Vertical Turret Lathe - Single Column

STANKO 1525 / 2008

Condition: used, Technical details: turning diameter over bed: 1200 mm turning diameter over support: 800 mm turning length: 3200 mm length of gap: 600 mm center height measured in bed: 600 mm turning dia. in gap: 600 mm spindle turning speed - continuous: 4,6-545 / 22 steps U/min spindle passage: 90 mm feed: 1,4-510 m/min taper: MK6 total power requirement: 15 kW weight of the machine ca.: 10,0 t dimensions L x W x H: 6,20x2,00x1,80 m Lhsdpfx Aezuyfaedcon dimensions electric cabinet LxWxH: 0,55x0,33x1,0 m equipped with: face chuck diameter 1000m (4 jaw chuck) fourfold chisel taper steady rest closed, inside diameter 250mm revolving tail center conical turning device *

Condition: good (used), Manufacturer: STANKO Type: 7D430 Lhsdpfxswpud As Adcen Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Lubrication Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Width 2200 mm Height 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details.

Condition: good (used), Year of construction: 1979, Single column vertical turning lathe BERTHIEZ TM500 SP Lhjdpsx A U Raefx Adcsn Manufacturer: Berthiez (France) Model: TM500 SP Year of manufacture: 1979 Main technical data: Table diameter: 6300 mm Maximum turning diameter: 15000 mm Maximum usable height: 4000 mm Arm travel: 3600 mm Main motor power: 100KW Maximum allowable load on faceplate: 80 t Ram size: 360x360 mm Machine weight: approx. 230 tons The machine is capable of both turning and milling operations. Do not hesitate to contact us for any additional information.

Condition: used, Year of construction: 1980, turning diameter over bed 1930 mm turning diameter over slide rest 1520 mm turning length 5000 mm turning speeds 0,5-250 U/min spindle bore 105 mm workpiece weight 35 t steady 400-700 mm steady 700-1200 mm Lodpfxjyutp Ho Adcehn steady 1000-1600 mm control Siemens total power requirement 106 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA Ledpfxortrvyj Adcjhn -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: excellent (used), Year of construction: 2008, Siemens Sinumerik 840 D, 5 axes controlled. Wheel diameter max 2000 mm 700 mm wheel width Machine weight 35,000 kg Space requirements approx. 6.9 x 8.4 x 3.7 m Ljdpfx Adeza Egbjcohn

Condition: used, grinding diameter / mm grinding length 4000 mm Ledjzgipxjpfx Adcohn swing diameter / mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 11903, grinding length: 5,200 mm, grinding wheel diameter: 660 mm, grinding diameter: 1,600 mm, grinding wheel width: 50 mm, spindle speed (max.): 30 rpm, spindle speed (min.): 5 rpm, Churchill Roll Grinder Swing 1600 mm Centres 5200 mm Cambering Wheel Size 26” x 2” Roll speeds 5-30 rpm Bed and table were re-ground and not much use since so both are perfect. Lodpsxvrptsfx Adcjhn

Condition: ready for operation (used), Year of construction: 1993, swing diameter 1400 mm faceplate diameter 1500 mm Control Sinumerik 850T work height max. 1400 mm Ledpjvxa Tpofx Adcjhn Tool changer 12 stck. workpiece weight 5 t YEAR OF CONSTRUCTION: 1993 Mechanical overhaul: 2010

Condition: used, Control system: Siemens 3-T Faceplate: 1500 mm Lhjdpfx Aezl D Rhedcon Max. turning diameter: 1800 mm Max. turning height: 600 mm X-axis travel: 1995 mm Z-axis travel: 750 mm Faceplate speed: 260 RPM Main motor: 66 kW Milling motor: 31 kW Milling spindle speed: 3000 RPM Tool changer: 26 positions Machine is disassembled. Many tools and spare parts included.