Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Length: mm Width: mm Iiedpox S Dxbjfx Ached Height: mm Machine weight: kg Standard configuration Extended machine accessories

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Iijdpfxen Smbrs Ached Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Control panel base - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve Iedpen Smclofx Achsid - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: used, Year of construction: 2008, working width / mm workpiece height / mm / Workpiece thickness: 1-70 mm Min. workpiece length: 350 mm Min. workpiece length with magnetic or vacuum track: 80 mm Band filter unit volume Ab=900 approx. 350 l Band filter unit volume Ab=1400 approx. 400 l Working height constant 1000 mm Feed speed 2/4 m/min Feed speed stepless 1.5-8 m/min Iodpfxoinwwze Acheid Operating voltage 400 VAC Control voltage 24 V DC, 230 VAC Frequency 50Hz Compressed air connection R 3/8" Minimum compressed air pressure 5 bar Minimum compressed air volume EMSN II +2F 10 NI/min Minimum compressed air quantity EMSN II /L +2F 80 NI/min Overall electrical connection See installation plan Weight of the machine working width 900 mm approx. 4200 kg Weight of the machine working width 1400 mm approx. 5100 kg Weight of the machine working width 1540 mm approx. 5600 kg Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide SERIOUS Automatic sheet metal deburring machine with wet grinding device Type EM 5 N/II/L + 2 F 1400 Year of construction 2008 Factory - No. 780063 Machine/Equipment: Sheet metal deburring machine using the wet ship process for stamping, laser and nipple parts of different materials with flexible grinding roller, as well as 2 flap brushes for particularly high edge rounding and 2 Spring steel brushes for oxide removal (worn out) The machine is equipped with a continuous conveyor belt for the Workpiece transport equipped. Effective working width: 1380mm Minimum workpiece length: 350mm Special equipment: •Vacuum suction system 300mm wide, for non-magnetic small parts Minimum length of 80mm, with a minimum area of ??200cm² •Magnet track 300mm wide Minimum length of 80mm, with a minimum area of ??40cm² •Frequency converter for stepless feed & speed regulation •various Abrasives as accessories

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Working height: variable from 0,5mm – 150mm adjustable Working width: 1150 mm Maximum part weight: 300 kg Wide belts with abrasive belt unwinding: 2200 mm As standard with vacuum hold system, optional with magnetic hold system Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Iedpfxem Nlm Ds Achoid Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new Iisdponah Tajfx Achsd The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Machine is suitable for heavy-duty use. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belts with abrasive belt unwinding: 3250 mm As standard with vacuum hold system, optional with magnetic hold system By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or Iisdpfx Aconah Tdohsd *

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or * Iiodom Rpy Rjpfx Achod

Condition: new, Year of construction: 2026, High-performance deburring machine for simultaneous internal and external deburring of profiles and pipes in a single operation (approx. 3 seconds). Powerful industrial gear three-phase motor with frequency control, allowing stepless speed adjustment: 600 – 2,700 rpm. Designed for deburring pipes and profiles with material dimensions (horizontal/vertical) up to 120 mm. Easily adjustable working table height (adjustable and lockable) to match the required material size. Adjustable, lockable feed (carriage) of the deburring brushes to the working table via hand wheel with locking function. Drawer for dust residue collection. Sheet steel housing prepared for connection to an external extraction system. Folding covers for easy brush changeover. Machine body color: RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm crimped steel wire. Ijdenvfl Ajpfx Acheid Power cable with CEE plug. Operating tools included. 12 months warranty for single-shift operation. Working height: 1050 mm Speed: 600 – 2700 rpm Weight: 410 kg Machine dimensions: 680 x 1200 x 1380 mm Power: 3 kW Electrical connection (V/Hz): 400/50 Brush diameter: 250 mm Standard brush width: 60 mm. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL FLOTT PRODUCT RANGE! REQUEST AN OFFER TODAY!

Condition: good (used), Year of construction: 2005, working width: 1,000 mm, Deburring machine Fab. LISSMAC Typ. SBM-B 1000 Year 2005 Technical data Make: LISSMAC Type: SBM-B 1000 Year of construction: 2005 Passage width: 1000 mm Sheet thickness: max. 20 mm Sheet size min. length: 150 mm Sheet size min. width: 100 mm Speed: 1400 rpm Brush motor power: 4 x 7.5 kW Dimensions: approx. L 2.20 x W 1.50 x H 1.50 m Weight: approx. 1.5 t Equipment - Automatic material feed-through - Infinitely variable feed rate 0-10 m/min - Sheet thickness adjustment: Hand crank with worm gear and scale, infinitely variable Iijdpfx Acsvgb Hgohsd - Brush depth adjustment: Hand crank with worm gear and scale, infinitely variable - Various accessories - Operating instructions All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Brush diameter: 250 mm Brush width: 25 - 60 mm Ijdpsxpqy Rjfx Acheid Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Good condition

Condition: new, Year of construction: 2026, max. working width: 1330 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 18 m / s Iedpfoygx A Aox Achjid Number of roller-brush planetary revolution shaft heads: 8 pcs. machine thickness servo adjustment precision: 0,01 mm Length: 4200 mm Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Electrical connected load: 89 kW Standard configuration Machine configuration:1st station: Sanding belt2nd station: Brush elementsOptional 3rd station: Sanding belt or polishing station Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Machine with wet vacuum cleaner Extended machine accessories

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 153200 € 2895.48 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure Isdpfx Aoynmw Rjchsid * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 74000 € 1398.6 € 1350 mm 0,5 - 170 mm 1370 x 2200 mm 4000 m³/h 200 mm 6 bar 78 (+/-2) dB 1750 mm 2100 mm 2180 mm 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 180 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/s 10 Grinding belt speed m/s 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 10rotating clockwise and 10counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 20 Oscillation stroke mm 15 Rotation motor power kW 5,5 Revs 1/min 300 - 1000 Oscillation motor power kW 0,37 Grinding brush speed m/s 10,0 ACCESSORIES: B Group - External barrel brush Ø 150 mm Iiodoynmwkepfx Achod with Scotch Brite Brush € 5.580,00 with Wire Brush 0,3 mm € 5.900,00 R GROUP - GRINDING BELT Motor 15 kW € 1.060,00 OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1.290,00 Conveyor belt with vacuum system - 3,0 kW - 300 mm wide € 4.780,00 2 additional PVC coated rollers on infeed and outfeed side € 2.040,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4.510,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 4.030,00 magnetic conveying system - 2 groups, 200 x 200 mm € 13.520,00 Demagnetiser € 4.940,00 THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H.

Condition: new, Aceti Edge Milling Machine, Model 61 A stable, robust edge milling machine for milling visible and weld edges. Chamfer adjustment via handwheel and scale. Table hardened, with clamping, 500 mm long. Axial adjustment of the milling table for full utilization of ISO/DIN indexable inserts. Suitable for all materials, including plastics, by using different indexable inserts. Standard accessories: - Milling head, fully equipped with 10 ISO indexable inserts - Hardened, axially adjustable guides - Chamfer adjustment via handwheel with locking mechanism - Angle adjustment via circular guide, 15-45° - Table design with 4 rubber feet Technical data: Motor: 400 V, 1.1 kW Iisdpfjiwxwtox Achod Speed: 2800 rpm Milling table: 500 x 100 mm Milling cutter: 80 mm Chamfer: 0 – 6 mm Angle: 15 – 45° Weight: 35 kg Incl. 10 pcs. indexable inserts SPUN 1203

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. Iijdpfx Aceyt Nm Ejhsd The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. You can view this machine in our showroom in Bergeijk. Ijdpfx Aoyt Nhvechsid

Year of construction: 2014, condition: ready for operation (used), A Rausch robot-based deburring machine is available. Support height: 1050mm, spindle speed: 50000rpm, power: 1kW, max. burr thickness: 0.2mm, max. workpiece diameter: 500mm, gear types: straight/helical/angled, max. helix angle: 40°, max. chamfer angle: 45°, max. workpiece length over chuck: 450mm, max. workpiece weight: 50kg. Machine dimensions X/Y/Z: approx. 2050mm/1200mm/2100mm, weight: approx. 1300kg, operating hours: 1271h, utilization time: approx. 8h. Documentation available. An on-site inspection is possible. Iijdpfeyxq Uisx Achod

Condition: excellent (used), functionality: fully functional, Enhanced finishing solution for metal 3D printed components Iijdev Awrwopfx Achsd EXTRUDE HONE technology opens the door to a very economical, fast, controllable, flexible, and environmentally friendly process for enhanced surface finishing of metal 3D-printed parts. We have a used machine in stock for immediate delivery. This machine has only been used briefly and is in excellent condition. FEATURES and BENEFITS + Efficiency in enhanced surface finishing. Material removal rate (μm/min) faster than other methods on the market; e. g. up to 3 times faster than electro-polishing. + Tooling out of the printer. Tooling and fixtures are built at a reasonable cost since they are 3D-printed. + Highest flexibility. We provide a complete & optimized cathode and fixture design for your components within two working days. + Multiple material master packages Specific parameter files per alloy family. + EXTRUDE HONE Connect From CAD to part, remotely: loading of parameters, upgrading material packages, software, and maintenance. + Make it easy. The all-new and simple operating concept limits the data input to 4 simple parameters – parameters everybody understands.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 2,150 mm, total width: 1,805 mm, total height: 2,320 mm, overall weight: 2,850 kg, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This machine is as good as new, has only been displayed in the showroom and has been used as a demo model. F800 – All-round finishing machine Discover the advanced F800 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programmes, ensuring high reproducibility of product quality and minimising operating errors. Depending on the materials to be processed, you can choose a system with vacuum or magnetic support. On the input side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating cup brushes that exert light pressure. The brushes ensure uniform rounding of all edges and holes, both around and inside the flat-ground product, resulting in the most optimal finish. The F800 offers automatic brush calibration options that ensure consistent precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future! Iiedpfx Acex Uz Ilshjd

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. Iijdpfxjhnc E Ae Achod We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, overall weight: 5,200 kg, input current: 95 A, ERNST Neptun EBB 1500 is a deburring machine designed for sheet metal processing, used for cleaning and rounding the edges of parts cut by laser, punching, or flame cutting. This machine enables alternating processing of various materials such as steel sheets, aluminum, galvanized steel, or materials with protective film, thanks to its flexible deburring roller and brush set. Key features of the ERNST Neptun EBB 1500: • Versatility: Iisdpfx Acjxmhxxshed Processes parts made from different materials without the need for constant abrasive changes. • Functionality: Uses a flexible deburring roller and a set of brushes (steel or flap brushes) for deburring or edge rounding. • Precision: Allows for the achievement of an identical and uniform radius on all edges. • Ideal solution for: Companies working with diverse materials where edge processing after cutting is required.

Year of construction: 1979, condition: not inspected (used), Hurth ZEA1 Gear Deburring Machine -WKG 475- Offered here is a gear deburring machine from the company Hurth. Technical data: Manufacturer: Hurth Type: ZEA1 Year of manufacture: 1979 Iedpshg Nuijfx Acheid Adjustability of the machining unit: 150mm tool outer diameter: 190-205mm workpiece outer diameter: 20-120mm workpiece length: 150mm Toothing width: 50mm Module for chamfering: 1-4mm chamfer width: 0,7mm Weight: 2t

Condition: used, Year of construction: 2016, operating hours: 851 h, functionality: fully functional, machine/vehicle number: MN25724, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 50 mm, total length: 1,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 2,600 kg, working height: 950 mm, workpiece height (max.): 50 mm, workpiece width (max.): 1,500 mm, The ER 1500 E is a deburring machine working from above on one side with the EdgeRacer carousel for precise processing of inner and outer contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of more than 300 m²/h, surface-friendly processing - even with polished, brushed and foil-coated sheets - and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the sanding heads can also be fed below roller table level. The roller transport also ensures maximum energy efficiency - the processing costs are usually less than €0.01 per square meter of processed sheet metal. Thanks to the reversing operation, the sheets to be processed can be inserted and removed on the infeed side. Purchase the EdgeRacer deburring machine ER 1500 E as a demonstration machine with only 851 operating hours directly from the manufacturer. Iodpfsucw Dzox Achoid

Condition: new, Year of construction: 2025, machine/vehicle number: ZGS200, 200 l Capacity Iiodew Hb Tfopfx Ached * 7.5 kW high-performance three-phase drive motor. * Adjustable speed control up to 300 rpm. * Control panel and dosing pump included. - The dosing pump automatically adds the chemical to the tank * Working hours timer * PLC panel programmable on request * PU or INOX plate * Replaceable valve for wastewater drainage. * Inner tank features channels and cavities to ensure a non-stick wall.