Used other extractors & exhaust units for sale (32)

Condition: excellent (used), functionality: fully functional, External dimensions: length 5m x width 3m x height 6m Filtration area: approx. 112 m² Engine power: 11 kW Capacity: approx. 15,000 m³/h Mechanical cleaning of filter bags Bwodpfezi Rkcex Anqow Return channel for cleaned air

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,000 mm, filter area: 8,000 m², total length: 3,000 mm, total height: 1,350 mm, TECHNICAL SPECIFICATIONS Dimensions [mm]: 3,000 × 1,000 × (H) 1,350 Extraction outlet diameter [mm]: 320 Bwsdpfx Ajzlrvronqjw Airflow rate [m³/h]: 8,000

Year of construction: 1999, condition: good (used), Table dimensions 2000 x 1000 mm Motor output 0,75 kW Bwodpfx As Aa A I Ejnqow Air consumption 4300 m³/h Year 1999

Condition: ready for operation (used), Year of construction: 2012, Schuko Type Octopus 30 Ø Connection: 200 mm Required air volume: 3,000 m³/h Required negative pressure: 1,100 Pa Table length: 3,280 mm Table width: 1,000 mm Table height adjustable from 700 to 1,000 mm Max. sound pressure level: 63 dB(A) Bsdpfx Aoyz St Esnqoww Weight: 200 kg Year of manufacture: 2012

Condition: used, Year of construction: 2021, total height: 1,800 mm, total length: 1,200 mm, total width: 1,000 mm, overall weight: 150 kg, hose length: 10,000 mm, space requirement height: 1,800 mm, space requirement length: 1,200 mm, space requirement width: 1,000 mm, transport length: 1,200 mm, transport width: 1,000 mm, transport height: 1,800 mm, tank capacity: 50 l, No. 04521 Bjdpfx Aox Upqhjnqsww Cyclone pre-separator ESTA ZA 50 Unused, year of construction 2021, in new condition Filter relief for very large amounts of dust The stationary cyclone pre-separators are installed upstream of the actual filter unit and are used to pre-separate dry and free-flowing dusts. Medium and coarse dust particles are already separated in advance so that only the fine dust still needs to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% with an average particle size of at least 150 microns. Top cyclone diameter 282 mm Cyclone height 1458 mm Dust container 50 liters Top connection pipe diameter 50 mm Container connection pipe diameter 82 mm Including approx. 10 m suction hose, diameter 50 mm Transport dimensions approx. 1200 x 1000 x 1800 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2013, condition: like new (used), we sale 3 fire dampers for the isolation of duct penetrations between fire compartments: 1. TROX Technik FKR-01/02-90K, 510x600, year of manufacture 2013. Bodjg Rpibepfx Anqoww 2. TROX Technik FKR-01/02-90K, 630x600/Z42, year of manufacture 2013. 3. SCHMIDLIN K90, 310x700, year of manufacture 2003 sale in current condition as seen. All are dismantled properly FCA Oradea, Romania

Condition: used, functionality: fully functional, - Manufacturer: Dřevo Trust a.s., Loučná nad Desnou - Height: approx. 18 m - Clearance height: 4.8 m - Volume: approx. 140 m³ - Shell height: 9 m Bedpfx Anjxa Eu Rjqoww - Shell diameter: 4.5 m - Discharge motor power: 15 kW - The silo was subsequently equipped with a particulate separator (cyclone)

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Bwsdsyg Nu Njpfx Anqow

Condition: used, Substation for wood chip extraction – Wood chip extraction system Brand: Fida Bwsdsyx Digepfx Anqjw Installed power: 37 kW System equipped with 98 filter bags (Ø 250 mm, height 2810 mm), designed to ensure high suction and filtration capacity. Overall dimensions: 8500 x 2500 mm

Year of construction: 2001, condition: excellent (used), Features a rake. Capacity: 1755 m3/h 1 compartment Dimensions: Height: 260 cm Width: 85 cm Length: 110 cm Bwsdpfxohqb Sws Anqjw Inlet diameter: 160 mm

Condition: like new (used), Year of construction: 2023, Felder FST 160 Sanding Table Technical Data Dimensions [mm]: 1660 x 1020 Bodsy Agp Dspfx Anqoww Working height [mm]: 726–1026 Extraction port diameter [mm]: 140 Year of manufacture: 2023 Price: 1100.-

Year of construction: 2020, condition: refurbished (used), Dear customers, Bwedpoftb Ebofx Anqew To ensure a fast and reliable response to your inquiry, we kindly request that you contact us preferably via email. This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! For suction diameters from 120 to 700 mm. Please let us know your volumetric flow rate, and we will select the right cyclone for you. Various designs available: - Legs, made of painted square steel profiles - Cell wheel lock and transition piece with inspection flap - Inlet box with check valve - Tangential outlet with/without pressure relief area - Square outlet with/without pressure relief area - Sound insulation Of course, you can also purchase all accessories from us, such as fans, suction pipes, deflector hood, etc. Mode of operation: The contaminated air is introduced tangentially into the cylindrical upper part, causing the air to rotate. The material is forced outwards towards the circumference of the cyclone under the influence of centrifugal force and is discharged through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located outlet pipe at the top. The separation efficiency increases with the feed rate, but so does the pressure loss and, consequently, the energy consumption. Therefore, it is important to find a good compromise. We have developed a range of cyclones that are optimized for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industries. Below, you can select the cyclone with the right size based on the air volume and a typical pressure drop in the range of 1000 Pa. Operating pressure +/- 5000 Pa

Condition: used, A block separator or block trap in mint condition for sorting out wooden blocks in extraction systems. Technical data: - Pipe: 300 mm - Length: 1,170 mm Bsdpfxjztvwps Anqsww - Width: 380 mm - Height: 820 mm

Condition: used, Table dimensions 1250 x 750 mm Bwjdpfoxcp Nwsx Anqjw

Condition: new, Year of construction: 2024, functionality: fully functional, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably via email. This will allow us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. Bodpfx Anjuzf Ihsqjww We look forward to hearing from you and will be happy to assist you! Extraction table without back wall/side walls Technical data: Work surface: 2,000 x 1,000 mm Working height: 850-950 mm (manual adjustment) Width: 2250 mm (including power strip) Power strip with tool storage: 2x 230 V socket with flip-open cover, 2x compressed air couplings, power cable and main switch Extraction nozzle Ø 160 mm, with flange

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1510x1250x1400 mm Weight 600 kg Total power requirement 30 kw Bwedovz Enqepfx Anqew

Year of construction: 2025, condition: new, Dimensions (L/W/H) 910x1200x850 mm Weight 400 kg Bwjdpovz Exvefx Anqow Total power requirement 18,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1410x1130x1295 mm Bedpfx Anevz Ei Ijqjww Weight 320 kg Total power requirement 22 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 800x847x790 mm Bsdevz E Dlspfx Anqoww Weight 250 kg Total power requirement 7,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 880x1037x820 mm Weight 188 kg Bedpfovz Ew Ejx Anqsww Total power requirement 11 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 890x1081x830 mm Bjdpfx Ajvz Emasnqoww Weight 268 kg Total power requirement 15 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 690x771x790 mm Weight 130 kg Total power requirement 5,5 kw Bodpfovz Enwjx Anqjww

Condition: new, Year of construction: 2026, Bag Clamp for CORMAK FM300, FM300S and FM300SA Dust Extraction Systems The CORMAK bag clamp is designed as a component for FM300, FM300S and FM300SA dust extraction systems. Its purpose is to securely attach the bag to the extraction outlet, providing a stable connection and reducing the risk of leaks during operation. Its solid construction and simple operation allow for quick bag replacement and efficient maintenance of the extraction system. Key Advantages Original CORMAK component ensuring a perfect fit for the extraction system. Secure bag attachment ensuring proper operation of the extraction system. Quick installation and removal for easy replacement of consumable components. Bodpfxjzz N Tye Anqsww Durable construction designed for regular use in workshops and manufacturing facilities. Application The clamp is designed for use with CORMAK FM300, FM300S and FM300SA dust extraction systems used in joineries, workshops and woodworking facilities. Compatibility Specification Value Extraction system models FM300 / FM300S / FM300SA Component type Bag clamp Application Securing bags in dust extraction systems

Condition: like new (used), A stainless steel screw conveyor (in mint condition) for an extraction system upstream of the rotary valve. Technical data: Bwjdpfxezzzuis Anqew - Length: ~ 530 mm - Diameter: ~ 145 mm

Year of construction: 2022, condition: as good as new (ex-display), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal "Tested for wood dust according to BGI 739-1". YOUR ADVANTAGES Accessible from 4 sides Can be loaded with up to 150 kg Manual, tool-free height adjustment with scale Recessed longitudinal sides for edge grinding Workpiece-friendly beech wood grating (removable) Funnel-shaped air duct to the extraction nozzle TECHNICAL DATA AST 1.5 BASIC Extraction nozzle 140 / 160 mm Required extraction capacity 1,500 m³/h Negative pressure at the nozzle at 22 m/s 1,000 Pa at DN140 mm 700 Pa at DN160 mm Adjustable working height from 735-1,015 mm Working area (W x L) 946 x 1,500 mm Bsdpfx Anedqzhbeqoww Dimensions (W x L) 1,000 x 1,600 mm Weight approx. 73 kg