Condition: like new (used), Year of construction: 2018, operating hours: 1,139 h, Functionality: fully functional, total length: 4,077 mm, overall weight: 1,000 kg, Edge banding machine Lange B 90 KFE - Single-sided automatic edge banding machine with - 7" color touch screen - Roller table 800 mm Dob Hju D Htqehvphskl - Joining unit, 2 motors equipped with DIA cutter - Hot melt adhesive application to straight workpieces EVA-PUR glue pot Coated with discharge function at the bottom - Quick-change basin - 2 x release agent spraying Ripa - HF cross-cut saw station, - HF trimming unit, - corner copying unit, - chain feed, double roller top pressure, - extendable workpiece support rail, - Signal lamp for workpiece sequence - For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths of 0.4 - 3.0 and 5.0 mm - Workpiece height 8 - 60 mm - Workpiece width min: 75 mm - Feed speed: 8 -10.0 m/min; - Radius scraper - Surface scraper - Finishing unit - buffing - 2 x cleaning agent spraying Ripa - LED lighting inside - Extendable roller support - Total length 4077 mm - Weight approx. 1000 kg

Condition: used, machine/vehicle number: 007721, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 30 m/min Dkjb Hhvpev Ir R Sehjl Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: ready for operation (used), Year of construction: 2023, This SCM Stefani kd hp edgebander was manufactured in 2023. It offers advanced capabilities for precise and efficient edge banding. Ideal for high-quality woodworking, this machine represents a significant asset for enhancing production efficiency. Contact us for more information about this machine. Debov Utn Ee Hhvphokl Application Types Edge Banding

Condition: used, Holher Primus 1436 SE PVC edgebander from 1997. The machine ran perfectly until the end. Then a defect occurred with the cartridge heater. It was removed, repaired, and not reinstalled. Dkob Hhvpewdl Syohjl

Condition: new, Year of construction: 2025, Functionality: fully functional, edge thickness (max.): 3 mm, type of input current: three-phase, compressed air connection: 6 bar, height adjustment type: mechanical, input voltage: 400 V, power: 6.5 kW (8.84 HP), input frequency: 50 Hz, warranty duration: 12 months, frequency: 50 Hz, tank capacity: 3 l, material thickness: 3 mm, plate length: 1,200 mm, DANIBRUM AC CONTUR 2 – Edge Banding Machine for Curved, Round, and Irregular Panels The DANIBRUM AC Contur 2 is the ideal solution for precision edge banding on panels with non-standard shapes — from oval, round, and rectangular parts to undefined curved geometries. Its operational flexibility allows edge application on 90° angles as well as open and closed arcs, thanks to an advanced mechanical feed system and adjustable profiling setup. A key advantage of this machine is its high-precision edge trimming, enabled by a laser sensor that perfectly synchronizes the edge tape ends, ensuring flawless joints with a tolerance of just ±0.3 mm. Operation is intuitive through a touch-screen interface that allows fast adjustment of all working parameters. The system features a vacuum-supported mobile arm, extendable up to 2250 mm, providing reliable and stable support for the workpiece during processing. For safe and efficient use, the machine is equipped with a foot pedal control system, while the adjustable feed speed enables edge banding at 0 to 30 cm/s and longitudinal profiling at 0 to 24 cm/s. Optimized for Complex Workpieces This machine is designed to handle: Edge tape thickness: 0.5 – 3 mm Panel thickness: 12 – 60 mm Minimum working radius: 20 mm Compatible with various panel formats: Round pieces up to Ø2400 mm Rectangular panels: 1200 x 2400 mm L-shaped panels: 1400 x 1600 mm Equipped with high-speed longitudinal profiling cutters (24,000 rpm), it guarantees a high-quality finish even on complex contours. The AC Contur series includes multiple models, such as AC Contur 2 and AC Contur 3, the latter featuring two extendable arms for increased productivity. Technical Specifications Edge tape thickness: 0.5 – 3 mm Minimum working radius: 20 mm Panel thickness: 12 – 60 mm Material dimensions: Round: Ø2400 mm Rectangular: 1200 x 2400 mm L-shape: 1400 x 1600 mm Cutter speed (longitudinal profiling): 24,000 rpm Feed speed: Edge banding: 0 – 30 cm/s Profiling: 0 – 24 cm/s Dob Hhvpowg E Hvshekl Edge tape joint accuracy: ±0.3 mm Compressed air pressure: 0.6 – 0.8 Mpa Working temperature: 110 – 210°C Adhesive tank capacity: 2.6 liters Arm extension length: 2250 mm Installed power: 6.5 kW Power supply: 400 V – 3 Phase – 50 Hz Weight: 430 kg Overall dimensions: 1870 x 1400 x 1530 mm

Condition: like new (used), Year of construction: 2023, operating hours: 13 h, Functionality: fully functional, feed rate X-axis: 10 m/min, total length: 4,300 mm, workpiece height (max.): 50 mm, total width: 1,450 mm, edge thickness (max.): 3 mm, total height: 1,500 mm, overall weight: 920 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, working height: 850 mm, power: 7.4 kW (10.06 HP), input frequency: 50 Hz, operating pressure: 6 bar, I am offering for sale an F5 Next edge bander in very good condition. The machine has always been treated with care and is fully functional. Details: - Model: F5 Next - Condition: Very Good - Reason for sale: Consolidation of some company machines This edge bander is excellently suited for professional applications and is ideal for joiners and cabinetmakers who value quality and efficiency. If you are interested or would like further information, please feel free to contact me. F5 next edge banding machine with PLC control (including touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm: Joining router (including DIA tool) up to 2 mm milling depth1), maintenance-free glue pot with interchangeable pot setup including glue outlet device, HF-cutting saw station (approx. 12,000 rpm), HF-milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable blade cutter (combination version), corner rounding machine, radius scraper, flat scraper (including pneumatic lift), trimming station, robust chain drive, ball-bearing double roller top pressure, viewing window on the Deb Hjwdpn Sehvphekl rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Additional equipment: -Quick-change corner milling machine setup -Additional interchangeable corner milling motor with tooling (only in conjunction with F5/08/4) -Interchangeable EF R radius motor = 1mm -Multi-radius scraper (R1/R2) -Chassis -Release agent spray device -Cleaning agent spray device -Edge spray device -Pneumatic 3-point adjustment (radius, chamfer, flush milling) -Joining up to 50mm workpiece thickness Joining thickness max. 1mm for 40-50mm workpiece thickness The buyer is responsible for organizing and covering the costs of transporting the machine.

Condition: excellent (used), Year of construction: 2020, SCM Stefani MD Industrial automatic Edge bandersolution MD T-ER4S (69) year of production 2020, started in production from 2022 GENERAL DATA Variable track feed speed m/min 10-25 Panel thicknes mm10-60 Dkob Hhowgcfpovphsl Thickness of edges in strips *(with option "kit for solid wood up to 22 mm”) mm 0,3-15 (22)* Thickness of rolled edges mm 0,3-3 Max. section of rolled edges mm² 135 Width of the magazine for edge in strips mm 195 Max. working speed with solid wood > 6 mm m/min 12 Coil-holder plate diameter mm 780 Exceeding material to the panel thickness mm 2+3 Distance between two successive panels - 10 m/min mm 600 Distance between two successive panels - 25 m/min mm 700 Min. panel length ( 100 nn min. width) mm 140 Min. length of edge in rolls mm 170 Min. length of edge in strips mm 250 Opening for panel support roller mm 600 Worktable height mm 950-980 Extra options ordered with machine: Maestro active edge control unit Maestro connect complete hardware Bar code reader AAR Anti-adhesive device Spray mist device for Edge finishing Spray mist device for for delicate edges Spray mist device for Glue cooling Kit for Nesting copying devices Top belt pressure beam Kit for process solid wood up to 22mm thickness Loader for narrow pieces Prearrangement for fastback – panel return device Easy size plus device 4 kw motors power instead of 2,2 for diamonds Dimond tools H 64 for panel edge trimming unit SGP glue pot with NC dosing device instead of standard PU Box L premelter for PU glue in addition to the standard Infrared ceramic lamp Vertical 2 coil magazine with automatic edge changeover Edge detecting sensor Electronic positioning of pressure rolers RSP in-line trimming unit MultiEdge device for RI/S trimming unit Trimming unit radius 1 mm Trimming unit radius 2 mm Trimming unit radius 3 mm 3 edge kit for Round 4M (SCM patent) Multiedge 2R edge scraping unit Edge scraping unit radius 1 mm Edge scraping unit radius 2 mm U spindle grooving unit RCA/2C glue scraping unit Pneumatic oscilation system for brushing unit ID 3000 edge brightening unit

Condition: new, Year of construction: 2025, Space-saving with excellent specifications. Your entry point into edgebanding could not be better, as the 3.3m long F2 is both cost-effective and space-saving. And it also has the specifications you require to process perfect edges right from the word go – diamond-tipped cutters guarantee superbly prepared workpieces for edging. The specifications include pre-milling aggregate (up to 3 mm), the top-side fast-heating glue pot, trim saw and combicutter. The F2 can also be optionally fitted with a surface scraper. Get started into perfect edgebanding! Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Djb Hhjglfw Nevphokl Feed speed: 10 m/min. Ready to operate: approx. 3.5 min. Power consumption: ∅ approx. 5.9 kW Electrical connection: 400 V/3Ph/50Hz Table height: approx. 900 mm Machine dimensions: approx. 3,350 x 1,300 x 1,400 mm (LxWxH) Weight: approx. 620 kg Exhaust connection: ∅ 1x140 mm Surface scraper (incl. pneumatic disengagement)

Condition: ready for operation (used), Year of construction: 2001, IDM SCM Activa R 59 edge banding machine Joining milling unit TT/A S piece 2 kW at 12000 rpm 200 Hz Gluing unit: Edge thickness 0.4 to 22 mm Workpiece height 10- 60 mm Cutting unit IN 600 Motor power 2x 0.5 kW 12000 rpm Dkob Hheufzi Hsvphsl Motor inclination 15° adjustable Milling unit R on top of each other Milling cutter diameter 80 mm 12000 rpm Motor power 2 x 1.8 kW Round SK with 2 motors Material thickness 10- 45 mm Edge thickness 0.4 - 3 mm Radius scraper RCS 99 Surface scraper RCA Buffing unit SPK Hot air dryer to restore the edge color Feed speed 12-18 m/min Space requirement length 6590 x 1400 mm x 1800 mm Weight 4000 kg Year of manufacture 2001 Price 10,000.-

Condition: good (used), The HOMAG KL 78 is a high-performance single-sided edgebander designed to meet the needs of industrial production. With advanced technology and versatile configuration, this machine is ideal for quickly and precisely processing panel edges with excellent quality. Main Features: - Homatic Numerical Control for intuitive and precise operation management. - Grinding Units to ensure perfect surfaces. - Gluing Unit with Pre-Glueing for uniform adhesive application with minimal waste. Dksb Hsuh Acaohvphel - Edge Pressure Unit for a stable and durable finish. - Double End Trimmer for fast and precise edge finishing. - Overlapping Double Refiner for smooth and flawless edges on both sides of the panel. - Multi-function Rounder for complete and detailed edge processing. - 0°/90° Milling Group for highly precise and finished edges. - Edge Scraper and Glue Scraper for a flawless cleaning and perfect finish. - Brushes for thorough cleaning and surface finishing. - Available Space for Additional Units for further customization. - Spare Tool Groups for easy and continuous maintenance. With the HOMAG KL 78, every edging operation is made simple and fast, boosting production efficiency without compromising on quality.

Condition: excellent (used), Year of construction: 2020, Edge thickness 0.4 – 12 mm Roll separation max. 3 x 45 mm or 0.8 x 65 mm Workpiece thickness 8 – 60 mm Feed rate variable 8 – 16 m/min. (*) When selecting the form milling machine, the automatic switchover to 11 m/min occurs. Electrics 400 V – 3 Ph. – 50 Hz Pneumatic connection min. 6 bar Connection value approx. 15.5 kW Total length 6,360 mm GUIDE RAILS for moving the entire machine sideways by 500 mm (3 guide rails firmly anchored to the floor, working height of the machine 1,050 mm) OVERVIEW OF THE UNIT EQUIPMENT: Electronic control POWER CONTROL PC 20+ HOLDER ROLLER PLATE CRANKED INLET RULER ADJUSTABLE INLET RULER EXTENSION BY 300 MM SURCHARGE FOR PROGRAM ADJUSTMENT OF INLET RULER MOTORED HEIGHT ADJUSTMENT OF TOP PRESSURE SURCHARGE FOR PROGRAM ADJUSTMENT OF PRESSURE ZONE RELEASE AGENT INFORMATION WORKPIECE AUTOMATIC EDGE FEED QUICKMELT – GLUING PART GLUE CONTAINER STANDARD, REPLACEABLE PU GLUE JOINING MILLING UNIT 2 X 2.2 KW 200 HZ FG 3500 JOINING MILLING CUTTER SET 48 MM DIA (FOR VKNR 4722/4730) AUTOMATION PACKAGE II FOR 2-MILLING MACHINE consisting of: 3175 – PNEUMATIC ADJUSTMENT OF TRIMMING BEVEL/STRAIGHT 5762 – PNEUMATIC ADJUSTMENT OF DRAWING BLADE 4189 – PNEUMATIC ADJUSTMENT OF MILLING UNIT 4199 – PNEUMATIC 2-POINT ADJUSTMENT. VERTICAL. TACTILE Dksb Hhvev Abfzjphel TRIMMING UNIT CHAMFER/STRAIGHT 2 X 0.35 KW HL 6110 PRE-MILLING UNIT 2 X 0.55 KW 0 DEGREES VF 6210 MILLING UNIT 2 X 0.55 KW SYNCHRONOUS BF 6245 ADDITIONAL COST PROGRAM ADJUSTMENT TO EDGE THICKNESS MULTIPLE ROLLER PROBE FLUSH MILLING MOTOR CHANGING DEVICE 2 MILLING MOTORS BF6240/6245 EXCHANGE COMBINATION MILLING SET STRAIGHT/CHAMFER 45 DEGREES FORM MILLING UNIT TOP+BOTTOM 2 X 0.35 KW FF 6220 2 motors each 0.35 kW, 200 Hz, 12000 1/min. DRAWING BLADE WITH QUICK CHANGE HEADS ZK 6510 ADDITIONAL DRAWING BLADE POINTED WORKPIECES SURFACE DRAWING BLADE GLUE JOINT ZF 6600 CLEANING AGENT INFORMATION WORKPIECE BUFFING UNIT 2 MOTORS FP 6810

Condition: like new (used), Year of construction: 2016, operating hours: 650 h, Functionality: fully functional, feed rate X-axis: 11 m/min, workpiece height (max.): 60 mm, compressed air connection: 7 bar, EDGE BANDER BRANDT (HOMAG) HIGHFLEX 1220 FULL OPTION PERFECT CONDITION ONLY 650 H PREFILLER L+R ROTATING 2 GLUE TRAYS (WHITE/TRANSPARENT) VARIOUS SCRAPERS Dob Hhowcma Njvphjkl Dutch manual Immediately available (demo is ready)

Condition: used, Year of construction: 2006, Functionality: unexamined, machine/vehicle number: 0-202-04-0227, feed length X-axis: 2,500 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 40 mm, feed rate X-axis: 2 m/min, edge thickness (max.): 3 mm, input current: 200 A, year of last overhaul: 2022, For sale Homag Kfl526 double-sided edge gluing machine with Pur glue station. Year of manufacture 2006. Gluing edge thickness 0, 4 to 3mm. Gluing part thickness 12-40mm Gluing part min dimensions 250x240mm. Dsb Hhvpjudxb Dshekl Max size of the workpiece 2500x1200mm. Max. lapping speed 20m/min

Condition: new, Year of construction: 2025, Edge thickness 0.4 - 3 mm Thickness of glued boards 10 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Corner milling unit 0.75 kW Transport belt unit 1.5 kW Overall dimensions 4500 x 700 x 1450 mm Transport dimensions 4280 x 650 x 1280 mm Weight 1230 kg Dsbsv Dt T He Hhvphokl Pre-milling milling: diamond milling cutter. Gluing Final cutting Milling: two motors Corner finishing Radial scraper Flat scraper (glue) Spray system Polishing Internal lighting Automatic lubrication Electrical equipment: Delta brand

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, Ott Atlantic V6 edge banding machine capping, 2 x milling, radius scraper, cleaning disks Edge thickness: 0.2 - 6 mm Dob Hhvpjr Elhvjhokl Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Condition very little used year of construction 1999 price 5500.-

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Dsb Hhvogmn H Ajphjkl

Condition: new, Year of construction: 2025, Workpiece height 8-45 mm (optional: veneering up to 60 mm) Minimum workpiece length 100 mm Minimum workpiece width 100 mm Edge thickness 0.4-3.0 mm Feed speed 9.5 m/min Cutting unit - engine power 1 x 0.27 kW Milling unit 2 x 0.35 kW Milling unit 12,000 rpm Corner finishing unit - minimum workpiece length 250 mm Corner finishing unit - minimum workpiece length 1 x 0.35 kW Corner finishing unit 12,000 rpm Pre-milling unit 1x 1.1;1 x 0.75 kW Pre-milling unit 12,000 rpm Edge cutting unit: Glue removal unit: Polishing unit - engine power 2x0.18 kW Polishing unit 2800 rpm Retractable support with rollers: Diameters of exhaust ports fi 120 mm Compressed air pressure 6.5 bar Total power 6.7 kW Dimensions - L x W x H 4200x800x1500 mm Weight 1180 kg Dksb Hhev Duvvevphsl + 2000 euros for option with a PUR glue

Condition: new, Year of construction: 2024, This edge banding machine is used for finished edge banding of furniture components with veneer and PVC, ABS etc. edges. The maximum edge banding thickness must not exceed 3 mm. Edge thickness 0.4 - 3 mm Thickness of the glued boards 12 - 45 mm The difference in the width of the rim and the thickness of the board max. 4 mm The minimum length of the boards to be glued is 90 mm Mechanical feed speed 7 m / min Adhesive temperature 130–250 ° C Tank capacity 1.2 l The rotation of the milling heads of the pre-milling machine 9000 rpm Collecting size of the pre-milling machine 0 - 2 mm Rotation of milling cutters of the linear milling machine 10,500 rpm. Rounding radius R = 2mm Djb Hhvegykb Djphekl Trimmer ball rotation 8,800 rpm Rotation of polishing discs 2800 rpm Installed power 6.0 kW Compressed air pressure 7 - 8 bar Extraction connector min. 3,500 m3 / h fi 100 mm Extended width. table (steady rest) 560 mm Table working height 856 mm Dimensions (L x W x H) 3200 x 1200 x 1200 mm Net weight 500 kg

Condition: new, Year of construction: 2025, Edge thickness 0.4 - 3 mm Thickness of glued boards 12 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Dob Hhev Dt Spsvphskl Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Transport belt unit 1.5 kW Overall dimensions 3850 x 700 x 130 mm Weight 1000 kg Pre-milling: diamond cutter. Gluing Cutting Milling: two motors Radial scraper Flat scraper (glue) Spray system Polishing Interior lighting Automatic lubrication

Condition: new, Year of construction: 2024, Edge banding machine K34 with PLC control (including 15" touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm: jointing milling machine (including DIA tool) up to 3 mm milling depth, maintenance-free, coated glue pot with interchangeable pot preparation including glue discharge device, HF double-motor cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic milling adjustment and interchangeable plate milling cutter (combination version), free space, corner rounding milling machine, surface scraper (including pneumatic lifting device), robust chain drive, ball-bearing double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m/min., gluing up to 60 mm workpiece thickness. Joining head Whispercut Radius corner milling machine R = 2mm Quick-change preparation for corner milling machine Additional changeover motor for corner milling machine R=1 Radius scraper (incl. pneumatic excavation) Multi-radius scraper (R2/R1) Chassis Release agent spraying device Cleaning agent spraying device Protective spraying of edge Nesting Pneumatic 3-point adjustment Dob Houmr Svehvphekl Multifunctional milling machine LED lighting in the interior

Condition: new, Year of construction: 2024, The machine is on stock!!! Dobshymgde Hhvphekl Max. edge thickness 3 mm Min./Max. workpiece thickness 8 – 50 mm Min. workpiece length approx. 160 mm Feed speed 10 m/min Gluepot heating time approx. 3.5 minutes Power consumption Ø approx. 7.4 kW Electrical connection 400 V/3 phase/50 Hz (Transformed to your voltage) Table height approx. 900 mm Machine dimensions (LxWxH) 4300x1300x1400mm Weight approx. 900 kg Exhaust connection Ø 1 x 140 mm

Condition: new, Year of construction: 2024, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Dkeb Hhvsg Tu Rksphol Feed speed approx. 10 m/min. Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: new, Year of construction: 2024, Edge thickness 0.4 - 3 mm The thickness of the glued boards is 8 - 45 mm The difference in the width of the rim and the thickness of the board max 4 mm The minimum length of the glued boards is 170 mm The minimum width of the boards to be glued is 90 mm Mechanical feed speed 9 m / min Adhesive temperature 60–250 ° C 1.2 l tank capacity Rotation of the heads of the pre-milling machine 12,000 rev. / min. Collecting size of the pre-milling machine 0 - 2 mm Dkob Hhvogyi Utsphol Rotation of milling cutters of the linear milling machine 12,000 rev. / min. Rounding radius R = 2mm Trimmer ball rotation 12,000 rpm. Rotation of polishing discs 2800 rpm Installed power 6.0 kW Compressed air pressure 7 - 8 bar Extraction connector min. 3,500 m3 / h 3 x fi 125 mm Extended width. table (steady rest) 560 mm Table working height 960 mm Dimensions (L x W x H) 4030 x 640 x 1420 mm Gross weight 915 kg

Condition: new, Year of construction: 2025, min. / max. veneer thickness 0.4 - 3 mm min. / max. veneer height 12 - 47 mm (optional: veneering up to 60 mm) min. / max. material height 10 - 45 mm min. material width 100 mm min. material length 100 mm material pre-milling 2 motors with power (diamond cutter) 2.2 kW feed motor power 2.2 kW panel desk at eye level : chain feed : loading plate for PVC and ABS edges : mechanical pressure zone driven by the main pressure roller and a series of pressure rollers to minimize the glue layer : central pressure setting : container for glue granulate : glue application to the material using a glue roller : electronic temperature control, working temperature 180 - 200 °C pneumatic tape cutting guillotine : control lamp for element spacing : double trimming saw for cutting off front and rear excess material : precise linear guides : trimming in motion for high cutting precision : veneering speed 9.5 m / min flat and round milling top / bottom with vertical and horizontal guidance 2 x 0.55 kW, 12,000 rpm. scraper unit: polishing unit top / bottom 2 x 0.18 kW, 50 Hz, 2,800 rpm. height and tilt adjustment: extraction connector 3 x fi 120 mm, 1 x fi 100 mm, roller table extension 250 mm: noise-reducing housing with a window to view the units: trimming unit 0.44 kW glue roller unit 0.55 kW glue tank heater 2.2 kW compressed air connection 6.5 bar total power consumption 9 kW / 400 V dimensions L. 3590, W. 1220, W. 1686 mm weight 1100 kg • Pre-milling with counter-milling cutters placed on heads ensuring the highest quality of processing. • Front and rear cutting with a double saw. Upper and lower milling on a separate cutter. • Radial or flat scraper (to choose from). -polishing unit • Equipped with a control computer with an LCD display. • Very simple operation with switching on/off individual units with a single button. • In a word, an ergonomic and precise machine at a very favorable price offer, unmatched on the global market. • Standard function of a replaceable glue tank. Dkob Hov Dutbshvphjl

Condition: new, Year of construction: 2024, ON STOCK!!! Pre-milling unit End Trim saw Top and Bottom Trimming unit Corner Rounding Unit Surface Scraper Touch Screen Controller Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Feed speed: 10 m/min. Ready to operate: approx. 3.5min. Power consumption: ∅ approx. 7.4kW Electrical connection: 400V/3Ph/50Hz Table height: approx. 900mm Machine dimensions: approx. 4,050x1,300x1,400mm (LxWxH) Weight: approx. 820kg Exhaust connection: ∅ 1x140mm Edge Banding Machine with PLC Premilling (DIA-tools incl.) up to max. 2 mm milling depth Corner rounding unit Radiusmilling R=2 mm Radius edge milling R=2 mm Dkeb Hhvjglfwtjphjl radius profile scraper