Double Column Drawing Press -Hydr.

MUELLER ZE 630 - 25.102.1

Condition: good (used), We sell a used robot grinding machine. The plant is in good used condition. Dkjdpeh T Durefx Abreg Included in the plant are: - 1x KUKA KR30-3 industrial robot - 3x belt grinders - 1x loading table If you have any questions, please do not hesitate to contact us!

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale Dsdpfxjhcnxro Abrjkg

Year of construction: 2006, condition: refurbished (used), HYDRAULIC PRESS MECAMAQ PRESSURE 350t STROKE 350mm TABLE LEFT RIGHT 600mm TABLE FRONT BACK 750mm POWER 15kw Dkjdpfx Abjfmqqlersg Dimensions: Height: 2,9m Width: 1,9m Length: 1,3m Weight: 5.700 kgr

Condition: like new (used), Year of construction: 2017, TRUMPF TruDisk 5001 (6C) * MFD 2017, as-new condition * laser power: 5 kW * wavelength: 1030 nm * beam quality: 4 mm mrad * beam switch for 4 fiber exits, min. fiber diameter: 100 µm * fiber connector: LLK-D Dkjdpfx Abeqfguaorsg * option: field bus interface & IIO3-card * 2 identical lasers available

Condition: good (used), Year of construction: 2000, total height: 47,000 mm, total width: 27,000 mm, total length: 25,000 mm, table width: 1,000 mm, table length: 1,800 mm, overall weight: 43,000 kg, ram plate width: 600 mm, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Djdpfx Ajtiwgisbrekg Light barrier Sick Separate control cabinet Ritta Side passages Ground level installation

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 Djdpfxob U Hwte Abrekg clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Dkodpfx Ajfz Anpebrjg Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2009, condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece Dkjdpfodq U S Iox Abrog -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Condition: refurbished (used), Year of construction: 2020, pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm ram surface:1100 x 800 mm Daylight Opening:800 mm Hydraulic:300 bar closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm Dedpoffamvjfx Abrekg workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. number of driving cylinders:2 St. :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Safety control:PILZ Multi

Condition: used, Year of construction: 1991, pressure 500 t distance between columns 1910 mm stroke 500 mm Distance table/ram, max. stroke up, adjustment up 700 mm table surfache without cutting impact cushions 1910 x 1360 mm table surfache with cutting impact cushions 1600 x 1360 mm table height over floor 800 mm ram surface 1600 x 1270 mm Side window 600 mm Dksdpjvuuiqjfx Abreg speed down 400 mm/s speed up 330 mm/s working speed 10 - 28 mm/s oil volume 1200 l power requirement 60,0 kW weight 40,0 t Dimensions (WxDxH) 3,6 x 2,5 x 5,0 m height over floor 4,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, cutting impact cushioning, two-hand operation table size depending on cutting impact devices: - without approx. 1910 x 1360 mm - with approx. 1600 x 1360 mm can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F