Various valve

Verschiedene Ventil

Condition: ready for operation (used), Used Machine Injection Moulding Machine Gjdsu Ti Srepfx Anxobn Manufacturer: Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, immediately available Inspection possible by appointment The machine is no longer powered / No coolant connection The machine is professionally stored Technical Data: Clamping force (kN): 800 kN Platen size (mm): 610×610 Tie bar spacing (mm): Daylight opening (mm): 250 Max. (mould) open daylight (mm): 750 Control unit: MC4 Screen text language: German (cannot be changed to other languages) Injection unit: Screw diameter (mm): 45 Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil tank capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available on request.

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Gbjdpjyhbt Hjfx Anxsn Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: used, Year of construction: 2000, machine/vehicle number: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph This HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). This machine handles bottle formats up to 2 liters and produces up to 2700 bottles per hour (bph). Moreover, the system uses a 4+4 configuration, meaning four upper and four lower cavities, which optimize production with a symmetrical and highly efficient design. You can access this machine starting mid-October. Main Technical Features of the HDPE Blow Molding Machine TECHNE SYSTEM To ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. Mold Configuration and Flexibility Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specific production needs. Upon request, you can also add accessories or make necessary modifications, which we offer at separate quotations. Additionally, our technicians, who manage the disassembly, can reassemble the machine, thereby ensuring continuity and reliability in operations. Gjdpfxsvgvkae Anxebn Manuals and Technical Documentation This blow molding machine comes with complete technical manuals and detailed schematics, which will assist you during installation, maintenance, and daily operations. More specifically, the documentation provides detailed specifications regarding container tolerances and operational schematics of system components. As a result, the design optimizes critical values like bottle spacing and the distance between extruders and the container body. Production and Performance This Used Blow Molding Machine supports production capacities ranging from 2400 to 2700 bottles per hour, depending on operating conditions and container types. Therefore, it allows you to maintain a steady output rate. In terms of precision, the mold-carriage stroke extends to 660 mm, allowing well-calibrated movements that ensure production uniformity. Consequently, the machine can produce bottles up to 290 mm wide and 690 mm tall. Conclusions of the HDPE Blow Molding Machine TECHNE SYSTEM The Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph, available from mid-October, provides a versatile and highly efficient solution for companies that require a high production capacity. Additionally, you can customize the system by adding accessories upon request. As a result, the flexibility in mold configuration allows you to adapt the machine to a wide range of production demands. Lastly, the machine ensures operational efficiency due to its reliability, and the availability of technical support for both assembly and disassembly further enhances its performance.

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Gsdpfx Aeuiykdonxobn

Condition: reconditioned (used), We have a large stock of hydraulic valves for injection molding machinery. Gbjdst Hfw Ejpfx Anxsn

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, General Data Machine weight 14000 kg Measurements height 2355 mm Dimensions Machine Length 7800 mm Injection Unit Screw diameter 105 mm Clamping Unit Gedpfex Nr R Hsx Anxsbn Clamping force 6500 kN This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2004, condition: ready for operation (used), For sale is an injection molding machine brand Krauss-Maffei and type 125-520 C2 Gbodpfolkbhwox Anxjn The machine was in a company that attaches great importance to cleanliness and maintenance Year of manufacture 2004 Pneumatic valve gate 2X Hydraulic core pull 83000 production hours Clamping force of the mold: kN 1500 MC 4 control system with color monitor, integrated control panel 4 additional cylinders 1* D35 /2* D40 / 1* D45 additionally included Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Gbjdpsygikwefx Anxsn Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: new, Year of construction: 2024, GT SERIES KNIFE MILLS MACHINES IN SOUND-ABSORED HOUSING COMPLETE WITH BIG-BAG STATION Gedpfx Anoudyghexebn OPEN ROTOR WITH V-CUTTING SYSTEM THE FOLLOWING MILL SIZES ARE AVAILABLE IN STOCK GT300/600 ROTOR DIAMETER 300MM ROTOR LENGTH 600MM MAIN ENGINE 15KW GT300/800 ROTOR DIAMETER 300MM ROTOR LENGTH 800MM MAIN ENGINE 22KW GT400/800 ROTOR DIAMETER 300MM ROTOR LENGTH 800MM MAIN ENGINE 30KW

Year of construction: 2016, condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Gbsdpfjugmx Asx Anxjn