Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: A1607, production capacity: 500 unit/h, TECHNICAL DETAILS Pallet sizes: Euro pallet: 800 × 1,200 mm CP1 pallet: 1,000 × 1,200 mm Chsdpfjz Hwfrex Aa Tec Bag weight: max. 50 kg Capacity: up to 500 bags/hour EQUIPMENT Sheet dispenser Wrapping machine

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Chodpfx Aasz Dhrqs Tec Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: used, Year of construction: 2022, operating hours: 100 h, functionality: fully functional, type of input current: three-phase, input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, Fully automatic filling machine from the Boloni brand. ATEX-certified. Suitable for filling 25L containers. Filling by weight using load cells. The machine fills 4 containers simultaneously. Chjdpfx Aaezx Urij Tjc Automatic capping and palletizing robot. Connection between the various components via conveyor belts (steel). The machine has only been used for a limited number of hours. The machine is available for immediate delivery.

Condition: used, Year of construction: 2014, Filling machine for sauces, dips, and salads 3 filling heads Type FM03 Csdpfx Aasz Hv Eks Tshc Machine no.: WA13.842 Year of manufacture: 2014 Electrical connection: 400V / 50Hz Dimensions in meters: 1.50 x 1.45 x 1.90

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Chodpozmd Uisfx Aa Toc Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Pressure 6 bar, Pump capacity 80 m3/h , el.mootor 18,5 kW, 1470 rpm, 34,7 A. Quantity 7 psc. Chjdpsz A Au Rsfx Aa Tec

Condition: used, Year of construction: 2001, functionality: fully functional, Gassner closure feeding system with pneumatic lifting station and blower Air transport filter system Chedpjww Hvmefx Aa Toc Special price due to warehouse clearance: €3,600 ex works Külsheim.

Condition: used, AZO GmbH big bag discharging station with metering screw and vibrating base Includes buffer silo, vibrating base, and metering screw with end gate. Includes platform and staircase. Includes filter housing with dust extraction system, 1500 m³/h. Frame made of coated steel. Big bag discharging station entirely made of stainless steel. Chodpsz Hc T Ijfx Aa Tsc See our other listings.

Condition: used, Year of construction: 2012, We offer this used OMAG MOD. CONF. DIVA-5 OMAG STICK PACKAGING MACHINE mod. DIVA/5, year of construction 2012. Model: MOD. CONF. DIVA-5 Serial number: 2298 Year of manufacture: 2012 Accident protection guards compliant with with CE norms. Required electric power: three phase 220/380 V, 50 60 Hz. Required compressed air: 6 Atm. Frame in welded steel and painted with epoxy resin paint. Chjdpfx Aex Rw Hvja Tjc Colour code: RAL 9006 (OMAG standard). If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), MESPACK H-320 SCD – Automatic Pouch Filling and Sealing Machine The MESPACK H-320 SCD is an automatic pouch filling and sealing machine designed for the industrial filling and packaging of products in pre-formed flexible pouches. MESPACK is a manufacturer specializing in flexible packaging machinery, and the H-320 SCD is designed to automate the various stages of the process, including pouch handling, opening, filling, and sealing, within an industrial line. The machine automatically manages the pouches from feeding and positioning to final filling and sealing, providing an integrated solution for continuous production packaging lines. MAIN FEATURES -Manufacturer: MESPACK -Model: H-320 SCD -Type: Automatic pouch filling and sealing machine -Format: Pre-formed flexible pouches -Automatic pouch feeding -Pouch opening and positioning -Product filling station -Automatic sealing -Automatic packaging handling -Continuous industrial production -Robust construction for professional use -Integrable with different feeding and dispensing systems -Compatible with inspection, transportation, and end-of-line equipment APPLICATION Codpfx Ajy Nzm Dsa Tohc The MESPACK H-320 SCD is designed to automate the various operations necessary for packaging products in pre-formed pouches. The machine individually receives each pouch, positions and opens it, and then performs the filling operation using the corresponding dispensing system. Once the product has been introduced, the machine automatically seals the pouch, preparing it to continue to the next stage of production. Depending on the product and the line configuration, it can be combined with: -Product feeding systems -Volumetric dispensers -Liquid dispensers -Weighing machines -Weight controllers -Metal detectors -Inspection equipment -Conveyors -Stacking and end-of-line systems APPLICATIONS A particularly interesting solution for food manufacturers and processing and packaging companies looking to automate the filling and sealing of products in pre-formed flexible pouches. The MESPACK H-320 SCD can be integrated into both existing packaging lines and new installations designed for the processing and automatic packaging of products in pouch format. Machine available for inspection. Additional technical information, dimensions, photographs, or videos can be provided upon request.

Condition: ready for operation (used), functionality: fully functional, 2 conveyor belts + bagging system in good condition. Industrial conveying and feeding system AP Maschinenbau SL 4 S – fully functional Chodpszy Suqjfx Aa Toc For sale is a robust industrial conveying and feeding system from AP Maschinenbau GmbH, Magdeburg, manufactured in 1995. The system consists of a large storage/feed hopper with a supporting structure, as well as several conveyor belts, and is suitable for the transport and feeding of bulk and piece goods. Technical data: * Manufacturer: AP Maschinenbau GmbH, Magdeburg * Type: SL 4 S * Factory No.: 172 * Year of manufacture: 1995 * Equipment No.: 7029 * Several conveyor belts * Robust steel construction * Electric drives * Motor power: 1.1 kW * Motor: Dutch Motors * Type: M2 90L6 * 400 V / 50 Hz * 910 rpm * Protection class IP55 Condition and function The system is in used condition, commensurate with its age, and shows corresponding signs of wear and tear, as well as rust and paint chipping. The system is fully functional. A functional test is expressly possible during an on-site inspection. Interested parties can therefore verify the condition and function of the system themselves before purchasing. The system is sold in its current condition. Inspection and functional test possible after prior appointment. Interesting for: * Recycling and processing companies * Construction material and bulk goods processing * Agriculture * Industrial and production companies * Machine builders * Recovery of spare parts or conversion

Condition: like new (used), Year of construction: 2023, operating hours: 80 h, functionality: fully functional, Equipment: documentation/manual, We offer this like-new HEIDE Klamotec BigBag loading station container filling system, manufactured in 2023. Manufacturer: HEIDE Model: Klamotec Year of manufacture: 2023 Condition: like new Category ID: 437 Chjdpszwuqvefx Aa Toc Type ID: 256 Machine type: BigBag loading station container filling system If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. Csdpfxjzmyvis Aa Tohc • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: AC, input voltage: 400 V, year of last overhaul: 2025, input frequency: 50 Hz, Equipment: documentation/manual, Manufactured by Eurostar Italy - one of the leading filling manufacturers Designed for filling Apple Cider, Beer, CSD and still drinks Triblock -rinser - filler - capper 2,000 BPH at 500ml bottles 3,000 BPH at 330ml bottles Isobaric Counterpressure Filling, designed for cider, beer, and other still & sparkling beverages Double Pre-Evacuation with Vacuum Pump, ensuring minimal oxygen pickup for superior product quality 316 Stainless Steel contact parts for superior hygiene and durability Pneumatic Bottle Lifters - overhauled 2025 Twin-channel rinser with final blow-off - overhauled 2025 Crown Cap (26mm caps) Capper Bypass - to feed to other cappers Touch Screen Control Panel for easy operation and monitoring Siemens PLC System, providing precise process automation and flexibility Variable speed control via inverter drive Chjdpfx Aex A U Urea Tec CIP Cups, Cleaning fluid can be recycled Change Parts Included for 250ml, 330ml, 500ml, and 750ml glass bottles Heavy-duty stainless steel frame CE-compliant safety Includes all manuals Spare Parts package Spare Fill tubes - new for adaptation to any bottle fill height Spare filling valve seals etc. Can be loaded to buyer's transport

Condition: used, functionality: fully functional, Dosing hopper with inclined base, equipped with an extraction screw conveyor. Chedpfx Aaozxz Iqj Tsc Capacity: 3 m3 Dimensions: 2800x1400x2300mm Driven by a high-efficiency ALMO IE3 geared motor (model MH3-100L4, 230/400V, 1445 rpm, manufactured 07/2017). Equipped with plexiglass inspection windows. Mounted on a mobile frame with wheels. In good overall condition. Made of painted steel.

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, Disassembled prototype filling/dispensing system – special system with V2A tanks Chsdpjzabgwsfx Aa Tsc For sale is a disassembled prototype filling/dispensing system from industrial use. This is a custom-made/special construction from Evonik/Daimler AG. The system was professionally disassembled, is in good condition, and is prepared for transport. Technical data / equipment * Manufacturer: Evonik / Daimler AG * System type: Prototype filling/dispensing system * Model: Special system / tank farm and filling system * Year of construction: 2010 * 2 tanks with 40 m³ each * 1 tank with 30 m³ * Tanks / system made of V2A * Pumps stored separately * Pump list can be provided upon request * Condition: disassembled, untested, prepared for transport Notes Due to the disassembled condition, the system is sold untested. An inspection is recommended. Technical testing, media compatibility, recommissioning, and transport organization are the responsibility of the buyer. Further information, existing documents, and the pump list can be provided upon request. Please contact us preferably by email. Telephone inquiries should only be made after prior appointment.

Condition: new, Year of construction: 2020, functionality: fully functional, BOSCH Pharmatec CIP System 8X0400 – Never Used – GMP Pharma Version For sale is a complete BOSCH Pharmatec CIP (Cleaning in Place) system in new condition (Never Used). The system was manufactured in 2019/2020 but was never put into operation. Since delivery, it has been stored professionally and is in excellent condition. The system was developed according to the highest GMP standards and is ideally suited for the pharmaceutical, biotechnology, vaccine, and food industries. Technical Data Manufacturer: Bosch Pharmatec GmbH (now Syntegon) Type: CIP Unit 8X0400 Year of Construction: 2019 / 2020 Condition: Never Used / New GMP Version Stainless Steel Design CE Marking Immediately available Scope of Supply BOSCH Pharmatec CIP Unit 8X0400 Stainless Steel Water Tanks CIP Satellites Complete Pump Skids KPA Hygienic Pumps Endress+Hauser Measuring and Control Technology Hygienic Stainless Steel Piping Valves and Fittings Heat Exchangers Original Bosch Documentation P&ID Flow Diagrams Layout Drawings and Technical Documents Important Note The system is offered without pneumatic components and without control (automation). This allows the system to be individually adapted to the buyer's requirements and equipped with a modern PLC, pneumatic, and automation solution as desired. This offers maximum flexibility for new installations or integration into existing production facilities. Application Areas Pharmaceutical Industry Biotechnology Vaccine Production Sterile Production Facilities API Manufacturing Supply of Purified Media GMP Production Plants Contract Manufacturing (CMO) Advantages Original Bosch Pharmatec Quality Never Put Into Operation High-Quality GMP Version Complete Technical Documentation Available Flexible Retrofitting of Control and Pneumatic Technology According to Customer Requirements Chedpfx Aaezpy Nzs Toc Immediately Available Significantly Cheaper Than a Comparable New System The system can be inspected by appointment. We will gladly send you further photos, technical documents and drawings upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, This is an ATEX-certified filling machine, suitable for standard 200L drums. The machine was purchased in 2024 but has never been used by us. It is still new in its original packaging. Chodpfx Aaozx S Eys Tec Brand: Boloni. The machine is sold in its current condition.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total width: 1,420 mm, total length: 1,830 mm, total height: 2,500 mm, empty load weight: 900 kg, Offered here is a used WK04 scale from KMK. Possible weighing range: 400g - 25kg Suitable for potatoes, onions, and beetroot Year of manufacture: 2019 Videos can be sent via WhatsApp upon request. Manufacturer details: WK04 Scale (Partial Portion Weigher) - Machine built from sandblasted and double powder-coated steel - Combination weigher with 4 weighing hoppers - 11-liter capacity per weighing hopper - For package sizes from 400g to 2500g, target weight is achieved in a single discharge - For 2.5kg to 15kg, target weight is achieved in two discharges Chedpsx R Umtjfx Aa Tsc - From 15kg upwards, target weight is achieved in three or four discharges - Package sizes from 0.4kg to 30kg - Independent feeding with vibratory plates - Vibration intensity of the feed adjustable via potentiometer in the control cabinet - Integrated cross conveyor with extra soft, curved carriers - Cross conveyor runs only after release by the packaging machine or, during manual packing, upon footswitch signal - For optimal product handling and adjustment to package size, the cross conveyor speed can be set using a frequency converter - Service platform with ladder - Product-contacting parts made of stainless steel - Optimal weighing achieved by easily adjusting multiple parameters relevant for filling the weighing hoppers (filling time, refill, tolerance, etc.) - Creation of up to 40 programs for different products, weights, tolerances, and outputs - Simple program management and operation via touchscreen monitor - Mitsubishi PLC - Fill level sensor for controlling the feed conveyor - 5 heavy-duty height-adjustable support feet - Can be interfaced with common packaging machines

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 844, PLEASE READ THE DESCRIPTION CAREFULLY Used IPF25 filling machine with integrated weigher for filling paper open-mouth bags, including bags with handles. The machine is suitable for processing a variety of bulk products, such as: Cat litter Cjdpfx Aezrvldoa Tjhc Pet food Charcoal Wood pellets Other dry bulk materials .... Bag dimensions: Width: 150 to 300 mm Length: 300 to 600 mm Side gusset: 35 to 85 mm The machine is currently in our workshop and is undergoing refurbishment. The refurbishment work will be carried out in stages. If you are seriously interested, we can expedite this process so that the machine becomes available sooner. Please feel free to contact us for additional information or to arrange a viewing.

Year of construction: 2008, condition: used, functionality: fully functional, Blažek ABM-5 D stick packaging line for sale – 3 machines available For sale are three fully functional Blažek ABM-5 D stick packaging lines, including downstream collection stations. These systems were specifically developed for the precise filling of fine-grained sugar and feature volumetric dosing for granules and crystalline raw materials. Thanks to their robust design and reliable technology, the machines are also suitable for numerous other free-flowing products with comparable properties. Technical specifications: Manufacturer: Blažek Type: ABM-5 D Dosing system: Volumetric dosing Suitable for: Fine-grained sugar Granules Crystalline raw materials Current configuration: 5 sticks per cycle Includes downstream collection station Machines are fully functional Available systems: Year of manufacture 2008 Year of manufacture 2008 Year of manufacture 2016 Condition All systems are in functional condition. A demonstration in test operation on-site is possible by arrangement, so that interested parties can be convinced of the function and performance of the machine. Inspection An inspection of the systems is possible by appointment. We will gladly provide further technical information, pictures, or a test run video. If you are interested, we look forward to hearing from you. Csdpszvww Nofx Aa Tjhc

Condition: used, Year of construction: 2010, machine/vehicle number: 106547, volume flow: 182 m³/h, operating pressure: 10 bar, power: 87 kW (118.29 HP), rotational speed (max.): 1,315 rpm, Bornemann pumps, type HC 180-68, 10 bar pressure, 182.6 m³/h. Fitted with ABB motors, type M3KP315, 132 kW, 232 A. Good condition, 4 units available. All pumps in stock can be viewed in the catalogue. Chedpovwmpbofx Aa Toc

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, For sale is a Nordson Pico Puls Jet system including accessories. The offer includes the following components: - 1 piece Pico Touch Controller (item no. 7361217) - 1 piece Pico Puls Jet valve (item no. 7361283) - 2 pieces 2m extension cable (item no. 7361298) - 1 piece quick-change holder for robots Additional accessories are available for purchase at an extra cost: - 1 piece Pico Puls fluid body 5.0 S P7 D15 (item no. 7362711); selling price 500.00 EUR each Chedpfoy D Shbsx Aa Toc - 3 pieces Pico Puls fluid body 5.0 S F0 D30 (item no. 7362584); selling price 500.00 EUR each

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Norden 700 Plastic Tube Filler Provides outputs of up to 70 tubes per minute and is designed and manufactured to produce the highest possible packaging quality standards at maximum operational efficiencies. Plastic and laminate tubes may be sealed using the Norden´s patented Hot-Air Sealing system. Codpov Hxu Usfx Aa Tjhc Year: 2006 Model:700 Key information: – Production capacity: 70 tpm – Filling volume: 1-300 ml – Tube length: 50-250 mm – Tube diameter: 10-60 mm – Infeed system: cassette – Blow off filling nozzle - Fully working condition

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Equipment: type plate available, device for dosing pastes, jams, meat, cheese, etc. into aluminum and plastic cups, including an aluminum lid sealing machine and a date coder Chsdpfx Aow E H A Aea Tec