject to change, prior sale, and errors.

Condition: ready for operation (used), Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot SN: FK612018R, used, in good condition, fully functional, supplied as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! The following components are also available in our shop: Controller "Mitsubishi Electric MECHA CR750-07VLD1-1-S15" / Connection cable "Mitsubishi Electric BKO-FA0741H07-D" / Connection cable "Mitsubishi Electric BKO-FA0739H07-D" Isdpjx Dw Nusfx Af Ssik

Condition: new, Year of construction: 2024, Handheld laser welder LWH-1000-N Gefasst SUP 20S The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz Iijdehufigjpfx Af Sok - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Gefasst SUP 20S laser head - Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: used, Year of construction: 2021, operating hours: 215 h, mast type: telescopic, Drive: Track Empty weight: 8.420 kg Lifting capacity: 250 kg Iodpew Srbpofx Af Seik Working height: 1.500 cm Rental currency: EUR Please contact Pieter Minner for more information

Condition: excellent (used), Mitsubishi Here we offer a Mitsubishi industrial robot. Payload (kg) 3 degrees of freedom 4 Speed (mm/s) 7200 Iedpfxeiz S Rao Af Ssik Repeatability (mm) 0.01 Cycle time (s) 0.44 max. reach radius (mm) 400 Operating range J1 (degrees) 264 Operating range J2 (degrees) 282 Operating range J4 (degrees) 720 Z-axis stroke (mm) 180 Controller type CR751-D Protection class IP20 Power supply 1 phase (VAC) 200-253 Power consumption (VA) 500 Product dimensions & weight Width (mm) 130 Height (mm) 511.5 Depth (mm) 580 Weight (kg) 14 Type: RH-3FH5515-1D1-S15 + CR751-03HD1-0-S15 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), Mitsubishi Electric CR750-07VD1-1-S15 robot controller SN: F1A606002M, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. The following components are also available in our shop: Connection cable "Mitsubishi Electric BKO-FA0739H05-D" / Robot "Mitsubishi Electric RV-7FM-D1-S15 industrial robot" / Connection cable "BKO-FA0741H05-D". Isdpfex Dw Nbex Af Ssik

Condition: excellent (used), Here we offer Mitsubishi industry 6 axis articulated arm robot. Mitsubishi Industry 6-Axis Articulated Arm Robot 6-axis jointed-arm robot RV-3SDB-S15 The RV-3SDB jointed-arm robot The RV-3SB robot is specially designed for handling loads up to 3.5 kg. suitable. The IP 65 standard encapsulation ensures that the robot can be used an operation under extreme conditions. Special features: Axis softness adjustment for workpiece tolerance compensation Conveyor belt tracking sensorless collision detection encapsulated design adaptive speed optimization Feature/Function degree of freedom (number of axes) 6 Standard version (oil mist) Mounting: floor, wall or ceiling mounting possible (wall mounting with restriction in J1 axis) Construction: vertical articulated arm Drive system: AC servo (all axes with brake) Position detection: Absolute encoder Range of motion: degrees Body (J1) 340 (-170 to+170) Shoulder (J2) 225 (-90 to+135) Elbow (J3) 191 (-20 to+171) Forearm rotation (J4) 320 (-160 to+160) Wrist tilt (J5) 240 (-120 to+120) Wrist rotation (J6) 720 (-360 to+360) Movement speed:degrees/s Body (J1) 250 Shoulder (J2) 187 Elbow (J3) 250 Forearm rotation (J4) 412 Wrist tilt (J5) 412 Wrist rotation (J6) 660 Resulting maximum speed 5500 mm/s Lifting force Nominal value 3kg Maximum value 3.5kg Reach radius (to the pivot point of the J5 axis) 642mm Weight: 37kg Iiedod H E H Uepfx Af Sok Robot controller CR1DA-721-S15 (230V) Teachbox R46TB with color/touch display Technical data: Dimensions (W × H × D) 252 × 240 × 114 mm Weight 1.250 kg Connection type: Connection to robot controller with circular plug,cable length 7 m Interfaces: RS422 For connection to the robot control Display/Screen: Touch-sensitive 6.5" TFT monitor with backlighting and and 640 × 480 pixel resolution, the touch screen can be operated with fingers or stylus. touchscreen. Type: Mitsubishi Melfa RV-3SDB-S15 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), Mitsubishi Electric CR750-20HD1-1-S15 industrial robot, SN: F1A508143M, single phase AC200-230V 50/60 Hz, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Iiedpfx Afsx Dw Nho Ssk

Condition: excellent (used), Mitsubishi Industry 6-Axis Articulated Arm Robot Here we offer Mitsubishi industrial 6 axis articulated arm robot. RV-Series Industrial Robots Iiedpfxegkg Dlj Af Ssk Compact and powerful flexible automation and high reliability. The RV-Series offers a highly dynamic 6-axis jointed-arm robot for maximum quality. Type: RV-3SDB-S15 Number of axes 6 Maximum lifting force 3.5 kg Reach radius 642 mm Weight 38Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: ready for operation (used), Mitsubishi Electric RV-7FM-D1-S15 industrial robot SN: FG606002R – minor damage at the air connection, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire about costs for packaging and shipping separately! The following components are also available in our shop: Controller "Mitsubishi CR750-07VD1-1-S15" / Connection cable "BKO-FA0741H05-D" / Connection cable "BKO-FA0739H05-D". Iisdpfxsx Dw Nzj Af Ssk