Double side squaring edgebander

Biesse Stream SB1 7.5

Condition: used, machine/vehicle number: 007641, Type of edging: Thin edge, Thick edge, Solid wood Hnjdpfx Afswuz R Hebjk Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Operating Units Right Side: 8 nr Operating Units Left Side: 9 nr

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 Hjdjgwbbqepfx Afbsnk N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Hnjdpfxohvahhj Afbok Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,65 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Milling grooving Unit 2 x FB 30 (Kw 5 x 2) 0 - 90° Profile Scraping unit (Multi-profile, by N.C.) RBK - 503 (2 POSITIONS) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), 4-SIDES LINE of Double-side Sizing and Edge Banding. Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: KZ0400a) Infeed table "HOMAG" Mod. TBL 100/25/12/S with motorized rollers Adjustable feeding speed 7-40 m/min KZ0400b) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 325/M1/C Adjustable feeding speed 15-40 m/min - with PC 22 SIZING: Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Grooving Unit UF11 (Kw 4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) KZ0400c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) Adjustable feeding speed 20-60 m/min KZ0400d) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 326/M2/C Hnjdpoiztxyjfx Afbjk Adjustable feeding speed 15-32 m/min - with PC 22 SIZING: Anti-chipping (1xKw 4,5), Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: End-trimming HL84 (2xKw 0.22), Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Contour Trimming (Corner rounding) FF32 (4 x Kw 0.4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) MINIMUM EDGE LENGTH 70 MM (Part thickness for narrow parts max. 25 mm, Edge thickness max. 2 mm, Cycle speed: max. 20 T/min, Feed rate max. 20 m/min.)

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Transport belt to evacute chips (wastes) Hnodpfx Ajidqf Rsfbok Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Hnodjx Aqi Ejpfx Afbek Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) N° 6+6 (total 12) horizontal drilling spindles in Y-axe N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)