Condition: as good as new (ex-display), Description:Vacomat 140/160 XPe- The Vacomat 140/160 XPe mobile dust extractor is our smallest model and ideal for single machine extraction. Air volumes of up to 1,593 m³/h can be conveyed with this extraction system using the vacuum method,e.g. for dedusting sliding table saws, jointers or thicknessers.- In the standard version, extraction is started manually at the push of a button. On request, an automatic start of the fan can be installed when the connected processing machine is switched on,so that the extraction system is not forgotten or unnecessarily operated in idle mode.- The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container.- The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure load cell and ensures maximum operational filter cleaning system- In the Vacomat 140/160 XPe, an integrated control cabinet ensures that the filter bags are cleaned electro-mechanically via a vibrator motor.- The control system is activated by querying the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaking starts automaticallyNo connection to compressed air and therefore no compressor is required for this regeneration mechanism. This results in a significant reduction in the noise level during cleaning.- An efficient pressure shock cleaning system (XPe-D) is available as an option, especially recommended for very high and particularly fine dust content (ATTENTION: overall height then 100 mm and length 280 mm).Cleaning via the compressed air tank takes place offline, after extraction UKOCONE FILTER- The Vacomat 140/160 XPe mobile dust extractor is equipped with patented SchukoCone® filter bags as standard.- The SchukoCone® filters are a successful combination of an externally loaded filter bag with an internally loaded cone. This innovative filter design offers approx. 60 % more filter surface area with a smaller surface area requirement.- SchukoCone® filter bags unfold their enormous potential particularly with fine dusts, where a large filter surface area and low filter surface load must be ensured.- By reducing the filter surface load, a longer service life of the filter is achieved. If the filter resistance is low, less fan power and therefore less electricity is EMBLY Ledpevwflnsfx Af Sshr

Condition: used, functionality: fully functional, filter area: 50 m², nominal flow rate: 5,090 m³/h, noise level: 75 dB, extraction nozzle diameter: 300 mm, Technical data Max. airflow 6000 m3/h Nominal airflow 20 m/s 5090 m3/h Nominal pressure 20 m/s At extraction speed 2680 Pa Extraction connection Ø 300 mm Cartridge filter - Filter surface 50 m2 Noise level 75 dB Chip container 2x250 l - With cartridge filter - With chip remover Lhsdpfox H Stiex Af Sor - With JET cleaning

Condition: used, total width: 920 mm, total length: 1,060 mm, total height: 920 mm, Price: On request - Documentation available: No - CE certificate present: No - Serial number: 9002/65837/10 - Main motor power [kW]: 3.45 - Connection diameter [mm]: 440 - Current consumption [A]: 6.2 - Power [kW]: 3.0 - Transport dimensions: 1060mm x 920mm x 920mm (l x w x h) Lhodpfsxwyd Ujx Af Sjr - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2017, Nedermann S / M / 68W sawdust extraction - after the technical review - year of production 2017 - ATEX marking TECHNICAL PARAMETERS: fan power 15 kW capacity 8000 m3 / h compression 4603 Pa vibration system for self-cleaning of filter bags 2 x 0.12 kW spigot diameter 300 mm dimensions (length / width / height) 490/125/360 cm PIPE SET INCLUDED: - 6 pieces of diameter 300 mm, length 1250 mm - 2 x 90 ° elbow - a set of pipes with a tee, diameter 250 mm, length 1400 mm Lhsdpfxsg Db U Uj Af Sjr - 300 mm tee by 2 x 250 mm - 45 ° elbow - 15 ° elbow

Condition: new, Year of construction: 2025, Industrial Dust Extractor DCV5200E+ – Maximum Performance in a Compact Design The professional industrial dust extractor DCV5200E+ is designed for the most demanding work environments. This high-efficiency unit is intended for removing sawdust, dust, and chips from woodworking machines, ensuring consistent extraction performance throughout the entire production cycle. Thanks to its compact design and strong suction power, the central dust extractor works perfectly both as a standalone machine and as a part of a multi-point extraction system. Key Advantages of the Machine Automatic filter-shaking system – ensures uninterrupted performance without the need for manual maintenance. Stable, hardened construction – eliminates vibrations and noise, ensuring long-lasting durability. Dynamically balanced metal impeller – quiet operation and failure-free performance in continuous use. 200 mm suction port – optimized airflow and increased extraction efficiency. 18 polyester filters – effective filtration of particles down to 5 microns, with optional HEPA filters available. Hermetically sealed plastic containers – quick replacement and 99.99% system tightness. Construction and Technology The DCV5200E+ is based on a proven, modular design with high rigidity and resistance to deformation. Thanks to the high tightness of the suction system, the machine efficiently extracts air without energy loss – which is especially important during the heating season. The fan blades feature optimized geometry, ensuring low energy consumption while maintaining maximum airflow efficiency. Precision and Work Efficiency The 3 kW three-phase motor delivers up to 5200 m³/h capacity and a suction speed of 30 m/s. This configuration allows several woodworking machines to be connected simultaneously without a drop in efficiency. It is ideal as a central extractor in high-dust production lines. Applications The DCV5200E+ dust extractor is intended for professional use in woodworking shops, furniture factories, and CNC production lines. It works effectively with: panel and sliding table saws, sanders and edgebanders, band saws and table saws, milling machines and thicknessers. Standard Equipment 18 polyester filters (5 microns) metal impeller and impeller housing hermetically sealed plastic containers integrated filter cleaning system Optional Equipment HEPA filter for particles below 1 micron extraction hoses and system connectors Ledpsx Hh Iijfx Af Sohr fill-level sensors Technical Specifications Parameter Value Motor power S1 3 kW / 400 V, 50 Hz Motor speed 3000 rpm Extraction capacity 5200 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 200 mm Suction speed 30 m/s Number of filters 18 Filter material Polyester (5 microns) Filter surface area 10 m² Dimensions (L × W × H) 2441 × 940 × 2270 mm Weight 260 kg

Condition: used, Year of construction: 2001, Used machine Equipment and technical data: - Working area width x height: 2400 x 1600 mm - Air capacity: 7000 m³/h - Motor: 2.2 kW - Exhaust duct: 400 mm - with energy-saving stand - with supply air channels Note: The Ex-lights shown in the pictures are not included in the scope of delivery! Lhsdpfsxdpl Ujx Af Sjr Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2025, Capacity: ~15,000 m³/h Motor power: 22 kW Filter surface area: 53.08 m² Helical gear reducer: 0.55 kW Vibration motor power: 0.17 kW (2 pcs.) Filter type: 3 micron, polyester Filter dimensions: Ø160 x 1100 mm Number of filters: 96 pcs. Automatic vibratory filter cloth cleaning system – during breaks and during filter operation, allows for continuous monitoring of proper operation. Ljdpsx D Akqjfx Af Sohr The filters used are classified as filtration category "G," allowing for air purification up to 0.2 mg/m³/h (H2).

Condition: new, Year of construction: 2022, functionality: fully functional, total width: 1,150 mm, total length: 2,275 mm, total height: 2,285 mm, noise level: 75 dB, extraction nozzle diameter: 300 mm, space requirement length: 2,640 mm, space requirement height: 2,985 mm, The Felder RL300 industrial extractor has been put up for sale due to the failure of the tender. Brand new, unopened packaging for 75% of the new price. Guaranteed, with commissioning Description: Air flow, max: 6000 m3/h Nominal air flow: 20m/sec, 5090 m3/h Vacuum: 450 Pa Filter surface: 50 m2 Extraction nozzle diameter: 300 mm Modern, bright, clean design Ljdpfxex H Srro Af Sohr Great and efficient performance Chipboard storage Cartridge filter JET cleaning Year of manufacture: 2022

Condition: used, total width: 1,400 mm, total length: 1,550 mm, total height: 2,510 mm, - Documentation available: No - CE certificate present: No - Serial number: 400201 - Main motor power [kW]: 18.8 Ljdpfsxwu Nxsx Af Sjhr - Flow capacity [m³/h]: 12500 - Negative pressure [Pa]: 3015 - Connection diameter [mm]: 460 - Output diameter [mm]: 435 - Power [kW]: 18.8 - Transport dimensions: 1550mm x 1400mm x 2510mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, type of input current: three-phase, TECHNICAL SPECIFICATIONS: - Engine: 50 kW - Capacity approx.: 30,000 m3/h - Motor speed: 2960 rpm - Impeller blade height: 230 mm Lhodoxyirmjpfx Af Sjr - Impeller speed: 2350 RPM - Number of blades: 8 - Inlet diameter: 500 mm - Outlet dimension: 480 x 380 mm - Overall dimensions (L/W/H): 240 x 150 x 150 cm - Weight: ~600 kg

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: fully functional, type of input current: three-phase, volume flow: 1,500 m³/h, negative pressure: 2,100 Pa, intake manifold diameter: 140 mm, overall weight: 345 kg, input voltage: 380 V, space requirement width: 750 mm, space requirement length: 1,320 mm, space requirement height: 1,905 mm, Spänex mobile extraction unit SMU-R15 Lhedpfx Afswanf Ue Sor Year of manufacture: 2020, unused, 2.2 kW 140 mm Ø extraction nozzle, 1,500 m³/h air flow 2,100 Pa negative pressure, 65 dB, H3 certified 165 l drum, dimensions: 1,320 mm length, 750 mm width, 1,905 mm height Weight: 345 kg

Condition: used, Used machine Equipment: with 4 bags with fan Price for self-collection including various piping components Availability: approx. mid-April 2026 Lhsdpfx Aexwz Nlsf Ssr Location: Hesse

Condition: new, Year of construction: 2025, Capacity ~ 15,000 m³/h Motor power 15 kW / 20 HP (optional: 18 kW motor) Filter surface area 57.9 m² Exhaust port diameter 400 mm Voltage 400 V Filter material polyester Filter permeability 3 microns Filter dimensions Ø152 x 1120 mm Number of filters 108 Dimensions (L x W x H) 4147.5 x 1129 x 2480 mm Weight 870 kg Scope of delivery: Polyester filter, 3 microns 5 containers 3 chimneys Filter cleaning using a vibration system with control Lhsdpfx Afex D Ah Ne Ser The automatic vibration filter cloth cleaning system allows for continuous monitoring of filter operation during breaks and during operation. The filters used are classified as "G" filtration category, which allows for air purification up to 0.2 mg/m3/h (H2).

Condition: new, functionality: fully functional, Year of construction: 2022, ATEX rotational valve, 1,5kw- 18rpm. Special heavy duty. SEW drive with cooler fan. Special knive system. Special 5 line sleeve system. Inert gas adding hole. Lhjdpfxex Dzc Ej Af Ssr Possible to buy 2 new, and 5 slightly used valves.

Condition: used, total width: 950 mm, total length: 2,330 mm, total height: 1,560 mm, - Documentation available: No - CE certificate present: No - Serial number: 63020 - Main motor power [kW]: 30 - Flow capacity [m³/h]: 18600 - Negative pressure [Pa]: 2635 - Connection diameter [mm]: 630 - Output diameter [mm]: 560 - Transport dimensions: 2330mm x 950mm x 1560mm (l x w x h) - Transport packages [pcs.]: 1 Financial information Ljdpfexwu Etsx Af Sohr VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, filter area: 108 m², suction capacity: 5,000 m³/h, Dust extraction unit, welding fumes extractor, self-cleaning cartridge filter suitable for plasma, laser, sandblasting, and shot blasting applications. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the unit. The fan is positioned on the clean side to minimize explosion risk. Motor power: 7.5 kW Capacity: 5000 m³/h Inlet diameter: 315 mm Cartridge filter elements (replaced 04.2025): 9 pcs. Filtration surface: 108 m² Rotary valve for dust discharge Stock no.: 1076 Device dimensions: Filtration unit: Width: 1.95 m Lhodpfx Ajxx R Nksf Ser Depth: 1.35 m Height: 3.95 m Base: 1.66 m x 1.30 m Enclosed fan: Width: 1.40 m x 1.25 m Height: 1.25 m

Condition: excellent (used), Extraction / Mobile dust extractor Vacumobil EA160A Lsdpfx Aerbiiwef Sohr Extraction diameter: 160 mm Year of manufacture: 2006 Weight: 310 kg Rated air flow: 2050 m³/h Minimum air flow: 1447 m³/h 3.4 kW Automatic, motor-driven filter cleaning

Condition: used, Year of construction: 1996, Used machine Lsdpfx Asxwz H Rjf Sehr Year of manufacture: 1996 Features and technical data: - Berkmann extraction systems operate on the principle of displacement flow, meaning that a negative pressure is created on the wall side of the room, while an overpressure is generated on the opposite side by the supply air unit. - Almost the entire room air flows in a directed and low-turbulence manner from the supply air side toward the exhaust air side. - Paint mist generated within the flow area is captured and discharged. - With Berkmann extraction systems, air is extracted across the entire area, not just in the collection zone in front of the spray wall as with conventional systems. - This allows larger components to be painted as well. - It is also not necessary to work directly in front of the extraction unit. - The patented 'gap extraction' enables high extraction velocities at all sides (including at floor level, where solvents accumulate). - Due to the special arrangement, extremely large filter surfaces could be accommodated, resulting in very long filter service lives. - Compared to traditional spray booths, Berkmann extraction systems operate with significantly lower air volumes, enabling energy savings of up to 50%. - Includes paint mist extraction unit BASIC 7000 m³/h - With supply air unit - With solvent evaporation unit - System is installed underground with grating cover - Dimensions of grating approximately 3,500 x 3,400 mm - Filter area of the unit: approx. 3.7 m² - Supply air unit approx. 82 kW, type 3072 FL/WW (two-stage) - Solvent evaporation unit approx. 3,000 m³/h exhaust air volume - Motor 1.1 kW - With supply air duct system featuring 4 large-area filter ceilings with explosion-proof lights - With control cabinet featuring microprocessor control - With used Kremlin paint application unit Price excludes dismantling, removal, and collection on site Availability: approx. mid-April 2026 Location: Hesse

Condition: used, Year of construction: 2023, Dimensions (L/W/H) , mm Filter capacity 122 m² Number of filters , St. For sale on behalf of a customer Technical details in pdf attachement ----- Schuko chip silo, including extraction system with overpressure filter, industrial briquetting press in cast iron design Type: Compacto CT 1100 S-20 ----- ----- Item 1 Schuko briquetting press and extraction system Item 2 Schuko 1 Radial fan located on the raw air side Item 3 Schuko pipe components Item 4 Schuko pneumatic energy-saving slide valve Item 5 Schuko overpressure filter system Item 6 Schuko return air Item 7 Schuko safety components in accordance with EN 12779 Item 8 Schuko industrial briquetting press in cast iron design Item 9 Schuko electrical control cabinet Lhedow Nh Eljpfx Af Sor ----- Price of the above extraction system on request! ----- (Technical data according to manufacturer – no guarantee!) All prices quoted are net, plus statutory VAT.

Condition: excellent (used), System is like a new, very high quality. Including: 5 inch tube 31m, 4 inch tube 40m and 3 inch tube 41m Lot of standard radius elbows for these 3 diameters, standard 90 degree ty's, standard reducing couplings, compression couplings, threaded inlet valves etc. Lhjdpfx Aex Anthjf Ser

Condition: used, Year of construction: 1999, total height: 780 mm, total width: 1,080 mm, total length: 1,120 mm, - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 40646 - Voltage [V]: 400 - Current consumption [A]: 6.6 - Power [kW]: 3.0 - Transport dimensions: 1120mm x 1080mm x 780mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT Lhsdpjxv U Tzefx Af Ssr VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2016, Demonstration Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, featuring a maximum air flow rate of 2300 m³/h. The extraction unit is in like-new condition, has been inspected and refurbished by our qualified technicians. Technical data: Ledexxkr Sopfx Af Sehr - H3 dust tested - Extraction connection diameter: 200 mm - Automatic chip shaker - Steel impeller - Max. air flow rate: 2300 m³/h - incl. briquette press FBP 60 (50-70 kg/h) - Year of manufacture: 2016 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL, briquette press, briquetting Reference: R-A0117

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: AF25-X, filter area: 200 m², volume flow: 25,000 m³/h, total width: 2,450 mm, total length: 3,600 mm, total height: 7,000 mm, Equipment: documentation/manual, DUSTY AIR FILTER - ATEX Design air flow: 25,000 m³/h Structure: Galvanized, press-formed and bolted sheet metal, thickness 2-3-4 mm Total filter surface area: 200 m² Filter fabric: Antistatic, 500 g/m² Pre-dust separation zone Lhodpfxsxu Df Rj Af Ssr ATEX explosion relief panels - horizontal positioning Discharge: Motorized screw conveyor 1.1 kW, rotary valve 0.75 kW Access ladder and upper guardrail Electrical control panel Electric suction fan 30 kW

Condition: used, Year of construction: 2017, total height: 3,000 mm, total width: 1,000 mm, total length: 3,350 mm, Empty weight: 1.000 kg - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 1313000055R - Capacity [m³/h]: 6000 - Number of filter bags [pcs]: 45 - Filter length [mm]: 1860 - Filter diameter [mm]: 200 - Filter surface area [m²]: 55 - Connection diameter [mm]: 310 - Main fan [pcs]: 1 - Main fan power [kW]: 5.5 - Briquetting press present: Yes - Collection bins: Yes - Number of bins/bags [pcs]: 2 - Transport dimensions: 3350mm x 1000mm x 3000mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information Lhjdpfxsxixfbo Af Sor VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2024, For sale is a Felder AF-22 extraction unit with a maximum air volume flow of 3100 m³/h. The extraction unit is in very good condition and has been checked and serviced by our specialist staff. Technical specifications: - Extraction capacity: 3100 m³/h - Max. negative pressure: 2510 Pa Lodpjxxiy Usfx Af Sohr - Extraction connection Ø 160 mm - Chip container volume: 2 x 200 liters - Incl. dust filter cartridge + shaker device - Year of manufacture: 2024 - Motor power: 3 kW The extraction unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: extraction unit, dust extraction, filter, cartridge filter Reference: R-E28WO