Single Column Press - Hydraulic

SCHOEN UNH-700

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Rcsdpfx Adsx Ii Hveqod Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Rcsdpfxohcnhme Adqod Motorized tank/boiler turning device with rail-mounted chassis Technical data: - Total load capacity, driven + follower unit: 40,000 kg - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Year of construction: 1978, condition: used, pressure 100 t throat 380 mm stroke 400 mm power capacity 22 kW dayligth 600 mm ram surface 600x500 mm table surface area 720x600 mm weight of the machine ca. 9 t Rjdelp U Dpopfx Adqscd

Condition: good (used), Year of construction: 2022, Offer 26133 Rcodpfxozcdcas Adqsd Technical data: - Length 4000 mm - Width 2000 mm - Plate height 200 mm - Wall thickness 25 mm - Hole diameter of the perforations approx. 28 mm - Hole spacing of the perforations, table top, approx. 100 x 100 mm - Hole spacing of the perforations, side panel, approx. 100 x 50 mm - Table height approx. 850 mm - Table height adjustable - Total weight approx. 2400 kg

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Rcsdpfst Awm Dex Adqjd Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Rcedod Swtaopfx Adqsd Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Rsdpfsx Sr Dfsx Adqjcd Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: used, Year of construction: 2002, fuel type: gas, Number of working hours 3184 h weight max. 8 t weight of the machine ca. 13400 kg Rsdpfxewx R T Ee Adqjcd

Condition: used, Year of construction: 1986, pressure 160 t throat 360 mm stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec Rodpjv Rgwxofx Adqjcd max. distance table - ram 1000 mm table surface area 900 x 630 mm ram surface 850 x 450 mm clamping pivot 50 H7 / 85 mm total power requirement 17 kW weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 0,185 t range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm Rcsdpfot U R H Uox Adqjd total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically