Internal grinder

VOUMARD 6A

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm Ijdez N Amepfx Ad Nsht cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: new, filling capacity 300 kg max. workpiece height 500 x 200 x 20 mm workpiece weight total 200 kg max. workpiece weight 15 kg / Stck. revolutions per minute 22 U/min filling amount 40-50 % Colour blau 5015 RAL 0 625 x 270 mm total power requirement 1,5 kW weight of the machine ca. 650 kg range L-W-H 1 x 1,7 x 1,29 mm New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and Iedpfju Uu T Rsx Ad Noht corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included in the price). This are available from Sideros. Sideros ECO dust extraction available at extra cost. The manufacturer recommends taking 100 kg samples of the material to be deburred to be sent to the factory in Italy for test purposes before ordering. Machine dealer with own stock of 1600 m².

Condition: used, Seriennummer: 0419 Ihjdswm Rrdepfx Ad Nst

Year of construction: 1987, condition: ready for operation (used), Workpiece diameter: 10-350mm, max. grinding length: 660mm, clamping length: 1055mm, max. module: 25mm, swivel angle: +/-60°, grinding wheel dimensions: 300-500x100mm, with Faudi cooling lubricant belt filter and Elbaron oil mist separator. No longer fit for operation and can only be used as a basis for a complete overhaul. Ihjdpfxergah Ho Ad Net

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, 1 internal and surface grinding machine Manufacturer: WEMA Glauchau Model: SI 6/2 ALS PC x 710 Year of manufacture: 1985 Grinding depth: 710 mm Table travel: 1120 mm Grinding diameter: 40–400 mm Ihjdpfx Adjw Dtfbs Net Weight: 9.1 t

Condition: used, Year of construction: 2009, internal diameter max. 600 mm grinding depth max. 800 mm grinding length max. 600 mm control Siemens 840 D grinding diameter - internal max. 600 mm grinding diameter - cylindrical max. 800 mm workpiece length - max. 380 mm external grinding length max. 600 mm travel - x1 axis 150 mm travel - z1 axis 1100 mm travel - x2 axis 470 mm travel - z2 axis 800 mm workpiece spindle 8,5 kW turning speed range - stepless 1-795 U/min Equipment / Accessories: Workpiece spindle unit (U/B1/L adjustment): - Travel (U-axis): 300 mm - Swivel angle (B1 axis): -0,5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Set-up speed (jogging): 10 rpm - Spindle head size A 8 according to DIN 55026 - Through-hole 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (overhung clamping) max. 800 mm - Workpiece length (clamped between centers) max. 800 mm - Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): - Travel (Z1 axis): 1100 mm - Travel (X1 axis): 150 mm - Swivel angle (B2 axis): 270° - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Drive power of the internal grinding spindles (infinitely variable) Belt-driven grinding spindles: 7.5 kW - Grinding block mounting hole (diameter): 100 mm / 125 mm - Mounting length of sanding block: 220 mm - Sanding diameter: max. 600 mm - Sanding depth: max. 800 mm External and surface sanding device (Z2/X2): - Travel (Z2 axis): 800 mm - Travel distance (X2 axis): 470 mm Ihodpowp S Tnefx Ad Njt - Swivel angle (B2 axis): 270° - Drive power of the external grinding spindles: 7.5 kW - Grinding block mounting hole: Ø 140 mm - Sanding diameter: max. 800 mm - Sanding length max. 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 380078, overall weight: 13,500 kg, grinding diameter: 600 mm, center width: 1,100 mm, Equipment: rotational speed infinitely variable, Universal cylindrical grinding machine WEMA Glauchau SU 6-R – Year of manufacture 2014 Universal cylindrical grinding machine for internal, external, face, and taper grinding Universal cylindrical grinding machine SU 6-R by Werkzeugmaschinenfabrik Glauchau GmbH, year 2014, delivered on 28.02.2014. The machine is in well-maintained, ready-to-operate condition and is offered complete with a wide range of internal and external grinding spindles, filtration system, coolant unit, and accessories. Accessories & Clamping equipment: - Magnetic chucks (various diameters) - Workpiece holders - Grinding wheels in various sizes - Clamping devices - Spare and wear parts package - Measuring equipment (e.g., precision measuring device in cabinet) - Grinding wheel flanges - Tool holders - Various replacement filter rolls Condition: - Machine currently installed - Fully functional, regularly used - Interior well-kept, grinding area clean - Control, handwheel, and panel without visible damage - Accessories complete and neatly arranged - Viewing possible by arrangement Control: Siemens Sinumerik 840D sl, OP010C, 26.4 cm color display Operator PC: PCU 50.5-C, WinXP-based 40 GB hard drive, 12 GB available for applications Workshop-oriented programming (WOP) operating system Software status according to documentation: NC: V 02.07 SP3 HF10 HMI: V 07.06 SP2 HF7 11 axes according to configuration (HMI/NCK enabled) Space requirements: Machine: approx. 5000 x 4000 mm (L x W) Cooling unit: 3000 x 1200 mm (L x W) Working area Max. swing diameter: 650 mm Grinding diameter: internal 600 mm, external 650 mm Max. grinding length: 600 mm Center distance (external grinding): 1100 mm Max. workpiece weight (between centers): 150 kg Workpiece spindle head Internal clearance: 58.5 mm Speed range: 1–795 rpm Spindle nose DIN 55026 A8 Isdpfx Adjx Ekcmj Neht Swiveling mechanism B1-axis: −1° to +12° U-axis travel: 300 mm Slides & Grinding units X2-axis travel: max. 470 mm Z2-axis travel: max. 800 mm Table stroke Z1-axis: 800 mm Internal and external grinding spindles: Internal (B2-axis, spindle turret) 1 spindle turret with stepless angle adjustment (1/1000°) Mounting for 2 internal grinding spindles Quick-change mechanism Supplied spindles: SFIV 60×315, hybrid bearings, approx. 38,000 rpm SPV 100×315, HSK-C50, approx. 16,000 rpm SSA 100×400, flange Ø140–250 mm, up to approx. 200 mm depth Internal grinding spindle 7.5 kW, 2,000–7,000 rpm (with Sinamics) External grinding unit 45° Wheel diameter: Ø600×50×Ø203.2 mm Grinding wheel silicon carbide, centrally guided Automatic balancing system (vibration sensor, control unit) Filtration system REBER compact belt filter, Type 13-P90131 Paper belt filter Magnetic tape separator Geared motors, fully functional Drain trough & sludge box included 4.2 Oil / Coolant chiller Hyfra TRK30-EF, year 2013 Cooling capacity: 4000 W / 37 °C Refrigerant: R134a 3/PE 400 V, 7.2 A 4.3 Recooler Hyfra Chilly 35, year 2013 Cooling capacity approx. 2.2–3.9 kW Refrigerant: R407c 4.4 Sight window Visiport VP220, rotating sight window