Condition: used, Year of construction: 1996, ALKO clean air filter system with fan, type UF 2. Nominal flow rate 10,000 m³/h. Filter area 50 m². Weight: 845 kg. Nominal pressure 4,000 Pa. Air pressure/connection max. 8.5 bar. Frequency control. Filter system with container and discharge system. (Prepared for connection to a briquette press). Return air duct included. Filter size approx. 3,000 x 1,250 mm. Total area approx. 4,000 x 1,250 mm. Good general condition. Storage location: Customer. Dkelovviymsq Rhi Nel

Condition: used, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve Dkslqou T Hrps Rhi Nsl

Condition: good (used), Year of construction: 2022, Functionality: fully functional, type of input current: three-phase, filter area: 5.31 m², volume flow: 1,400 m³/h, negative pressure: 2,210 Pa, nominal flow rate: 884 m³/h, overall weight: 205 kg, total width: 830 mm, total length: 1,100 mm, total height: 1,600 mm, input voltage: 400 V, noise level: 71 dB, extraction nozzle diameter: 125 mm, tank capacity: 165 l, Return device with slight signs of wear. Serial number: 125PM2246040001 Year of manufacture: 2022 Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Djlqjwgz T So Rhi Njkl High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the Chip container due to large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminum-coated polyester fleece, resulting in a long service life Filter comes standard with an antistatic design, tested and approved according to category M-BIA The fan is installed downstream of the filter If a warranty is stated in the item description and/or in the description of the scope of delivery, this does not affect your statutory rights against your seller. Please refer to the warranty conditions for the scope, duration, contents, and the guarantor. We assume no liability for printing errors, mistakes, or incorrect representations. Technical and visual changes are reserved. Some images show optional accessories. Delivery is subject exclusively to our terms of delivery and payment. Sales are made through specialist retailers.

Condition: used, Used fan Motor 1,5 kW 2670 rpm Availability: short term: Storage location: Rhineland-Palatinate Dkelq Rhjq Hh Exsi Njl

Condition: used, Year of construction: 2011, - Capacity [m³/h]: 9000 - Number of filter bags [pcs]: 40 - Filter length [mm]: 2480 - Filter diameter [mm]: 240 - Filter surface area [m²]: 80 - Connection diameter [mm]: 400 - Main fan [pcs]: 1 - Main fan power [kW]: 11.0 - Disassembled: Yes - Control cabinet present: Yes - Shaking system: Yes - Extraction: Overpressure installation - Year: 2011 - Documentation available: No - CE mark available: Yes - Serial number: 8014540S Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dkslqswa Ig So Rhi Nel Peter Stroomberg

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade fair machine *Available upon request Combination of: mütek MPP 60 briquetting press + MMJET 350 dust extractor *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected. 1. Technical specifications for the briquetting press: Our best-selling briquetting press, the classic. + Proven, simple technology for extremely low error rates + 25 years of experience, ongoing development, and know-how + Several thousand machines in use with satisfied customers + Excellent price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Maximum briquette stroke: 40 mm Optional briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phase Floor area of entire system: 2.2 x 1.1 x 2.8 m L x W x H Height - 2.8 m (special container) Dsljd Su Hxoq Rhi Nokl Delivery also possible in two components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Cooling option for crimping tongs: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant 2. Technical specifications for the MMJET 350 clean air extraction unit: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content: 0.1 mg/m³ Max. flow rate: 8000 m³/h Nominal flow rate (20 m/s): 6950 m³/h Filter area: 71 m² Negative pressure: 2630 Pa Automatic filter cleaning Cartridge filter Jet cleaning Powder fire extinguisher installed (inspected every 2 years by a specialist company) Raw material requirements: - The moisture content (dry) must be between a minimum of 6 and a maximum of 18% - Compressed air provided by the customer - Maximum chip length 15 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The customer must select a press large enough to remove more material than is sucked in at peaks. - The feed must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: used, Year of construction: 2002, Nominal flow rate: 3500 m³/h. Motor: 1.5 kW. Baffle area: 2000 x 1000 mm with top and side baffles. Dkjlsvviz Rsq Rhi Njl Storage location: Nattheim.

Condition: good (used), Various suction collectors, suction distributors Doljtp Hpbsq Rhi Nskl several available, see photos for details Extraction bell B, C: 140 euros each The parts can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 1990, Used machine Built approximately 1990 Djlqswb Ehvj Rhi Nskl Technical specifications: W x H 2000 x 1600 mm + 2 side baffles and 1 top baffle Fan diameter 500 mm Availability: Short term Location: Rhineland-Palatinate

Condition: used, Year of construction: 2016, POWER UNIT 350+ P-ZRS 1 piece 400 V, NW 355, nominal volume flow 7127 m³/h according to GS-HO-07, max. volume flow 10000 m³/h, compressed air cleaning, pre-separator, integrated automatic extinguishing system, installation with hopper and substructure 960 mm rotary valve for pressure-free discharge into a transport pipe or other disposal facility, power unit for 3 kW transport fan APU 140-350 Option 8ME&8S External 1 piece machine detection for up to 8 processing machines via converter coils or potential-free contact and automatic slide control for up to 8 electro-pneumatic or motor-driven gate valves in 24 V; external junction box for independent wall mounting fill level indicator via ultrasonic sensor 1 x Alko Power Unit 140-300 [sensor and housing] flashing lamp fault indicator 1 x fill level limit indicator (Retonovio) 24 V DC 1 x inclined tube auger for mounting on APU 350 P rotary valve ZRS 960 1 x consisting of: 1 x receiving hopper dimensions 1,500 x 140 x 280 mm primed, painted with plastic lining 1 x metal bend 45° 3.5 m metal combination pipe 4 x metal pipe couplings 5.6 m conveyor spiral 1 x drive unit 45° with 200 mm outlet including maintenance opening, overfill sensor shearing, drive shaft and grounding belt 1 x spur gear motor 400 V / 0.75 KW / 197 rpm. With special shaft and reinforced bearings. TW bimetallic switch "normally closed". 1 x pipe 500 mm long, DN 200 mm, galvanized. 1 x clamping ring for pipe construction, 2 mm, DN 200 mm. Note: Flow rate is 1.5 m³/h. Chipper - specification for friction-free operation: perforated screen less than or equal to 15/20 mm. Additional charge for capacity increase to 10,000 m³/h. Item No. ER-M-161432. 1.00 pc. as described above in the machine description. Dolq Rhsvviyaei Nokl Storage location: Nattheim

Condition: new, Year of construction: 2022, Fan new, year of construction 2022 Motor power 15 kW Volume flow 7783 m³/h Fan position GL 270 Total pressure increase 3502 Pa Connection 350 mm Delq Rhistpdp Ue Nekl Weight 328 kg Availability: immediately Storage location: Hochheim

Condition: used, Year of construction: 2009, Used dust extractor Year of manufacture: 2009 Condition: minor external damage, fully functional Nominal flow rate: 1120 m³/h Min. flow rate: 814 m³/h Extraction nozzle: 120 mm 2050 Pa Filter area: 4.3 m² Motor: 2.2 kW, 400 V HxWxD: 1985 x 1085 x 650 mm Weight: approx. 99 kg Availability: Short-term Storage location: Flörsheim Delq Rjvu Iduohi Nskl

Condition: new, New machine Mobile dust extractor Dimensions and weights: Length (product) approx. 1000 mm Width/depth (product) approx. 500 mm Height (product) approx. 2100 mm Net weight approx. 39 kg Chip collection volume 110 l Nominal diameter of the suction nozzle inlet 203 mm Dkjlqswb Ehpo Rhi Njl Nominal diameter of the suction nozzle outlet 1 x 100, 1 x 120 mm Electrical data: Idle speed 2950 rpm Connection voltage 230 V Mains frequency 50 Hz Power input 1.5 kW Power output 1.05 kW Filter: Filter area 1.92 m² Noise emission: Sound pressure level max. 85.7 dB(A) Flow rate: Nominal flow rate 1900 m³/h Maximum negative pressure 1700 Pa Scope of delivery: Extractor, fine filter bag, chip bag Availability: Short-term Storage location: Hochheim

Condition: new, Year of construction: 2021, - Dust extractor up to 160mm Dkjlq Rhiokwhynj Nel

Condition: new, Year of construction: 2022, Suction unit already used for demonstration purposes Year of construction 2022 Djlq Rhekwhzhsi Nskl not dust-tested For milling, planing and sawdust High-quality, stable chassis for easy maneuvering Double-woven fine filter bag For milling, planing and sawdust (not suitable for dust) Extraction unit can be rotated through 180° to allow extraction from below or above Sturdy metal fan wheel High-quality chassis as standard for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Double-woven fine filter bag Scope of delivery: Two filter bags, two chip bags Nominal volume flow2800 m³/h Negative pressure max.1900 Pa Filter area2 x 1.92 m² Chip collection volume2 x 120 l Nominal width external suction nozzle inlet203 mm Nominal width external extraction connection outlet1 x 100, 2 x 120 mm Idle speed2950 min¯¹ PU1 Dimensions and weights Length approx.1500 mm Width/depth approx.500 mm Height approx. 2100 mm Weight approx. 53 kg Electrical data Input power2.2 kW Supply voltage400 V Mains frequency50 Hz Noise emission Sound pressure level max.87.5 dB(A) Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2022, Paint mist extraction New device Year of construction 2022 Ideal for woodworking companies, joineries/carpentry workshops and the trades in general Highly efficient air purification with high separation efficiency Mobile device for use at various locations in the workshop Easy handling Certified for ATEX Zone 2 Long filter service life Dolqjnvkggo Rhi Nskl Delivered ready to plug in Suction nozzle diameter 300 mm L x W x H approx. 1012 x 1135 x 1405 mm Connection 1.5 kW / 400 V Filter area 1 m² Noise emission max. sound pressure level 72 dB(A) Volume flow max. 500 Pa Weight 175 kg incl. starter set for FAG 1-4 Diameter 300 mm (3 m hose, 2 hose clamps, 1 collar with flange ring, 1 cover flap for outer wall) Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2023, New machine Year of construction: 2023 NESTRO® dust extractor, a new generation, more powerful, more compact, more economical and with some highlights that will inspire you. Vacuum filter for extracting and filtering wood dust and wood chips. H3 test according to GS-HO-07 (BGHM), GS terminated. Extinguishing device fire damper / oxygen seal. Vacuum filter with JET compressed air pulse cleaning including suction nozzle, 5 m cable for connection socket (protective measure zeroing), . Suction nozzle left / fan right Technical data: Volume flow max./nom.: 6,000 / 5,850 m³/h Negative pressure f.v./nom.: 2,950 / 2,400 Pa Suction side connection: Ø 300 mm Operating mode: Continuous operation Type of current: Three-phase current Power consumption: 7.5 kW / 16 A / 50 Hz Fan / drive: IE3 asynchronous motor Filter area: 36.2 m² Filter regeneration: JET / automatic Compressed air consumption per cycle: 560 Nltr. Chip disposal: Chip garbage can with PE bag PE bag (consumable material): . 500020 Collection volume 3 x 0.16 m³ Delsudqhpjq Rhi Nskl Weight: approx. 1,250 kg Noise value according to EN 11201: 72-74 dB(A) according to MRI (+/- 4dB) Length x width x height: 3880 x 1020 x 2250 mm Necessary connections: Compressed air standard coupling NW 7.2; 6 bar, compressed air dry and oil-free 1 x 32 A CEE socket / 25 A back-up fuse For systems with chip bag filling, uniform filling cannot be guaranteed due to different extraction volumes and differing chip/dust contents Availability: at short notice Storage location: Hochheim

Condition: used, Year of construction: 2021, Used machine Year of manufacture 2021 525 operating hours Dust extractor Extraction nozzle diameter 350 mm Motor 11 kW, 400 V, 50 Hz Delq Rju Dcwlehi Nokl Max. volume flow 8000 m³/h Nominal volume flow at 20 m/sec: 6950 m³/h Negative pressure at the total connection at 20 m/sec: 2630 Pa Filter: 23 cartridge filters Filter area 71 m³ H3 "GS dust tested residual dust content < 0.1 mg/m³ Pneumatic JET filter cleaning (compressed air supply on site) Compressed air connection 3/4 inch, connection pressure 7-12 bar with 50 NL/min Operating pressure in the device 6 bar Extinguishing device with powder extinguisher, dry fire extinguisher 12 kg Frequency converter Weight approx. 865 kg with briquetting press MPP 60 Briquette diameter 50 mm Throughput (depending on material) max. 60 kg/h (based on a bulk density of 200 kg/m³ Motor power 5.5 kW Oil quantity 110 l Silo diameter 1000 mm Silo content; approx. 0.7 m³ Pump 27 l Hydraulic pre-compressor with oil hydraulic cooling with fill level monitoring Incl. special container for RL 350 Floor area approx. 2200 x 1100 x 3100 mm Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2021, Year of manufacture 2021 Dimensions and weights Length (product) approx. 1700 mm Width/depth (product) approx. 600 mm Height (product) approx. 2400 mm Weight (net) approx. 69 kg Chip collection volume 2 x 215 l Nominal diameter of suction nozzle inlet: 260 mm Nominal diameter of suction nozzle outlet: 2 x 100, 2 x 120 mm Electrical data Idle speed 2950 rpm Supply voltage 400 V Mains frequency 50 Hz Power input 3.8 kW Power output 3 kW Dslq Rewb Ekdjhi Nskl Filter Filter area 2 x 2.4 m² Noise emission Sound pressure level max. 89.9 dB(A) Voltage flow Nominal flow rate 4300 m³/h Vacuum pressure max. 2000 Pa SCOPE OF DELIVERY Fine filter bag Two bags of shavings Availability: Short-term Storage location: Flörsheim

Condition: new, mobile suction unit Exhibit Dimensions and weights Length (product) ca.1000mmWidth/Depth (product) ca.500mmHeight (product) ca.2100mmWeight (net) ca.39kgSwarf collecting volume110lNominal width outside exhaust inlet203mmNominal width outside exhaust outlet1 x 100, 1 x 120mm Electrical data Idle speed2950min¯¹Power supply230VMains frequency50HzPower input1,5kWApower output1,05kW Filter Filter area1,92m² Noise emission Dkolekwhy Ijq Rhi Nsl Sound pressure level max.85.7dB(A) Volume flow Nominal volume flow1900m³/hUnderpressure max.1700Pa SUPPLYFine filter bag, chip bag Availability: short term Storage location: Hochheim

Condition: new, mobile suction unit Exhibit Dimensions and weights Length (product) ca.1000mmWidth/Depth (product) ca.500mmHeight (product) ca.2100mmWeight (net) ca.39kgSwarf collecting volume110lNominal width outside exhaust inlet203mmNominal width outside exhaust outlet1 x 100, 1 x 120mm Electrical data Idle speed2950min¯¹Power supply230VMains frequency50HzPower input1,5kWApower output1,05kW Dolq Rhiokwhzds Njkl Filter Filter area1,92m² Noise emission Sound pressure level max.85.7dB(A) Volume flow Nominal volume flow1900m³/hUnderpressure max.1700Pa SUPPLYFine filter bag, chip bag Availability: short term Storage location: Hochheim

Condition: used, Used suction parts Pipes in the usual dimensions from 80 - 350 mm Branches from 80-80-80 to 350-350-350 Bends 22.5°, 45° and 90° Delq Rhentcu Soi Nskl Electric gate valves Pneumatic sliders controls Special components of all kinds If you are interested in an offer, please send us your detailed specification Availability: immediately Storage location: Hochheim

Condition: new, Year of construction: 2021, Exhibition unit Year of manufacture 2021 Dimensions and weights Dkelekwhy Deq Rhi Njl Length (product) ca.1700mmWidth/Depth (product) ca.600mmHeight (product) ca.2400mmWeight (net) ca.69kgSwarf collecting volume2 x 215lNominal width outside exhaust inlet260mmNominal width outside exhaust outlet2 x 100, 2 x 120mm Electrical data Idle speed2950min¯¹Power supply400VMains frequency50HzPower input3,8kWApower output3kW Filter Filter area2 x 2,4m² Noise emission Sound pressure level max.89.9dB(A) Volume flow Nominal volume flow4300m³/hUnderpressure max.2000Pa SUPPLYFine filter bag, two chip bags Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2010, Used suction unit not dust-tested Technical data L/W/H mm640/490/1880 Air output m³/h1000 Negative pressure Pa1200 Filter area m²1 Filling quantity l80 Hose length mm2500 Hose connection Ø mm100 Weight approx. kg30 Motor equipment 400 V/50 Hz Dkelq Rhioqa Nzwe Nel Power input kW (HP)0.55 (0.75) Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 NESTRO® dust extractor, a new generation, more powerful, more compact, more economical, and with several highlights that will delight you. Dkolq Rhijudqhve Njl Includes a new extinguishing system with drop flap and oxygen deprivation, 5 m cable and CEE plug with reversing pole, IE3 fan drive, H-O-A selector switch, and integrated emergency stop function. The NE-J ECO is, of course, H3-certified. The newly designed model fits into any standard sea container. The suction nozzle with blow-in box and check valve is located centrally on the front of the dust extractor. The highly efficient JET filter regeneration guarantees long filter service life, low filter resistance, and thus high extraction performance. The dust bins are each equipped with four swivel casters, a viewing window for level control, and a sturdy chip collection bag. Technical specifications: • Maximum/nominal flow rate: 8,000 / 6,925 m³/h • Nominal vacuum: 3,400 / 2,750 Pa • Suction-side connection: Ø 350 mm • Operating mode: Continuous operation • Current type: Three-phase current • Power consumption: 11 kW / 21 A / 50 Hz • Filter area: 38 m² • Filter regeneration: JET / automatic • Compressed air consumption per cycle: 560 Nl • Chip disposal: Chip bin with PE bag Weight: approx. 1,250 kg Noise level according to EN 11201: 72-74 dB(A) according to MRI (+/- 4 dB) Length x Width x Height: 1,060 x 3,981 x 2,174 mm Required connections: Standard compressed air coupling NW 7.2; 6 bar, dry and oil-free compressed air 1 x 32 A CEE connection socket Availability: Short-term Storage location: Flörsheim