Press brake

TRUMPF TrumaBend V85

Condition: good (used), Year of construction: 2002, Used 2-meter CNC press brake Type: V85 Capacity: 2050 x 85 tons Delem CNC control Year of manufacture: 2002 Stroke length: 365 mm Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC controlled Automatic Wila NS clamping system Adjustable table CNC crowning Prsdpfx Aoz Hwi Robaec

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Model: TrumaBend V85s Capacity: 2050 x 85 tons Control: Delem DA69 Axes: Y1, Y2, X, R, Z1 and Z2 Prsdpoy Dpufefx Abaoc Hydraulic WILA upper and lower clamping Year of manufacture: 2005

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Prodpfxjxaa Urs Abasc Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: ready for operation (used), Year of construction: 1998, overall weight: 8,600 kg, This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine. Additional equipment • Extended Installation Height and Stroke: Additional 150 mm each • 2nd Foot Switch Machine Benefits Technical Machine Benefits • Drive type: electro-hydraulic twin cylinder with independent y1/y2 movement • Power requirements: 11 kw / 415 v / 50 hz • Design: down-stroking with dual cylinder electro-hydraulic ram drive via proportional valves • Inclination of beam (y1/y2): +10 mm • Bending force: 850 kn // gap between columns: 2260 mm // throat depth: 410 mm // stroke length: 215 mm // open height: 385 mm • Bed width: 120 mm • Ram measurement: incremental with deflection compensation • Tool holders: self-centering top tool holder, hardened bottom tool holder • Hydraulic tool clamping: hydraulic clamping for both top and bottom tools • Safety features: safety screens, light barriers, single/double break modes // front support brackets: two quick-adjustable brackets Extra Information Back Gauge: CNC-controlled ‘X’ and ‘R’ axis back gauge with safe 2-finger adjustment X-axis Back Gauge Travel: 600 mm Maximum X Distance: 860 mm R-axis Vertical Travel: 250 mm Back Gauge Travel Speed: 500 mm/sec Pjdpszuxkhsfx Abaerc R-axis Speed: 300 mm/sec Z1/Z2 Axis: CNC-controlled, asymmetric finger adjustment Working Speeds: Approach Speed: 200 mm/sec Operation Speed: 1–10 mm/sec Return Speed: 135 mm/sec Technical Specification Bending Length 2550 mm

Condition: used, functionality: fully functional, Year of construction: 2001, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Pedpfow Imq Rjx Abajrc

Condition: ready for operation (used), Year of construction: 1996, stroke length: 365 mm, overall weight: 9,050 kg, pressing force: 85 t, Equipment: documentation/manual, Hydraulic press brake Manufacturer: TRUMPF, Type: TrumaBend V85 Year of manufacture: 1996 Technical data Manufacturer: Trumpf Type: TrumaBend V85 Year of manufacture: 1996 Pjdoza Hxrepfx Abajrc Press force: 85 t Operating hours: 46927 h (metered) Bending length: 2050 mm Stroke: 365 mm Stand distance: 410 mm Motor power: 10 kW Dimensions: approx. L 2.70 x W 2.40 x H 2.40 m Weight: approx. 9050 kg Equipment: • Controlled axes: Y1, Y2, X, R, Z1, Z2 • CNC-controlled crowning system • 2D graphics control DELEM DA • Hydraulic tool clamping, top and bottom • Pneumatic die shifting All information is provided without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: like new (used), functionality: fully functional, Year of construction: 2001, stroke length: 365 mm, overall weight: 9,050 kg, pressing force: 85 t, clearance between the columns: 540 mm, table length: 2,100 mm, Equipment: CE marking, safety light barrier, The following 2 metre Trumpf press brake featuring the specific extended daylight configuration. The machine is in exceptionally clean, near-mint condition. This is largely because it is being sourced from an immaculate, highly regulated factory that manufactures components exclusively for the medical sector. Used Trumpf V series cnc pressbrake for sale Trumpf v85 2m x 85ton – 4axis cnc pressbrake / with Extended daylight and stroke Make: Trumpf Model: v85 Year: 2001 Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Crowing Complete with: Podszfp D Tepfx Abajrc • Extended stroke and daylight: 365mm maximum stroke / 535mm daylight • 2axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition Delivery to your works, installation and tuition with your operators available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, stroke length: 215 mm, throat depth: 410 mm, pressing force: 85 t, clearance between the columns: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Pjdpfey Ix Ipox Abaerc Press force: 85 t Bending length: 2,050 mm Frame gap: 1,750 mm Stroke: 215 mm Throat depth: 410 mm Controlled axes: y1, y2, x, R MACHINE DETAILS Control manufacturer: DELEM Total power: 13 kW Dimensions & Weight Dimensions (L x W x H): 3,190 x 2,100 x 2,375 mm Machine weight: 8,750 kg EQUIPMENT Two-hand foot operation 2 support arms Crowning Die shifting CNC control Side safety doors 2 manual backgauge fingers

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, bending force (max.): 85 t, stroke length: 215 mm, throat depth: 410 mm, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Throat depth: 410 mm MACHINE DETAILS Control: DELEM Dimensions & Weight Psdpfx Aoyhmdqobajrc Machine dimensions: 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg EQUIPMENT Two-hand operation 2 support arms Side safety doors Lasersafe Fissler Wila tool clamping Adjustable die position Crowning system Tool cabinet