Used Double-sided edge Banders for sale (72)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof enclosures/cabins SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) No. 2 Milling units (2 x Kw 4 ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° Dolimwjl Hydmolbekl No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape)

Condition: used, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by C.N. mm 2500 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed m/min 40 Feed speed with rounders m/min 20 Motorized rubberized pressure belt Belt with bearings with retractable pins (distance between pins mm 500) Squaring part composed of (for each side): Anti-adhesive group Automatic timed anti-splinter group Double shredder group Free space for possible addition of group Edging part composed of (for each side) Gluing group with pre-melting unit and glue tank Automatic adjustment of edge pressure rollers Edge holder magazine with n° 2 positions Two-motor trimming group Overlapping trimming group FK rounding group 0-90° tiltable Tupi group (moving side) Group edge scraper Glue scraper group Brush group Anti-adhesive group Dkjljv Ipileimwlbsl

Condition: repair required (used), Year of construction: 1996, machine/vehicle number: 0-201-23-1725, Dear Sir or Madam, Djlimwov H Azfslbjkl We are selling our CNC machine from 1996. The machine was able to mill and edge form plates but it had not been used for a long time (approx. 3-5 years) because it had problems with precise form cutting and edging. The information contained herein is written to the best of our knowledge and belief. This machine is a used machine. Any problems after purchase are not covered by the guarantee. Kind regards

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Stefani Ibimatic Double Edge Bander Year 1998 S/N NH 002993 Manufacture StefaniS.p.A. Italy Edge banding min / max 14-65mm Thickness min 0,3mm Max size of ABS 3 x 35mm Panel thickness min/ max 60mm Panel size 220- 3200mm Working edge 30-75mm Distance between the edges 400mm Adjustable feed speed from 6 to 36 m/min Units: 1+1 front milling units, 4 kW, pneumatic Dkjlimwjtrgy Nolbjl 1+1 air blast for cleaning the workpieces 1+1 gluing station / hot melt adhesive unit GR_HMP-P HM-P GLUING UNIT FOR STRAIGHT EDGES The device is designed for gluing straight edges using a thermo-meltable adhesive with a removable container container and a premelter for quick melting The unit includes A Glue container B Strip storage table C Pneumatic device box D Support base for strip storage E Guillotine shears F Side pusher G Inclination of the glue unit H Mobile table top 1+1 feeding device for edge trims, 5 stations 1+1 head cutting unit, 0.35 kW, 12,000 rpm 1+1 equalizing unit, 1 kW, 12,000 rpm 1+1 chamfer trimming unit, 0.5 kW, 12,000 rpm R14/R25, diameter 80 mm, 12,000 rpm 1+1 head rounding unit with two 0.35 kW motors 1+1 milling unit, 4 kW, right side, left side empty space ( U28+U55), diameter 125mm- RPM 12,000 1+1 Self-adjusting scraper RCA 95 1+1 Brush / buffing unit 0,29 kW, 1500 rpm SPO ( 150/50x 50mm ) 1+1 ABS strip color brightener, 1600 W

Condition: not inspected (used), Year of construction: 2004, Functionality: unexamined, HOMAG edgebanding and processing line, Dkjlimwlern Sl Iobel KF 61/08/QA/25 edgebanding machine, KF-63/08/QE/15 edgebanding machine, Optimat TDL 310/25/12 turntable, year of manufacture 2004, L=25 m

Condition: good (used), 1ST AND 2ND LINE EDGE SQUARING MACHINE WITH BRIDGE LOADING AND PANEL TURNER BIESSE BRAND STREAM SB2 MODEL, CE READY DELIVERY MIN/MAX PANEL HEIGHT MM. 10/60 MIN/MAX EDGE HEIGHT MM. 15/65 MIN/MAX EDGE THICKNESS MM. 0.3/3 MAX SOLID WOOD SECTION PANEL PROTRUDENCE FROM TRACK MM. 35 MIN. PANEL LENGTH MM. 240 MIN. PANEL WIDTH MM. 240 FEED SPEED PNEUMATIC CONNECTION COMPOSITION: SPINDLE MOULDER DOUBLE CHIPPING DEVICE GLUING UNIT YES EDGE HOLDER MAGAZINE WITH 6 POSITIONS ENDING UNIT YES OVERLAPPING UNIT CORNER UNIT 4-MOTOR ROUNDING UNIT SPINDLE MOULDER EDGE SCRAPING UNIT YES GLUE SCRAPING UNIT YES HAIRDRYER UNIT YES BRUSHING UNIT YES NC CONTROL 410 Djlimsvvcd Sswlbjkl RBO DOUBLE-STATION BRIDGE LOADER MODEL SELECTA C RBO FLAT PANEL TURNER MODEL GP

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: J10039A) Gantry-portal Loader (Double pick-up station) "MAHROS" Mod. Brush J10039B) 1st Double-side Sizing & Edge Bander "IDM" Mod. Activa SB 1/9900 Dkjlimohmkxqswlbel J10039C) In-feeding Rollerway "MAHROS" Mod._____ with 90° Turning device (from lengthwise to crosswise) with double cone system J10039D) 2nd Double-side Sizing & Edge Bander "STEFANI". Mod. Performance SB2 J10039E) 90° Converyor Translator "MAHROS", complete with motorised roller conveyor and 90° motorised belts to translate the panels to the MAHROS Unloader J10039F) Brush-cleaning machine "WANDRES" Mod. BI46/1/1300 J10039G) Gantry-portal Stacker (Double station) "MAHROS" Mod. Brush

Condition: used, Lot 1 squaring-edging line composed as follows: 1) "Easy Order" automatic feeder for longitudinal and transversal passage of panels * Automatic adjustment of the stops according to the size of the panel * Number of cycles / minute from 10 to 14 depending on the type of passage and size of the panel. The number of cycles / minute is minimal in the case in which panels with always different dimensions are worked * Workable dimensions for longitudinal passage: min 250 x 130 max 3000 x 1200 * Workable dimensions for cross passage: min 130 x 250 max 1200 x 3000 * Maximum panel weight: Kg 70 * Brushless motors 2) External milling machine for customized processing * Device for milling and removing material on the non-edged side of the panel * Ready for "Eco Power Pack" * N ° 1 motor 6,5Kw - 12000 rpm with vertical rotation axis * Pneumatic automatic vertical exclusion * Automatic lubrication of the guides 3) Bridge system for customized longitudinal and transversal machining * Automatic movement of the main guide on linear guides with Brusless motor * Automatic vertical exclusion of the main guide * Automatic lubrication of the guides * Max opening 3000 mm 4) "Watch" line supervisor with automation for handling and returning the panel to the operator * Numerical Control with PC Office Software with Windows 7 operating system * Barcode reader * Tele diagnosis * Supervision and control software for quick and easy management of the main functions of the squaring machine. * Realistic and descriptive interface that allows you to monitor the time and status of the squaring-edgebander. * Unlimited number of programs * Possibility of extrapolation of production reports 5) Manual loading station with automatic recognition of the size of the panels * N ° 3 air curtain benches (dim. 640 x 1600 mm each) for the positioning of the panels with roller conveyor for the progress of the same * Inclined and motorized introduction roller conveyor (dim. 2600 x 3200 mm) for the alignment of the panels on the guide principal * Main guide controlled by C.N. for alignment to the work line. * Barcode reader for automatic recognition of the dimensions of the introduced panel 6) Panel turner * Roller conveyor with 6 + 6 motorized rollers * Double plane group for rotation * Fully automatic motorized rotation controlled by encoder with adjustment by C.N. * Motorized roller conveyor at the exit of the squaring-edgebander 7) 90 ° translation station * N ° 2 transfers with rollers and belts (dim.1440 x 3200 mm and 1600 x 3200 mm) 8) 90 ° translation station * N ° 2 transfers with rollers and belts (dim.1440 x 3200 mm and 1600 x 3200 mm) 9) Rotation station for panels with a width greater than 1300mm * N ° 1 roller conveyor (dim.1280 x 2700 mm) 10) Transfer with 3 belt conveyors 11) 90 ° final translation station * N ° 1 transfer with rollers and belts (dim.1440 x 3200 mm) * N ° 1 transfer with rollers and belts (dim.1100 x 3200 mm) 12) Stefani Evolution SB One squad-edging machine * Numerical Control with PC Office Software with Windows operating system * DVD player * Tele diagnosis * Bar code reader with radiofrequency keyboard (with the possibility to customize the reading software and data entry) * Panel height 60 mm * Minimum panel width 90 mm * Maximum panel width 1600 mm * Variable feed speed 10 - 40 mt / min * Working height electronically adjustable by C.N. * AA anti-adhesive group * Double shredder group with electronic positioning Kw 5.8 + 5.8 * Rectifier unit wi... Delimwsvphxnjlbjkl

Year of construction: 1998, Condition: like new (used), double-sided machine for formatting the edge of the workpiece edge banding and finishing of various edge materials from the roll up to 3 mm edge thickness. Use as first machine in a machine line for longitudinal throughfeed. Fixed fence side left, moving side right. basic machine: - with continuous machine column - Glue roller drive at feed stop - Glue container lift at feed stop - Glue container clamping workpiece actuated. workpiece transport device: - rolling block link chain with ball bearings Delimwled A Ud Rsbskl - chain track with precise, hardened running and guiding surfaces - magnetic motor braking of the transport chain - infeed device with 3 inclined rollers - intermediate transport at the outlet 400 mm long. upper pressure: - with driven V-belt - motorized height adjustable width adjustment: - linear guide as well as rolling guides on hardened supports - motorized rapid/creep drive - ball screws and cardan drives for precise positioning - digital position display paint finish: - Homag textured paint gray RDS 240 80 05 Electrical equipment: - Operating voltage 380/400 V, 50/60 Hz - Control voltage 24 V - control cabinet mounted, installed according to Euronorm EN 60204 - electronic frequency converter with motor brake function - manual switch for setup mode Homatic electronic control NC21 control system Technical data: - Feed infinitely variable 10 - 32 m/min. - Workpiece protrusion fixed 30 mm - workpiece thickness 12 - 40 mm - Working height up to upper edge of chain 950 mm - Working width double-sided min. 240 mm - Working width double-sided max. 1.500 mm - edge material roll 0,3 - 3 mm - Edge cross-section max. - for PVC 135 mm2 - for veneer 100 mm2 - roller diameter max. 900 mm - ground conditions must correspond to the foundation plan Compact double hogger longitudinal 4,5 kW KD10 Free space for subsequent installation of a standard hogging unit controlled 4,5 kW Noise protection Format part Gluing part A3 Noise protection aggregate part basic length Workpiece protrusion adjustment automatic adjustment pressure zone Optimat Edge folding device Cross-cut unit HL81 chamfer/straight free space - 1.050 mm for cross-cut unit pre-milling unit 0,55 kW Free space 350 mm for pre-milling unit Milling unit 0.4 kW Milling unit 0,4 kW chamfer/radii autom. Universal milling unit 4 kW controlled fettling unit profile pneumatic adjustment fettling profile Edge heating white break Electronic width adjustment EB 02 Space requirement: length 6.650 mm x width 5.200 mm Total connected load: 72 kW Rated current: 125 A Total extraction capacity: 18,690 cbm/h Air speed: 35 m/sec. Compressed air consumption: 45 NI/cycle Machine is factory reconditioned, as new, warranty

Condition: used, Year of construction: 2000, Functionality: fully functional, Manufacturer: HOMAG Model: KFL 10/22/QE/CF Type: Double-side Sizing & Edge Banding machine Year: 2000 Status: Connected, test possible. Location Lithuania Basic machine Workpiece thickness 12...60 mm Workpiece width 70... mm Workpiece overhang to transport chain 40 mm Feed 10...40 m/min Power consumption Main drive 3...75 kW Height adjustment 0,2 kW Dkelouggpzeimwlbjl Machine main drive Feed 6...30 m/min Power draw 2,2...6,9 kW Gluing unit Edging type: Straight and softforming edges Edging material height 16...65 mm Workpiece feed max. 60 m/min Contour, trimming unit CF/CS 10/11/12 Discharge valve HMA 1 Melting unit HMG 12-1x1-M-HO Gluing section for preformed parts Type of edge Straight edges drum profiles Edge material Belt from roll Snipping unit for profile parts WK 46 Saw blade (diameter 80 mm, cutting width 3.2 mm, drill hole 34 mm, number of teeth 20) Flush-trimming unit and scraping unit for performed parts Buffing unit for performed parts Specification, layout on request

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Djlimolikydowlbjkl Hogging Units KD 11 (2 x Kw 8,1) hydro EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: used, Double squaring edgebander usable in line or off line as first or second machine CNI control on separate electrical cabinet Machine suitable for 1st + 2nd passage of the panel Dkslimwlskvrxqsbjl Mobile shoulder opening motorized by N.C. mm 3200 Maximum panel width mm 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Distance between the retractable pins mm 500 Squaring part composed of (for each side): Rectifier unit with two motors Edging part made up of (for each side): Gluing unit with premelter for EVA glue Edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit Staggered gleaning unit with two motors Rounding unit with 4 motors 0-90° inclinable spindle moulder unit Edge scraper group Brush group

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) option: mm 20 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 250 / 3000 (ca.) Adjustable feeding speed (m/min) 12 - 40 m/min (ca.) Safety sound-proof enclosures/cabins Distance (center-axes) of Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Dkslimok Nk R Dswlbsl Anti-chipping Milling Unit (1 x Kw 4 (ca.)) Hogging Units (2 x Kw 5,8 (ca.)) Milling-Shaping unit 1 x Kw 4 (ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) Edge coils support (No 2 reels) + Band Pressure zone Snipping (end-cutting) unit (2 x Kw 0,35) ca. Rough Trimming unit (2 x Kw 1) ca. Fine Trimming unit (2 x Kw 0,5 ca.) 0°-30° Multi Function Unit (Profile contour Trimming unit) with 2 revolvers (8+8 folds) - max 27 m/min Milling grooving unit 1 x Kw 4 (ca.) (0° - 90°) Profile Scraping unit + Glue scraping unit + Buffing unit

Condition: used, Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Machine suitable for 1st + 2nd pass of the panel Opening of the mobile shoulder motorized by C.N. mm 3000 Panel height 60 mm Pvc/Abs mm 3 Continuously variable feed speed from C.N. (up to 40 m/min) Working height electronically adjustable by C.N. (up to 60 mm) Opening of the moving shoulder electronically adjustable by C.N. Motorized rubber belt with higher pressure Track with bearings with hidden pins - distance between PINS mm 500 Automatic system for supporting large panels Anti-adhesive group Part to be squared composed of (for each side): * Automatic timed anti-splinter group * Double shredder group * Two-motor grinding group Border part composed of (for each side): * Gluing unit for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. * 6-position reel magazine with automatic edge change by C.N. * End trimming unit with 2 motors with automatic inclination * Overlapping trimming group with 2 motors * Edge trimming group with 2 tilting motors electronically adjustable by C.N. Dkeliju Rim Hsmwlbjl * Multifunction rounding unit with 4 motors (cornering tool + rounding tool) with numerical control adjustment automatically * Toupie Group (with 2 motors on the fixed left side \ with 1 0-90° tilting motor on the mobile right side) * Electronically controlled edge scraper group by C.N. * Glue scraper group * Oscillating brush group * Phon group

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Dkslimsd Nt Rqowlbol Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

Condition: used, Year of construction: 2017, TECHNICAL SPECIFICATIONS General specifications for the squaring and edgebanding line MAIN FEATURES: · Automatic loading and unloading of panels in stacks; · Automatic evacuation of service panels upon loading · Automatic management of service panels / pallets upon unloading; · Possibility of manual loading/unloading of panels for special needs (e.g. revisions, urgent pieces, etc.); · Longitudinal and transversal squaring and/or edging; · Execution of blind and/or through milling in the longitudinal and/or transversal direction · Possibility of quality control with operator first panel of each batch after SQB 2; The operator must enable the 1st piece quality control mode on the SPV before processing of each batch: The supervisor commands the entry of a single panel into SQB1 + SQB2 which will stop on output belt conveyor to SQB2 for quality control by the operator. Dslioulqbmemwlbekl If the panel is to be discarded, the operator presses the appropriate “DISCLAIM” button and the supervisor brings in a second test panel. If the panel is good, the operator puts the panel back on the belt conveyor and launches the production with a specific button. Random quality control It will be possible to activate this function by means of a supervisor. Given a number of panels settable, one will be extracted from the quality control line, to allow the extraction will create a gap between the panels of approximately 10/12 seconds. The panel can be reintroduced into work at the end of the job by pressing the appropriate button. Provide a button for starting the edging process from the keypad on the quality control station and from keypad on SQB1 TYPES OF PANELS THAT CAN BE WORKED: · Chipboard / MDF panels; Raw panels with a density greater than 650 kg/m3, honeycomb panels with a perimeter frame of at least 30mm thickness and already squared, without protruding veneer. · Covering / edges: or melamine, CPL, HPL (no protruding coating on the incoming panels); o Matt surfaces/edges: For matt, glossy and film edges please refer to samples provided by the customer. · The panels being processed must have edges with straight sections of a minimum height compatible with the height and position of the guides and copiers of the machine working groups and line automation (no inclined sections and/or small thickness swings, etc.); · The quality of the processing of any milling operations carried out on the 2nd line is not guaranteed with intervention of a single router (possible chipping or breaking of the edges); · Straight or inclined milling must be compatible with the maximum removal, the cutting edge work and the overall dimensions of the spindle moulder groups of the squaring and edgebanding machines; · Any panels with particular characteristics (e.g. milling, slots, large notches, etc.) will have to be tested beforehand on the line to verify their possibility and quality of processing; · Other characteristics of the processes according to the specifications of the individual machines; TYPE OF EDGES AND MAIN PROCESSING CHARACTERISTICS: · Removal in squaring longitudinal/transverse (from each side): max. 500 mm2, with excess material in width from 1 to 10 mm; · Panel protrusion from the edgebanding machine track (on each side): or 1st line: electronically variable by control from 35

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 Working width (min/max) mm 236 / 1300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 / 50 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling Unit (vertical Joint Trimmers) 08. 0555 max. 3° (2 x 1 kW) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 6 Rough Trimming unit 08. 0555 (2 x 1 kW) max. 3° Fine Trimming unit 08. 055 (2 x 0,66 kW) 30° + 30 m/min Glue scraping unit 08.517 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0,18 kW) Free space Delimedh Tfgowlbjkl

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit FK rounding unit Edge scraper unit Glue scraper group Dslimwljpp Tkfebskl Brush group Anti-adhesive group

Condition: excellent (used), 4-SIDES LINE of Double-side Sizing and Edge Banding. Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: Dkjlimwoiztxyjlbel KZ0400a) Infeed table "HOMAG" Mod. TBL 100/25/12/S with motorized rollers Adjustable feeding speed 7-40 m/min KZ0400b) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 325/M1/C Adjustable feeding speed 15-40 m/min - with PC 22 SIZING: Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Grooving Unit UF11 (Kw 4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) KZ0400c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) Adjustable feeding speed 20-60 m/min KZ0400d) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 326/M2/C Adjustable feeding speed 15-32 m/min - with PC 22 SIZING: Anti-chipping (1xKw 4,5), Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: End-trimming HL84 (2xKw 0.22), Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Contour Trimming (Corner rounding) FF32 (4 x Kw 0.4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) MINIMUM EDGE LENGTH 70 MM (Part thickness for narrow parts max. 25 mm, Edge thickness max. 2 mm, Cycle speed: max. 20 T/min, Feed rate max. 20 m/min.)

Condition: used, Year of construction: 2013, Numerical control PC Office with Widge Plus software Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Panel width min - max mm 215 - 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Pin height 12 - 18 - 25 mm Distance between the retractable pins mm 500 \ 400 Working groups mounted on NC motorized overtables Squaring part composed of (for each side): Anti-adhesive group Timed automatic anti-splinter group Double Hogger group Edging part composed of (for each side): Gluing unit with pre-melter for PUR glue and pre-melter for EVA glue Edge pressure rollers electronically controlled by N.C. Edge holder magazine with 6 positions Dkelimwlsk Egvdobel End Cutting unit with two motors Rough trimming unit with 2 motors Fine trimming unit with 2 motors electronically controlled by NC Rounding unit with 4 motors 0-90° tilting grooving group electronically controlled by CN (movable shoulder 0-90° tilting grooving group + double superimposed grooving unit (fixed shoulder) Anti-adhesive groups Edge scraper unit Glue scraping unit Brush group Phon group

Condition: excellent (used), 4-SIDE EDGE BANDING LINE with PC53 PowerTouch Line Control: Workable workpieces dimensions: MIN. mm 195 x 250 x 8 / MAX. mm 1200 x 2500 x 60 W12051a) Infeed table "HOMAG" Mod. TBL 100/25/12/S with motorized rollers W12051b) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFL 526/10/A3/15 Dkeliovnrm Tomwlbol W12051c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) W12051d) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. KFL 526/10/A3/25

Condition: used, Numerical Control with NC 410 Software Machine suitable for 1st pass of the panel Motorized mobile shoulder opening by C.N. 1500mm Dkoliorxzb Uemwlbsl Panel height 60 mm PVC/Abs mm 3 Continuously variable feed speed Working height adjustable electronically by C.N. Motorized rubberized belt with superior pressure Squaring part composed of (for each side): * Double shredder group * Automatic timed anti-splinter unit Beading part composed of (for each side): * Gluing group for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with adjustable pressure rollers * 2-position reel magazine with automatic edge change * Overlapping trimming group with 2 motors * Gleaning unit with 2 tilting motors * Moulder group tiltable 0-90 ° * Edge scraper assembly * Glue scraper unit * Belt sander assembly * Brush group