Engel DUO 7050/650 pico

Engel DUO 7050/650 pico

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Iisdpfx Acsyhbt Hjhed Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: used, Year of construction: 2000, machine/vehicle number: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bphMain Technical Features and Premium UpgradesThis HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). Specifically, this is a TECHNE 4000 T660 manufactured in 2000, which is preserved in an OPTIMAL state of cleanliness and order. Reflecting its meticulous maintenance history, the machine was cleaned daily in the lower section, and completely blown and cleaned once a week, starting from the extruder down to the bottom.In December 2023, the system received a brand-new retrofit consisting of a latest-generation Gefran PLC equipped with a color touch screen, fully customizable functions, and complete machine control via HMI. This upgrade also features a Gefran GFC modem for remote assistance.The machine operates with a 4+4 cavity double head configuration with a 150 mm cavity spacing, handling bottle formats up to 2 liters and producing up to 2700 bottles per hour (bph). This design optimizes production with a symmetrical and highly efficient layout. Furthermore, the system is equipped with proportional hydraulics for movements utilizing Rexroth hydraulics, along with independent control of 8 parisons. It features 8 parisons with independent profiles managed by Moog servovalves, offering precise parison control up to 400 points.The production line comes exceptionally well-equipped with peripheral machinery, including a complete plastic loader kit with a Moretto mixer, a Tria granulator (2022), and a Villani double leak tester (comprising 2 independent leak testers). Additionally, an extensive complete replacement kit is included. These spare parts encompass:All Rexroth proportional movement valves (carriage, nozzles, and molds)All linear transducersCarriage translation columns complete with a full set of bushingsClosing lever equipped with bushings and pinsA Voith hydraulic pumpAll ATOS hydraulic cylindersA brand-new direct current (DC) extrusion motorA brand-new direct current (DC) inverterVarious mechanical parts, heating elements, nozzles, cores, and diesYou can access this machine starting mid-October.Mold Configuration and FlexibilityTo ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage with a 660 mm carriage stroke, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. The system supports both straight or inclined blowing (up to 30 degrees), adapting easily to different container geometries.The extrusion system features a 100 mm / 25 L/D extruder equipped with a vertical filter. Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specif... Iisdovgvkajpfx Achjd

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Iijdpfxsuiykde Achsd

Condition: reconditioned (used), We have a large stock of hydraulic valves for injection molding machinery. Iiedpfx Acjt Hfw Eehsd

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding Ijdpfxjx D Rq Ej Achjid

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Isdsygikwspfx Achsid Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Year of construction: 2004, condition: ready for operation (used), For sale is an injection molding machine from Krauss-Maffei, model 125-520 C2. The machine was used in a company that places great emphasis on cleanliness and maintenance. Year of manufacture: 2004 Pneumatic needle valve 2x hydraulic core pull 83,000 operating hours Iisdpfxelkbhwe Achsd Form clamping force: 1500 kN MC 4 control system with color monitor, integrated control panel 4 additional cylinders: 1x D35 / 2x D40 / 1x D45, included Prices plus VAT Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine buying and selling WE BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: new, Year of construction: 2024, power: 15 kW (20.39 HP), GT SERIES KNIFE MILLS MACHINES HOUSED IN SOUND-ABSORBING ENCLOSURES, COMPLETE WITH BIG-BAG STATION OPEN ROTOR WITH V-CUTTING SYSTEM THE FOLLOWING MILL SIZES ARE CURRENTLY AVAILABLE IN STOCK GT300/600 ROTOR DIAMETER 300MM ROTOR LENGTH 600MM Iedpfsudyghex Achjid MAIN MOTOR 15KW ROTOR EQUIPPED WITH V-SHAPED KNIVES

Year of construction: 2016, condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Iodpfxougmx Ao Achjid

Condition: used, Year of construction: 2003, clamping force: 150 kN, displacement volume: 399 cm³, injection pressure: 1,598 bar, overall weight: 7,500 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Iisdpfsylz Aiex Achsd