Process water treatment unit

Rösler Centrifuge Z 1000

Year of construction: 2017, condition: good (used), functionality: fully functional, -KOM 3036- Offered here is an ABUS gantry crane with a maximum lifting capacity of 250 kilograms per crane hoist. This gantry crane has a total of three cross bridges. Type: free-standing gantry crane system Manufacturer: Abus Year of construction: 2017 Number of cross bridges: 3 Length travel drive: manual by hand Cross travel drive: manual by hand Lifting capacity per crane hoist: 250kg Number of vertical supports: 8 Power supply: longitudinal and transverse power rails Guedpfx Ahsvw Acdj Uji Travel paths - usable area Length: approx.: 17,000mm Width: approx.: 5,000mm Hook height: approx.: 3,800mm Room dimensions / external dimensions Length: approx.: 17,500mm Width: approx.: 5,600mm Height: approx.: 4,900mm

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: KBK FFM, DEMAG KBK 2 - crane sky crane runway indoor crane Pictures shows an example crane runway with the below components. These are also available individually! Gujdjmmbn Tjpfx Ah Uji Please ask your crane runway about your dimensions Payload / lifting capacity from 80 125 250 500 to 1000 Kg KBK 2-R turnouts left and right (with conductor rail) KBK 2-R swivel discs 890mm (with conductor rail) KBK 2-R rails curved 15 30 45 60 90 degrees (with conductor rail) KBK 2-R rails (with conductor rail) The system can be delivered completely according to your wishes Rails, rail connectors, trolleys, end plates, drag cables, holders/hangers, accessories are available Chain hoists on request Very good, almost new condition Shipping by forwarding possible Demag KBK1 KBK2 and KBK3 rails are stock items!

Year of construction: 2010, condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Gedpfxerbiyfs Ah Uoui Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.