Horizontal machining center

WMW HECKERT CWK 400 D

Condition: used, Year of construction: 2002, x-travel 650 mm y-travel 650 mm Crsdpfxszmy Tuj Ab Uef z-travel 650 mm Control Siemens 840 D weight of the machine ca. 12 t

Condition: excellent (used), Year of construction: 2005, Machining center CWK 400 Year of manufacture: 2005 X travel: 650 mm Y travel: 650 mm Z travel: 650 mm Rotary table (4th axis) CNC: Siemens Sinumerik 840 D Table length: 400 mm Table width: 400 mm Workpiece weight: 400 kg Operating hours: 42,000 h Tool changer chain magazine: 80 tools, HSK 63 2-pallet pool Cjdpewpciajfx Ab Uerf Weiss motor spindle: 36 kW, 18,000 rpm Accessories and 60 tools included

Condition: defective spare-parts repository (used), Year of construction: 2002, operating hours: 34,188 h, functionality: not functional, machine/vehicle number: 18455, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, nominal power (apparent): 65 kVA, torque: 200 Nm, controller manufacturer: Siemens, workpiece height (max.): 750 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 500 kg, total height: 2,700 mm, total length: 4,700 mm, total width: 3,400 mm, table width: 500 mm, table length: 400 mm, table load: 500 kg, rotational speed (max.): 25 rpm, overall weight: 12,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 2,801 h, number of spindles: 1, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, For sale is a horizontal CNC machining center, HECKERT CWK 400 D. Crodpfxszb Hfbj Ab Usf The machine is currently not functional and is therefore explicitly offered as defective / for spare parts / for refurbishment. Manufacturer: Starrag Heckert Type: CWK 400 D Control system: Siemens Sinumerik 840D Axes: 4 axes (X/Y/Z + B-axis) Pallet changer available Spindle with only 2,801 operating hours → very good basis for repair Pallet pool with a total of 23 pallets: 15 pallets with threads 8 pallets with grooves Machine is still connected to the power supply → inspection under power is possible Coolant system / chip conveyor / typical equipment available (machine-dependent) Immediately available Buyer is expected to dismantle the machine themselves Loading can be supported upon agreement Due to the condition, the sale is made without warranty or the possibility of return. Inspection is strongly recommended.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 18275, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine from the production of highly precise components for CNC rotary tables. Not a job shop machine. TECHNICAL DETAILS Crsdpfx Ajy Rmz Asb Uof Travel in X-axis: 650 mm Travel in Y-axis: 650 mm Travel in Z-axis: 650 mm C-axis: 360°/continuous High-speed spindle speed max.: 10,000 rpm Spindle taper: HSK-A63 Internal tool cooling possible Number of tool magazine positions: 120 Circular accuracy: 5 µm MACHINE DETAILS Control system: Siemens Sinumerik 840D Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Dual pallet changer + storage tower with 6 positions for up to 8 pallets Note: The machine has been shut down by a qualified electrician and professionally prepared for transport.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 41,150 h, travel distance X-axis: 650 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,500 W, number of slots in tool magazine: 80, number of axes: 4, This 4-axis Starrag Heckert HEC 400 D was manufactured in 2012. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 80 tools, allowing for efficient machining operations. The machine includes two workpiece pallets with a size of 400 × 500 mm. If you are looking to get high-quality machining capabilities, consider the Starrag Heckert HEC 400 D horizontal machining centre we have for sale. Contact us for further details. • Temperature range: 5–35 °C • Operating hours: 41,150 hours • NCU type: NCU 710.2 • NC software version: V02.07.01.06 • MMC software: 07.06.02.02 • Standard software cycles: 07.05.11 • Tool magazine type: Chain magazine • Workpiece pallets: 2 • Pallet size: 400 × 500 mm • Spindle torque: 200 Nm • Coolant pressure (option): up to 80 bar • Coolant tank capacity: 1350 l • Coolant flow (swivel shower): approx. 70 l/min • Axis measurement system: Heidenhain LC483 • Rotary axis measurement: Heidenhain RCN226 • Position frequency analysis X-axis: 29 Hz • Position frequency analysis Y-axis: 54 Hz • Position frequency analysis Z-axis: 52 Hz • Spindle + motor replaced: July 2025 Additional equipment Crjdpfx Aboyzn Dge Usf • Vapour extractor: AFS 600 Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 18234, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine from the production line for highly precise components for CNC rotary tables. Not a custom-made machine. TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 650 mm C-axis: 360° / continuous High-speed spindle speed max.: 15,000 rpm Spindle connection: HSK-A63 Internal tool cooling possible Number of tool magazine positions: 120 Circular accuracy: 5 µm MACHINE DETAILS Control system: Siemens Sinumerik 840D Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Dual pallet changer Csdoy Rmnvspfx Ab Usrf Note: The machine was shut down by a qualified electrician and professionally prepared for transport.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, controller model: Siemens 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 650 mm B-axis: 360,000 x 0.001 mm Cjdpoymw S Aofx Ab Uorf Pallet size: 400 x 500 mm Spindle speed: 50 – 10,000 rpm Tool holding system: SK 40 Number of tools in magazine: 60 Rapid traverse: 40 m/min Feed rate: 1 – 20,000 mm/min MACHINE DETAILS Control system: Siemens 840 D Power requirement: 65 kW

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: VDI 40, number of slots in tool magazine: 36, Additional equipment: 4th axis IKZ (internal coolant supply) with 40 bar Swivel head with 1° increment 3D wireless probe Cedpfx Absx Sv A So Ujrf

Condition: good (used), Year of construction: 2002, Alup Credpfx Abjwld Uvs Ujf SCK 52-10 Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped. Discharge pressure: 10.00 bar Motor power: 37.00 kW Free air delivery: 5.15 m³/min