Horizontal machining center

QUASER HX404BP/15C

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 77626220, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Crysta-Apex V574 Multi-Wire This is a compact 3D CNC coordinate measuring machine offering outstanding performance and economical operation, delivering high precision in various environments. It is ready for tactile measurement, tactile scanning, and optical measurement, including laser scanning. Advantages: • Proven bridge-type construction with highly rigid air-bearing guideways on all axes • Superior accuracy • High traverse speed and acceleration • Temperature compensation function for ranges between 16°–26°C, covering the workpiece as well (with 2 contact sensors) • Extended-range ABS scale tolerant of operating conditions • New UC480 controller with service monitor Technical details: Itedpfsy R Ey Rsx Acdeh Measuring range: • X = 500 mm • Y = 700 mm • Z = 400 mm Accuracy (temperature 16°–26°C, as per ISO 10360-2:2009, L = measured length in mm): • With SP25M: E0, MPE = (1.7+3L/1000) µm • With TP200: E0, MPE = (1.9+3L/1000) µm • With TP20: E0, MPE = (2.2+4L/1000) µm Dynamic performance (combined 3 axes): • Max. traverse speed = 519 mm/s • Max. acceleration = 2309 mm/s² Machine dimensions and weight (including stand): • Width = 1082 mm • Length = 1548 mm • Height = 2185 mm • Weight = 691 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, MCOSMOS with GEOPAK module (CAD-assisted evaluation). Software - MCOSMOS 3 CNC V4 Equipment: PH10MQ probe head (incl. FCR25 quick-change rack). Itjdpfjx H Nn Rjx Acdeh SP25M scanning probe system with 5-piece probe module set. MCOSMOS 3 CNC V4 incl. dongle (Wibu-Box). CAT1000PS V4 (CAD comparison and evaluation). Software upgrade MCOSMOS-1 from V2 to V4. GEO-EDM add-on module for eroded parts. Part-program generator and GEO-EDM assistant.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 1,800 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 650 mm, workpiece weight (max.): 180 kg, We are selling a refurbished Wenzel WGT350 XL rack and pinion measuring machine. The machine can be used to measure gears and racks. - Max. Rotary table workpiece diameter = 5 to 400mm - Max. Rotary table load = 180kg - Travel X= 1800mm Y=200mm Z=650mm - Counterholder measuring range = 20 to 900mm - Module measuring range from 0.5mm - Max. Max. rack length = 1200mm - 6x probe changer incl. 6x SP600M plates - Temperature compensation of the machine - Active air damping of the machine - Year of manufacture 2006 - Accessories such as, driver, reference ball etc. as shown - Jaw chuck D=200mm with inside and outside jaws The following software modules are included: - TMain - program management - TStylus - Probe management - TCali - probe calibration - TAmo - Calculated axis position determination - TGear - Cylindrical gear measuring program - TShaft - Program for dimension, form, position and scanning of unknown contours - contours - TWorm - Worm measuring program - TRack - Rack software - TReverse - The parameters of an unknown gear, module (mn), helix angle (ß) and pressure angle (a), can be determined with TReverse. can be determined. Iedpfx Acsvitkiodeth - Statistical program, statistical evaluation for spur gear, bevel gear and worm gear testing. worm testing For further information, please contact us by e-mail.

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Max. turning length 1498 mm Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach Ijdpfxsy Spuue Acdoth total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Standard Specifications of the Machine Table: Working area: 305 x 305 mm Max. workpiece volume: Ø 500 mm x 560 mm Max. table load: 250 kg Travel: X-axis: 510 mm Y-axis: 510 mm Z-axis: 490 mm Rotary axis: 0.001° – 360° Distance table top – spindle center: 40 - 550 mm Isdpfxew Al Tbo Acdjth Distance table center – spindle nose: 100 - 590 mm Spindle: Spindle taper: NST No. 40 Spindle speed: 20 – 20,000 rpm Drive: 4-step gearbox (2 mechanical, 2 electric) Max. torque: 157 Nm Feed: Rapid traverse X, Y, Z-axis: 50,000 mm/min Rapid traverse 4th axis: 9,000°/min 90° rotation of 4th axis: 0.6 seconds Cutting feed X, Y, Z-axis: 40,000 mm/min Tools: Tool positions: 40 Tool selection: direct, bi-directional Tool holder: BT (SK) 40 Max. tool diameter: 95 mm (150 mm if adjacent positions are empty) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.7 seconds Tool change time (chip-to-chip): 5.0 seconds Motors: Spindle motor (30 min./continuous operation): 11.0 kW AC Tool changer motor: 400 W AC Coolant system motor: 1,200 W AC Pallet: Pallet change time: 6.0 seconds Other: Power supply: 25 kVA, 200V AC, 3-phase Air supply: 5 bar, 330 l/min Dimensions: Machine height: 2,940 mm max. Footprint with chip conveyor: 3,492 mm x 3,173 mm Weight: 9,900 kg Control: Fanuc 16iMB Standard Accessories Spindle with 20,000 rpm and 4-step gearbox (2-speed gear drive, 2-speed electronic gear) 2-Point spindle bearing compensation within 0.005 mm (IAC System 1) Big-Plus spindle (contact in taper and face) Automatic spindle taper cleaning with compressed air Through-spindle coolant at 15 bar with separate pump Spindle bearing lubrication system (air-oil mixture) Spindle cooler Automatic lubrication of axis ballscrews in X, Y, and Z axes Automatic high-speed tool changer with 40 tool stations Fixed tool position: each tool is independently coded by the machine and identified in the magazine Original Kitamura tool wait-release function via pre-selection of the T-code Automatic 180° pallet changer (2 stations) Coolant pump 1,200 W Double-deck chip conveyor with 2 chip belts for coarse and fine chips, with filter system Lower chip flushing with separate 1,200 W pump Fully enclosed guard Automatic central lubrication of guideways Air FRL unit (filter, regulator, lubrication) Hydraulic power unit with tank Work light Cycle end lamp Tapping without compensating chuck 4 free M-functions, M20 – M23 Swiveling control panel Portable handwheel RS 232C interface PCMCIA interface Door interlock Emergency stop at tool magazine Manual index switches at tool magazine Self-diagnostic function

Condition: used, external diameter 400 mm internal diameter 127 mm width 45 mm unused gear grinding wheels from a Hoefler machine! Iedpfx Aeu Sbguocdjth Price per piece for detailed info, see photos!

Condition: new, Year of construction: 2024, functionality: fully functional, turning diameter: 51 mm, The machine is a new storage machine. STANDARD EQUIPMENT main spindle 15KW, 4.000 rpm with Mitsubishi M830 control with 4 cross slides on the main spindle with an 8-fold servo turret VDI30x55 all stations can be used for red. WZG central milling drive 3.3 KW, 3000 rpm incl. stable polygon turning function (without tool holder) with full C-axis on the left spindle and on the pick-up spindle with 48-position spindle lock for support during routing Including pick-up spindle with workpiece collecting tray and finished part conveyor belt for falling cut-off parts or remnants With swiveling finished part conveyor belt for finished part unloading after rear side processing 4 tool holders for rear side with programmable KM high pressure for clamping device cleaning before the next workpiece transfer with HD-KM pumps, 70 bar with separate coolant tank (180 liters) with handwheel Coolant and hydraulic pumps Bar feeder interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring at all stations Control cabinet with air conditioning unit 3-fold signal lamp The machine is also equipped with a turret for back machining. Iodpfoug Up Nsx Acdsth This is only designed for fixed tools. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming pad for Lico machines Color Door RAL 7015 slate gray Chip tray/frame RAL 7024 graphite gray Housing RAL 7035 light gray

Condition: good (used), Year of construction: 2001, Fanuc control Box type guideway structure Clamping tower on pallet Machine is stocked in our Bulgaria showroom IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! Itsdsnyh Sfopfx Acdeh You are welcome to contact us for your further questions CNC World Machine LTD

Condition: good (used), Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, CNC control Mitsubishi M70 Itsdpfjth Razjx Acdjh pallet changing device 4. axis (dividing head) 24-fold automatic tool changer coolant through spindle device chip conveyor Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 400 mm Z-Weg / Z-travel 500 mm Spindelaufnahme / spindle taper SK40 Drehzahl / spindle speed 12000 UpM /rpm Tischaufspannfläche / table clamping area 2x 700x400 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebsleistung Spindel / drive capacity spindle 7,5 kW Gewicht ca. / weight 6600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki MV-40B/40 Machining center is immediately available and inspection under power is possible; the condition is very good. We also offer on-site commissioning. Itedpfx Aoy Hrapecdjh - 4 axes - Niken CNC-200 FA rotary table - multiple SK 40 tool holders - spindle internal cooling (IKZ) - Knoll system - extraction unit - FANUC 16M control