Cylindrical grinding machine

Studer S30

Condition: used, Surface grinder Center height 125 mm Distance between centers 650 mm Grinding wheel diameter 250 mm Grinding disc diameter 400 mm Total power requirement 8 kW Weight approx. 2500 kg This is a machine from Machines4you. Ibsdpfx Asgfqn Nobrja

Condition: ready for operation (used), functionality: fully functional, The Studer S30-12 CNC is a precision cylindrical external grinding machine from Fritz Studer AG. Brand: Studer Type: S30-12CNC Iodpfszn Nqrsx Abroba Serial number: 1248.74 Dimensions: L3250mm Dimensions: W2000mm Dimensions: H1950mm Wheel speed: 30 m/s

Condition: refurbished (used), machine/vehicle number: 3439.39, Universal cylindrical grinding machine for external and internal cylindrical grinding. • Distance between centers: 650 mm • Height between centers: 175 mm • Completely overhauled (refurbished) – The machine was completely disassembled and rebuilt component by component. Guide rails were reconditioned, bearings were replaced, new control cabinet and new electrical installation, complete new paint job, and geometrical readjustment for maximum precision. Ibsdpfx Aboxxy A Teroa • Equipped with a digital measuring system (Fagor). • Machine condition comparable to a new machine, ready for immediate use. • Extensive accessories included in the scope of delivery, as shown in the photos. • Demonstration under power and test run possible at any time. Availability: Available for immediate delivery!

Condition: refurbished (used), Year of construction: 2025, Studer S30 Maximum distance between centers: 125 mm Distance between centers: 650 mm Workpiece weight: 80 kg Additional optional features: - Completely new control cabinet with basic PLC and panel Ibjdpfx Aed Hdxwsbrja - Conversion to ball screw drive incl. PLC Pro (cycle-controlled) - "Workpiece memory" PLC Pro for 10/15/30/50 workpieces - Glass scale in X and Z axes - Swivelable internal grinding device - Motor spindle for internal grinding device - Frequency converter for external grinding spindle - Frequency converter for internal grinding spindle - In-process grinding sensor - Guard for external grinding spindle - Safety door - manually operated - Grinding wheel flange - LED spotlight with flexible arm - Matching coolant system

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 019.3790, Machine undergoing repair/overhaul = estimated delivery time approximately 8-10 weeks. Ijdpfxszbqzae Abroba Technical data + accessories, see separate PDF.

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Iodpovca Izefx Abrsba Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Year of construction: 1999, condition: ready for operation (used), travel distance X-axis: 275 mm, travel distance Z-axis: 1,050 mm, controller manufacturer: FANUC, controller model: Series 16-T, number of axes: 2, Cylindrical grinding machine manufactured in 1999. This STUDER S30 LEAN PRO features maximum table swivel 8.5 degrees, X-axis travel of 275 mm, and Z-axis travel of 50 mm. If you are looking to get high-quality grinding capabilities, consider the STUDER S30 LEAN PRO machine we have for sale. Contact us for further details. Ibsdpfx Abey Hi T Heroa TECHNICAL SPECS:- Centre height: 175 mm (6.9") - Centre distance: 00 mm (39.4")- Longitudinal slide Max. travel: 50 mm (41.4")- Longitudinal slide Speed (vt): ,000 mm/min (394 ipm)- Longitudinal slide Resolution: mm (.000.004")- Maximum table swivel (Centre distance 00): 8.5 degrees- Wheelhead slide Max. travel: 275 mm (.8")- Wheelhead slide Speed (vt): ,000 mm/min (394 ipm)- Wheelhead slide Resolution: mm (.000.004")- Max. workpiece weight between centres: 130 kg (286 lbs)- Max. load moment (Mmax): 160 Nm (116 ft lbs)- Workhead: Non-swivelling, Roller bearing, AC-Servodrive - Workhead Option: Camlock Adapter - Tailstock Fitting taper: Morse 3 - Tailstock Travel of barrel: 35 mm (1.37")- Control Unit: Fanuc Series 16 (32-Bit processors, ISO and pictogram programming)- Wheelhead Variants: Turret wheelhead U left 400x80 mm Turret wheelhead U left 500x80 mm Grinding wheel right 400x40 mm Grinding wheel right 250x25 mm- Internal grinding attachment: For belt driven spindles Ø0 mm - Max. grinding length (Ls): SPW + b - 80 mm - Max. diameter with three-jaw chuck (ØF): 129 mm - Max. diameter with closed steady (ØL): 140 mmHours: 47.550Condition: Well maintained*The internal grinding spindle has not been in operation for a long time because it was disconnected due to a fault in the frequency converter.

Condition: good (used), Year of construction: 1981, operating hours: 16,769 h, Center height 175 , Center width 700 , Angled position of turntable 10° , Workhead swiveling 90° , Speed range 30-675 rpm , Isdpetz T H Dsfx Abrjba Morse 5 , Grinding headstock _ grinding wheel diameter 400 , largest width 50 , drive power 6,25kW

Condition: good (used), Year of construction: 2000, Universal Cylindrical Grinding Machine Studer S30 leanPRO Studer S 30 Year of manufacture: 2000 Operating hours counter Regular maintenance intervals by manufacturer (last service 11/25, report available) Wheel change: according to manufacturer intervals Hydraulic inspection: annual check Backup battery replacement: included in Studer maintenance Control system: FANUC 16 T Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 125 mm Distance between centers: 650 mm Optional grinding cycles for increased center height Table adjustment: 11° Ijdjyx Hgzspfx Abrjba Glass scale on X / Z axis Paper band filter unit Workpiece headstock: approx. 1-1,000 rpm Internal grinding attachment with accessories LED spotlight with flexible arm Grinding wheel: 400x80 mm Frequency converter for external grinding spindle Grinding wheel flange Bore diameter: 127 mm Frequency converter for internal grinding spindle Workpiece weight: approx. 80 kg Workpiece support with live center and MK 4 Workpiece headstock: MK 5 taper Tailstock: MK 3 taper Quill stroke: 40 mm Machine weight: approx. 3,400 kg Installation dimensions (LxW): 2,300x1,550 mm Machine height: approx. 2,000 mm Electrical supply Digital linear measurement system Coolant supply with fleece filter, tank capacity 300L Operating hours counter, control ON: 35,978 h

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Ijdpjw T Sd Tofx Abroba Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.