Lathe - cycle-controlled
VDF Boehringer DUS 400 ti

Name: VDF Boehringer DUS 400 ti
Brand: VDF Boehringer
Availability: InStock

Year of construction

2006

Condition

Used

Location

Germany

Lathe - cycle-controlled VDF Boehringer DUS 400 ti

Basic data

Machine type:: Lathe - cycle-controlled

Manufacturer:: VDF Boehringer

Model:: DUS 400 ti

Year of construction:: 2006

Condition:: used

Price & Location

Location:: Deutschland

Call

Details about the offer

Listing ID:: A221-91267

Reference number:: 1092-03037

Update:: 02.09.2026

Description

centre distance 1000 mm
turning diameter over bed 420 mm
turning diameter over bed slide 235
turning length 1000 mm
spindle taper DIN 55027 Gr. 6
control MANUALPlus 4110
spindle bore 51 mm
turning speed range 3 - 3000 U/min
feed: 5.000/10.000 mm / min
drive capacity - spindle motor 11 kW
taper in tailstock-quill MK 4
dia. of quill 70 mm
quill stroke 110 mm
coolant ja/yes
voltage 400 V
Number of working hours 6.908 h
weight of the machine ca. 3 t
dimensions of the machine ca. 3,4 x 2 x 2,2 m
BOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006

-Control system: Heidenhain ManualPlus 4110
-11 kW AC main drive with 2-stage gearbox
-Work area cover with chip guard door
-Control panel mounted on the support, moves with the machine
-Holding brake
-Programmable cycles
-4-position quick-change turret
-Size 2 tool holder on fixed base
-With 1 WD ‘/25’ tool holder
-Tailstock
-Rapid traverse
-Coolant system
-Machine lamp

Condition:
Machine runs perfectly, no known faults, ready for immediate use.

Accessories:
1 three-jaw chuck 250 mm, bore 62 mm
1 set of hard jaws
4 sets of soft jaws including jaw holders
23 tool holders including tools
Prjdozgigdepfx Appeb

Translated with (free version)

Seller

Registered since: 2006

9 listings online

Call

Send inquiry

Telephone & Fax

+49 7082 ... show

+49 7235 ... show

Fax:

These listings may also fit your interest.

Listing

Cycle-controlled lathe VDF Boehringer DUS 400 ti

Oddense

7,443 km

Cycle-controlled lathe
VDF BoehringerDUS 400 ti

€6,000

Fixed price plus VAT

Call

Condition: used, Year of construction: 2004, total length: 3,400 mm, total width: 1,900 mm, total height: 2,200 mm, overall weight: 3,000 kg, VDF DUS 400 ti Psdpfszwbyqsx Apperb Year of manufacture: 2004 FORKARDT F+250 Previously used in the training department of a gear factory. Was in production until approximately 3 months ago. I own this lathe from 2004, as well as a DUS 560 ti from 2004 with a chip conveyor, and a DUS 560 ti from 2005. All three machines come from the same factory and were used together until they were dismantled in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have several chucks for the FORKARDT centering chuck. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

See details

Listing

Bühl

7,895 km

Center Lathe
OKUMALS

Call

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm Pjdjxwp Ebspfx Appsrb centre height 230 mm spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

See details

Listing

Germany

7,963 km

Universal Milling Machine
DECKELFP3

Call

Condition: used, Technical details: x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min Pedpeu U E T Ijfx Apporb quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m Milling machine with shaping head joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays *

See details

Listing

Center Lathe WEISSER-HEILBRONN Junior CNC

Eislingen/Fils

7,988 km

Center Lathe
WEISSER-HEILBRONNJunior CNC

Call

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm centre distance:750 mm spindle head:Gr.6 Psdpfx Apedmbrxoperb spindle bore:58 mm total power requirement:18 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:2,70x1,58x1,68 m

See details

Listing

NC multipurpose milling machine AIRCRAFT Optimill MF 4-B

Austria

8,383 km

NC multipurpose milling machine
AIRCRAFTOptimill MF 4-B

€15,860

EXW ONO plus VAT

Call

Listing

Lathe - cycle-controlled Pinacho Mustang 200

Oberweis

8,279 km

Lathe - cycle-controlled
PinachoMustang 200

Call

Condition: used, Year of construction: 2001, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI30 - Overhauled 2023 - Year of construction 2001 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW Pjdpfx Apovf I Dieporb - DC motor Z-axis power: 6.8 Nm - DC motor X-axis power: 3.4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2300 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

See details

Listing

Universal milling machine DECKEL FP 4 Typ 2700

Weiterstadt

7,845 km

Universal milling machine
DECKELFP 4 Typ 2700

Call

Year of construction: 1981, condition: used, Manufacturer: Deckel Type: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal movement (X-axis): 700 mm Transverse movement (Y-axis): 400 mm Vertical movement (Z-axis): 450 mm Spindle overhang: 50 - 450 mm Spindle mount: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5 - 1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5 - 1600 rpm Prsdpjihp U Djfx Appsb Machine weight: 2000 kg Feeds (X, Y, Z axes): 18, 10 - 500 mm/min Accessories: Milling head with quill Table: 1000 x 470 mm

See details

Listing

Center lathe **USED HARRISON** Alpha 460 Plus

Erith

7,247 km

Center lathe
**USED HARRISON**Alpha 460 Plus

Call

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: P40030, Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe. Specification Harrison Alpha 460plus Height of centres 230mm Distance between centres 1000mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Gap width from faceplate (approx) 216mm Spindle bored to pass 76mm Spindle speeds: Low range 2 to 500rpm High range 20 to 2000rpm Tailstock travel 145mm Tailstock diameter 95mm Tailstock taper No. 6 MT Approximate weight 2760kg Harrison Alpha 460 Plus Gap Bed CNC Lathe with Fanuc Pjdpfx Apsnxkcqepjrb Machine equipped with 3 jaw chuck Quick change toolpost and 4 off toolholders Harrison/Fanuc GE operator panel and screen Stationary steady Guarding Lighting Coolant system

See details

Listing

Universal milling machine Rogi WUM7550 VARIO

Mierlo

7,575 km

Universal milling machine
RogiWUM7550 VARIO

Call

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 585 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 320 mm, total height: 2,245 mm, total width: 1,340 mm, total length: 1,140 mm, table width: 240 mm, table length: 1,000 mm, type of input current: three-phase, rotational speed (max.): 2,000 rpm, rotational speed (min.): 100 rpm, overall weight: 1,000 kg, working range: 650 mm, input voltage: 400 V, distance table to spindle center: 370 mm, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Drilling capacity in steel ----- 50 mm Milling capacity in steel ----- 25 mm Face milling capacity ----- 100 mm Longitudinal travel (X) ----- 585 mm Transverse travel (Y) ----- 185 mm Vertical travel (Z) ----- 320 mm Horizontal motor ----- 1.5 KW Vertical motor ----- 2.2 KW Horizontal milling spindle ----- 60 ~ 1350 rpm (9) Vertical milling spindle ----- continuously variable 100-600 / 350-2000 rpm Spindle mount ----- ISO 40 Table ----- 1000 x 240 mm Weight ----- 1000 KG INCLUDED * DELTA frequency inverter * 3-axis digital readout SINO * Automatic longitudinal and transverse feed of the worktable * LED lighting * Cooling system * Deluxe control cabinet Pedpega Twfofx Apperb * Tilting milling head left/right 0 - 45 degrees * Rotating worktable * Various holders in a case

See details

Listing