Injection molding machine

SUMITOMO shi-Demag

Condition: used, Year of construction: 2019, Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 Injection Moulding Machine General Information Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Country of Origin: Germany CE Marked: Yes Availability: Immediately available Location: Belgium ----- Technical Specifications Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Control System: NC5 Plus / C-Dias Machine Weight: 67,600 kg Maximum Operating Pressure: 210 bar Power Supply: 3 × 400 V / 50 Hz Connected Load: 204 kVA Rated Current: 552 A ----- Predpfo Afbz Uox Abaec Operating Hours PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Heating Hours: 29,982.7 hours ----- Description Well-maintained Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 all-electric high-performance injection moulding machine built in 2019. The EL-EXIS series is specifically designed for applications requiring exceptional productivity, fast cycle times, high precision and reduced energy consumption. It is particularly suitable for packaging applications, thin-wall products and technical mouldings. The machine is equipped with the advanced NC5 Plus / C-Dias control system and remains in very good operating condition. Inspection under power can be arranged by appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Availability: Immediately available Location: Belgium Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Machine Weight: 67,600 kg PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Maximum Operating Pressure: 210 bar

Condition: good (used), Year of construction: 2011, operating hours: 48,060 h, clamping force: 35 kN, screw diameter: 18 mm, clearance between the columns: 32 mm, displacement volume: 23 cm³, injection weight: 21 g, SUMITOMO shi-Demag Systec 35/320-25 Closing force: 35 tons Year of manufacture: 2011 Podpfx Abe Agpcqeasrc Tie bar diameter: 18 mm Tie bar spacing: 32x32 Mounting height: 320 mm Operating hours: 48,060

Condition: used, Year of construction: 2000, screw diameter: 95 mm, clearance between the columns: 1,000,900 mm, injection pressure: 1,832 bar, injection weight: 2,550 g, mold height (min.): 450 mm, ejector force: 138,000 N, ejector stroke: 300 mm, plate length: 1,450 mm, plate width: 1,350 mm, total length: 10,100 mm, total width: 2,500 mm, total height: 2,600 mm, overall weight: 33,200 kg, Demag Ergotech 650/1000-5200 system Year of manufacture: 2000 Control system: NC4 Injection unit 5200 - Screw diameter: 95 mm - Specific injection pressure: 1832 bar - Injection volume: 2835 ccm - Injection shot weight: 2550 g - Pump motor power: 74 kW - Cylinder heater power: 43 kW - Screw L/D ratio: 20 Mold closing unit 6500 - Clamping force: 650 t - Mold plate dimensions: 1450 x 1350 mm - Distance between tie bars: 1000 x 900 mm - Ejector force: 138 kN Prsdpj Adp Elefx Abaec - Mold height: 450 mm - Opening stroke: 930 mm - Maximum mold plate distance: 1880 mm - Ejector stroke: 300 mm Electrical connection (fuse): 1300 A Weight: 33200 kg Dimensions (m) length x width x height: 10.1 x 2.5 x 2.6 m Equipment: - NC4 control system with color screen - Screw Ø 95 mm, L/D 20 - Injection, holding, and packing pressure adjustable by servo valve - Core pull system with 4 circuits on proportional valves on the moving platen - Hot runner control with 8 zones - Hydraulic control for hot runner nozzles (1 valve) - 10-circuit water distribution manifold with temperature indication - Pneumatic ejector - Additional fine oil filter in the bypass - Interface for a host computer

Condition: used, Year of construction: 2003, screw diameter: 80 mm, clearance between the columns: 800,710 mm, injection pressure: 1,855 bar, injection weight: 1,600 g, mold height (min.): 380 mm, ejector force: 90,000 N, ejector stroke: 230 mm, plate length: 1,200 mm, plate width: 1,100 mm, total length: 8,400 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, Demag Ergotech 420/800-3300 system Year of manufacture: 2003 Control system: NC4 Injection unit 3300 - Screw diameter: 80 mm - Specific injection pressure: 1855 bar - Injection volume: 1779 cc - Injection shot weight: 1600 g - Cylinder heating band power: 31 kW - Screw L/D ratio: 20 Tool clamping unit 4200 - Clamping force: 420 t - Tool plate dimensions: 1200 x 1100 mm - Daylight between columns: 800 x 710 mm - Ejector force: 90 kN - Tool height: 380 mm - Opening stroke: 710 mm - Maximum distance between platens: 1530 mm Podj Adpt Aspfx Abajrc - Ejector stroke: 230 mm Electrical connection (fuse rating): 760 A Weight: 21000 kg Dimensions (m) length x width x height: 8.4 x 2.2 x 2.5 m

Condition: good (used), Year of construction: 2011, SUMITOMO shi-Demag Systec 120/470-430 Closing force: 120 tons Pjdpfx Abe Acf Rheaorc Year of manufacture: 2011 Control system: CDAIS Mold opening distance: 47.5 x 47.5 Installation height: 250 mm Operating hours: 38,877 hours Screw diameter: 40 mm Injection volume: 231 cm³

Condition: ready for operation (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580,580 mm, injection weight: 402 g, opening stroke: 690 mm, installation height: 340 mm, Incl. Geiger robot Midiliner F 10.0 year 2011, Conveyor and safety cage Prsdpfxj Aarbbs Abaec

Condition: used, Year of construction: 2011, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, injection pressure: 1,914 bar, injection weight: 294 g, mold height (min.): 275 mm, ejector force: 59,000 N, ejector stroke: 160 mm, total length: 5,410 mm, total width: 1,660 mm, total height: 2,140 mm, overall weight: 7,090 kg, Used Sumitomo (SHI) Demag Systec 160/520-600 injection molding machine, manufactured in 2011. Technical specifications: - Clamping force: 160 t (1600 kN) - Injection unit: 600 - Screw diameter: 45 mm, L/D 20 - Specific injection pressure: 1914 bar - Injection volume: 323 cc - Injection shot weight: 294 g Podpez T Iufefx Abajrc - Cylinder heater power: 11.3 kW - Tool plate dimensions: 770 x 770 mm - Distance between columns: 520 x 520 mm - Tool height (min.): 275 mm - Opening stroke: 500 mm - Maximum distance between plates: 1085 mm - Ejector force: 59 kN - Ejector stroke: 160 mm - Weight: 7090 kg - Dimensions (L x W x H): 5.41 x 1.66 x 2.14 m - Control system: NC5 Equipment: - NC5 control system with color screen - Screw Ø 45 mm, L/D 20 - 5-zone hot runner control - Air blow valve on the moving platen - Clamping force adjustment - Active mold protection (activeProtect) - Demag robot interface - WC5 remote service - Process data logging and statistics - Reinforced oil cooler

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 Predpfx Aez Iplmobaec 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, Sumitomo Demag Systec 210/580-430 with Sepro Success 22 robot / Hybrid machine Year of manufacture: 2014 Injection unit: Screw diameter: 35 mm Shot weight: 153 g Prodpfx Abjz Ipkcjaec Injection pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Tie bar spacing: 580x580 mm Platen size: 860x860 mm Ejector: hydraulic Clamping unit: toggle Controller: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic operation Euromap 67 Robot interface Air valve x 9 Hydraulic needle core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air core pull x 5 Controller with hot runners x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Parallel movements Integrated printer Dimensions: Weight: 8930 kg Length/Width/Height: 6.02x1.76x2.15 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 Predsz Ipi Sspfx Abaoc 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request