Used Trumpf Trumabend V85 for sale (378)

Condition: excellent (used), Year of construction: 1999, Hours: approx. 24,000 6 axles Location available upon request. Bwedeznip Ijpfx Aizjr

Condition: used, Year of construction: 2001, 2001 Trumpf TrumaBend V85S CNC Press Brake Bjdpjzk I Uusfx Aizowr Pressing Force 850kN. Length Capacity 2,550mm. Distance Between Columns 2,260mm. Maximum Stroke 365mm. Maximum Operating Pressure 340 bar. Brake Time 74m/sec. Safety Distance 189mm. S/No. 884337 (2001). With Light Safety Guards & Pendant Control. Weight 9,950kg.

Condition: ready for operation (used), Year of construction: 1996, pressing force: 85 t, stroke length: 365 mm, overall weight: 9,050 kg, Equipment: documentation/manual, Hydraulic press brake Manufacturer: TRUMPF, Type: TrumaBend V85 Year of manufacture: 1996 Technical data Manufacturer: Trumpf Bwedpjza Hxrofx Aizer Type: TrumaBend V85 Year of manufacture: 1996 Press force: 85 t Operating hours: 46927 h (metered) Bending length: 2050 mm Stroke: 365 mm Stand distance: 410 mm Motor power: 10 kW Dimensions: approx. L 2.70 x W 2.40 x H 2.40 m Weight: approx. 9050 kg Equipment: • Controlled axes: Y1, Y2, X, R, Z1, Z2 • CNC-controlled crowning system • 2D graphics control DELEM DA • Hydraulic tool clamping, top and bottom • Pneumatic die shifting All information is provided without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: like new (used), Year of construction: 2001, functionality: fully functional, pressing force: 85 t, stroke length: 365 mm, table length: 2,100 mm, clearance between the columns: 540 mm, overall weight: 9,050 kg, Equipment: CE marking, safety light barrier, The following 2 metre Trumpf press brake featuring the specific extended daylight configuration. The machine is in exceptionally clean, near-mint condition. This is largely because it is being sourced from an immaculate, highly regulated factory that manufactures components exclusively for the medical sector. Used Trumpf V series cnc pressbrake for sale Trumpf v85 2m x 85ton – 4axis cnc pressbrake / with Extended daylight and stroke Make: Trumpf Model: v85 Year: 2001 Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Crowing Complete with: • Extended stroke and daylight: 365mm maximum stroke / 535mm daylight Bwodpfx Ajzfp D Tjizor • 2axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition Delivery to your works, installation and tuition with your operators available.

Condition: excellent (used), Year of construction: 2001, Technical specifications: Working length: 2050 mm Distance between uprights: 1750 mm Press force: 85 tons Control system: DELEM DA65A Adjustable back gauge Axes: Y1/Y2; X; R; Z1/Z2 Stroke: 365 mm Overhang: 410 mm Installation height: 535 mm Power: 11 kW Hydraulic tool clamping, top and bottom: WILA system CNC-controlled crowning I-axis: pneumatic die shifting ACB angle control system CE marking Dimensions (length x width x height): approx. 2200 x 2750 x 2900 mm Weight: approx. 9.5 tons Condition: Very good condition, retrofitted in 2026 Bwodpfozbuc Ijx Aizer The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear and tear are commensurate with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Model: TrumaBend V85s Bwsdpfjy Dpufsx Aizer Capacity: 2050 x 85 tons Control: Delem DA69 Axes: Y1, Y2, X, R, Z1 and Z2 Hydraulic WILA upper and lower clamping Year of manufacture: 2005

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) Bwsdpfxjxaa Urs Aizjr with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: good (used), Year of construction: 2005, functionality: fully functional, Used 2-meter CNC press brake from Trumpf Model: V85 Bwodpfx Asx I N Awoizor Capacity: 2050 x 85 tons Delem CNC control CNC-controlled Y1, Y2, X, and R axes Wila hydraulic upper clamping Year of manufacture: 2005 Without tools

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, pressing force: 85 t, stroke length: 215 mm, throat depth: 410 mm, clearance between the columns: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bjdpfxsy Ix Ipe Aizswr Bending length: 2,050 mm Frame gap: 1,750 mm Stroke: 215 mm Throat depth: 410 mm Controlled axes: y1, y2, x, R MACHINE DETAILS Control manufacturer: DELEM Total power: 13 kW Dimensions & Weight Dimensions (L x W x H): 3,190 x 2,100 x 2,375 mm Machine weight: 8,750 kg EQUIPMENT Two-hand foot operation 2 support arms Crowning Die shifting CNC control Side safety doors 2 manual backgauge fingers

Condition: used, Year of construction: 2001, functionality: fully functional, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Bwodpfew Imq Rjx Aizor

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, stroke length: 215 mm, throat depth: 410 mm, bending force (max.): 85 t, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Throat depth: 410 mm MACHINE DETAILS Control: DELEM Dimensions & Weight Machine dimensions: 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg EQUIPMENT Two-hand operation 2 support arms Side safety doors Lasersafe Fissler Wila tool clamping Adjustable die position Bodjyhmdqepfx Aizowr Crowning system Tool cabinet

Condition: excellent (used), Year of construction: 2002, 6 axles Operating hours approx. 50,000 hours. Bsdpfx Aezcvwcjizswr

Condition: excellent (used), Year of construction: 2002, Operating hours: approximately 39,000 hours. Bwjdpfxozcvvfo Aizer

Condition: ready for operation (used), Year of construction: 2003, operating hours: 57,202 h, pressing force: 173 t, stroke length: 365 mm, total height: 3,100 mm, overall weight: 18,000 kg, controller manufacturer: TRUMPF, number of axes: 8, This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine. Machine Benefits Technical Machine Benefits • Distance between column: 3680 mm Bwsdpfx Aiox D Ilyozor • Distance beam - table: 535 mm Extra Information Machine still under power Technical Specification Bending Length 4080 mm Dimensions Machine Depth 5000 mm

Condition: excellent (used), Year of construction: 1998, Hours: approx. 45,600 6 axles Bsdpjzniq Esfx Aizowr Location available upon request.

Condition: excellent (used), Year of construction: 1999, 6-axis press brake Bodpfjznipuex Aizjwr Location available upon request.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, operating hours: 77,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TrumaBend V1700S / 4m bending length Year of manufacture: 2006 Press force: 1700 kN (170 tons), bending length: 4080 mm Machine operating time: 77,000 hours, hydraulic operating time: 48,000 hours New IPC (KEBA 5) Configuration 1 active bending aid, 2 support consoles 4-axis back gauge CNC-controlled crowning Hydraulic upper tool clamping Bedpfx Aiozrnrcszowr Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: ready for operation (used), Year of construction: 2001, year of last overhaul: 2025, We are offering this used TRUMPF TrumaBend V320 press brake, manufactured in 2001. Manufacturer: TRUMPF Model: TrumaBend V320 Year of manufacture: 2001 Condition: ready for use Category ID: 1295 Type ID: 1717 Machine type: Press brake Standard equipment: - Upper drive concept with two-cylinder design Y1/Y2 - electro-hydraulic ram drive with proportional valve technology - ram stroke measuring system with spring compensation via glass scales - modern block hydraulics - spherical suspension and inclination of the pressure beam - CNC back gauge system - safe front finger adjustment - 2 pcs. back gauge fingers - self-centering, manual, hardened upper tool holder for vertical tool change - hardened, manual lower tool holder - program-controlled lower tool displacement (I-axis) for 2 positions - flat front cover - modern protective cover - CE marking - Operating manual - No bending tools Optional equipment: + CNC crowning + Back gauge system, 4 axes + Upper tool clamping, hydraulic and hardened + Lower tool clamping, hydraulic Bodpfxoznxide Aizswr If you have any questions or need further information, please send us a message or call us.

Condition: used, Year of construction: 1996, pressure 0050 t chamfer lenght 1270 mm distance between columns 1040 mm stroke 215 mm throat 410 mm dayligth 385 mm back stop - adjustable 860 mm working feed 1 - 10 mm/sec return speed 135 mm/sec total power requirement 8,6 kVA weight of the machine ca. 4750 kg dimensions of the machine ca. 2000 x 2100 x 2400 mm - controlled axes: Y1, Y2, X, R - Pneumatic die shift - hydraulic WILA/TRUMPF upper tool clamp - hydraulic WILA/TRUMPF lower tool clamp - LAN network connection - 4 stop fingers manually adjustable, foldable to the rear, pneumatic clampable Bwjdpfey Hxmiox Aizsr - CNC control, operation on the front left - 2-hand operation / foot switch - rear + side protection

Condition: ready for operation (used), Year of construction: 1998, pressing force: 133 t, total width: 3,640 mm, total height: 2,690 mm, overall weight: 10,650 kg, travel distance X-axis: 600 mm, travel distance Z-axis: 2,310 mm, number of axes: 4, This 4-axis TRUMPF Trumatic Trumabend V130 was manufactured in 1998. It features a press force of 1300 kN and a bending length of 3060 mm. The machine has a weight of 10,650 kg and a throat depth of 410 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF Trumatic Trumabend V130 press brake we have for sale. Contact us for further details. • Distance between columns: 2,690 mm • Throat: 410 mm • Table width: 120 mm • Mounting height: 385 mm (standard) / 535 mm (extended height) • Working height: 1,050 mm • Y-axis: • Rapid speed: 200 mm/s • Working speed: 1–10 mm/s • Return speed: 135 mm/s • Stroke: 215 mm (standard) / 365 mm (extended height) • Positioning accuracy: 0.01 mm • X-axis: • Max gauge range: 860 mm • Travel: 600 mm • Positioning accuracy: 0.04 mm Bwedszf If Aspfx Aizjr • Feed rate: 500 mm/s • R-axis: • Travel: 250 mm • Positioning accuracy: 0.08 mm • Feed rate: 300 mm/s • Z-axis: • Travel: 2,310 mm • Positioning accuracy: 0.06 mm • Feed rate: 1,000 mm/s • Electrical system power: 18.7 kW • Pneumatic system pressure: 6 ± 1 bar • Hydraulic oil capacity: not specified Technical Specification Bending Length 3060 mm

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours Bodsxacfmspfx Aizowr - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Condition: good (used), Year of construction: 2001, functionality: fully functional, Press force: 230 t Bending length: 3060 mm Frame width: 2690 mm Stroke: 365 mm Control system: DELEM DA 65 Bsdozd Tkbspfx Aizswr Overhang: 410 mm Installation height: 535 mm Dimensions: 3660 x 2310 x 3100 mm Machine weight (approx.): 17,700 kg Equipment: - CNC control system Delem - Crowning - Wila tool holder - 1 bending aid - 2 support arms - Side protection doors - 2-hand foot control - Die shifting - 2 manually adjustable stop fingers - Controlled axes: y1, y2, x, r - Operating hours: 13,993 h

Condition: good (used), Year of construction: 2005, functionality: fully functional, Press force: 130 t Bending length: 3100 mm Frame width: mm Control system: DELEM DA-69TW Stroke: 365 mm Machine weight (approx.): 12,950 kg Accessories: - 2 support arms in front of the machine - CNC control system Delem Bwsdpfx Aiezd Snxozor - Crowning - Die shifting - Wila tool holder - Side protective doors - Light curtain - Controlled axes: y1, y2, x, r - 2 adjustable support fingers

Condition: ready for operation (used), Year of construction: 2000, pressing force: 51 t, controller manufacturer: DELEM, number of axes: 4, This 4-axis TRUMPF TrumaBend V50 was manufactured in 2000. It features a work length of 1270 mm and a press force of 50 tons. The machine includes a back gauge with 2 axes for enhanced precision. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V50 press brake we have for sale. Contact us for further details. Bwodezcnfxepfx Aizer Technical Specification Bending Length 1270 mm

Condition: ready for operation (used), Year of construction: 2000, pressing force: 51 t, controller manufacturer: DELEM, number of axes: 4, This 6s TRUMPF TrumaBend V50 was manufactured in 2000. It features a work length of 1270 mm and a press force of 50 tons. The machine includes a back gauge with 4 axes for enhanced precision. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V50 press brake we have for sale. Contact us for further details. Bedpfx Aezcnacjizjwr Technical Specification Bending Length 1270 mm