Universal machining center

Reiden RX 14

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° Ljdpswp D Nbofx Ab Esri rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: good (used), Year of construction: 2016, Table size 3000 x 1700mm, Traverses X Y Z 3200 x 2100 x 920mm, Table load 11,000kgs, spindle nose to table 164 – 1084 mm, spindle bored Din 50, spindle speed 6000 rpm, 40 station ATC, Hurco Winmax 5 control. swarf conveyor Lrjdowu Dlaopfx Ab Eoi

Condition: as good as new (ex-display), Year of construction: 2023, Control : Heidenhain TNC 640 Travels X : 1,020 mm Travels Y : 520 mm Travels Z : 610 mm Clamping surface (L x B) : 1,160 x 520 Table load : 750 kg Spindle Speed : 15,000 rpm direct Tool holder: SK40 (BigPlus) DIN69872 In general Tool changer : 30-stations Machine bed : Meehanite cast Repetitive accuracy : 0.008 mm Equipment Chip conveyor Lodpfx Ast Dizvsb Ejri Coolant supply Elect. handwheel high pressure coolant

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Lrjdpfx Abeym Nfhj Eoi Year of construction: 2011 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: SK 50 Numbers Of Tools In Magazin: 60 Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Travel paths X/Y/Z: 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Lodpfx Asynw Ereb Eeri Internal coolant supply 40 bar Chip conveyor Heidenhain measuring probe Blum laser system

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. The operating hours clearly indicate: Control ON: 30,064 h Lrjdpfox D Ux Tex Ab Eoi Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

Condition: used, Year of construction: 2012, Used 2011 YCM NDV102A Vertical Machining Centre. Supplied with 12,000 RPM Spindle, 30-station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: - X Axis: 1,020 mm - Y Axis: 600 mm - Z Axis: 600 mm - Spindle Nose to Table (~ max): 700 mm - Spindle Nose to Table (~ min): 100 mm​ TABLE: - Length: 1,120 mm - Width: 650 mm - T-Slot Width: 18 mm - Number of Std T-Slots: 6 - Max Weight on Table (evenly distributed): 1,000 kg​Machinery Resources International SPINDLE: - Max Rating: 15 kW (20 hp) - Max Speed: 12,000 rpm - Drive System: Direct Speed Belt Drive - Taper: Big Plus BBT40 - Bearing Lubrication: Oil Injection Ljdpfowfdzcsx Ab Ejri - Spindle Chiller FEEDRATES: - Rapid and Jog (Max.): 24 m/min AXIS MOTORS: - Axis Motor Rating X/Y/Z: 2.29/2.29/3.3 kW​ TOOL CHANGER: - Type: Side mount - Capacity: 30T - Max Tool Diameter: 76 mm - Tool Length Max.: 300 mm - Tool Weight Max.: 6 kg - Tool Change Time: 2.5 sec​ GENERAL: - Air Required: 78.2 psi/min - Power Supply: 400 V / 3 Phase - Coolant Capacity: 360 L - Machine weight 7,000kg Control: Heidenhain TNC i530 Spec: Travel X1020 Y600 Z600 mm | 12000RPM | BBT40 Accessories: Through spindle coolant, hi torque spindle motor, 30 tool side mount ATC

Condition: good (used), Year of construction: 2021, Matec HV 700, Year of manufacture: 2021, Heidenhain TNC 640 control system, X/Y/Z travel 2600/700/950 mm horizontal, X/Y/Z travel 2600/700/950 mm vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, ICS 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electronic handwheel, Dynamics package, Software Kinematics Option, Lrsdpeyctf Dofx Ab Eoi Measuring probe, Partition wall, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours,

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V Lsdeu N Avxopfx Ab Eori total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: like new (used), Year of construction: 2012, operating hours: 24,864 h, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: Heidenhain iTNC 530, workpiece diameter (max.): 380 mm, workpiece weight (max.): 2,500 kg, total height: 2,480 mm, total length: 1,970 mm, total width: 2,730 mm, overall weight: 6,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2012 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 400 Y-axis travel mm: 400 Z-axis travel mm: 375 C-axis degrees: 360º (0,001) B-axis degrees: -5º / +110º Distance spindle nose - table surface mm: 125-500 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Milling/turning table nc: Table dimensions mm: 450x400 Maximum workpiece size (D x H) mm: Ø380 Max. workpiece weight kg: 250 Table rotation speed rpm: 1200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center bar: 40 Tool system Tool holder: HSK-A 63 Lrodpjyi Am Djfx Ab Esi Tool magazine slots: 30 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter 3D quickSET Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 46650 Spindle Working: 24864 Rated power kVA: 46 Basic machine dimensions / weight Length mm: 1970 Width mm: 2730 Height mm: 2480 Weight kg: 6900