Hydraulic Press

Schuler EB 2-500

Condition: ready for operation (used), Year of construction: 1969, functionality: fully functional, machine/vehicle number: 70-10 6840, table width: 2,750 mm, table length: 1,500 mm, pressing force: 500 t, distance table to ram: 1,000 mm, stroke length: 850 mm, Refurbished eccentric press including robot and mold carriage TECHNICAL DETAILS Press force: 500 t Stroke: 850 mm Stroke rate: 12 - 24 rpm Adjustability: 325 mm Stand spacing: 3250 mm Table area: 2750 x 1500 mm Nsdpfxewcn H Rj Af Sodf Ram area: 2750 x 1500 mm Distance between table and ram: 1000 mm Compressed air pulling device in the table Force at 6 atm: 140 t Stroke: 250 mm Ejector in the ram Force at 6 atm: 46 t Stroke: 150 mm

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm Njdpfxeb U Hwts Af Sodf ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: used, Year of construction: 2004, Pressure 630 t stroke 800 mm Nedpfxsv Svars Af Sedf distance between columns 2600 mm Distance table/ram, max. stroke up, adjustment up 1500 mm Table surface area 2500 x 1300 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Ram surface 2500 x 1300 mm Side window 1040 mm feed down 600 mm/s feed up 360 mm/s working feed 14 - 42 mm/s power requirement 145,0 kW Weight 85,0 t dimensions (WxDxH) 4,2 x 4,0 x 7,8 m height over floor 6,80 m height beneath floor 1,0 m Demonstration machine from technical university with approx. 920 operating hours! Mint condition! permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, upper and lower stroke limitation, light-guard (Sick) on front and back, hydraulic drawing cushion in table with ejector function, hydraulic cutting impact cushioning, mechanical depth stop via 4 motor-adjustable spindles, hydraulic ram interlocking, two-hand operation 2 tool changing consoles, 4 hydraulic ball roller tracks, 4 dampening elements

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 150 359 - 11683, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. Ndodjt Ucpbjpfx Af Sef The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Inquire by phone or email!

Condition: used, Year of construction: 1993, pressure 160 t throat 400 mm stroke 20 - 160 mm table surface area 1200 x 800 mm ram adjustment 100 mm no. of strokes 60 Hub/min ram surface 860 x 520 mm total power requirement 15 kW weight of the machine ca. 16 t dimensions of the machine ca. 1,7 x 2,5 x 3,23 m - Additional clamping plate - cross-grooved - Foot switch - Hydraulic clutch - Hydraulic ball screw clamp - Hydraulic overload protection - Flywheel brake - Hydraulic system with oil cooler Ndedpfjtqm Dfox Af Sof

Condition: used, Year of construction: 2009, functionality: fully functional, The basic Müller machine was put into operation in 1972. In 2009 it was completely overhauled by the Dunkes company. You will receive further information by e-mail. Dismantling and collection must be carried out by the buyer. Sale without guarantee or warranty and return as it is a used machine. The press is in daily use and can be inspected. Nsdpsvb Hhlofx Af Ssdf

Condition: used, Year of construction: 1984, Pressure total: 600 ton Ram stroke: 762 mm Slide adjustment: 406 mm Shut height (stroke down, adjustment up): 1322 mm Free frontal opening L-R: 3700 mm Table surface area : 3350 x 2134 mm Slide area: 3350 x 2134 mm Die cushion capacity in table: 180 ton Die cushion stroke: 305 mm Ejector in ram: 60 ton Ejector stroke in ram: 230 mm Number of strokes: 16 s.p.m. Required power: 90 kW Weight of machine approx.: 185 ton Ndodpsuqdizjfx Af Ssf Standard configuration Cushion in table pneumatic Extended machine accessories die loading charts for tool changeABB Handling robots for loading and unloading presses

Year of construction: 2011, condition: ready for operation (used), Working surface: 2800x1600mm, swing angle: 90°, parallel stroke: 150mm, clamping force: 700kN, connected load: 50kW, including documentation. Ndsdpfxjh Nm S Ho Af Sef

Condition: ready for operation (used), Year of construction: 1955, An Eumuco screw forging press (Screw-Press) is available. Forming stages: 2, press force: 1250kN, hold-down force: 2500kN, stroke rate: 80rpm, ram stroke: 140mm, hold-down stroke + punch: 100mm, table dimensions X/Y: 680mm/680mm, ram dimensions X/Y: 680mm/680mm, drive power: 35kW. On-site inspection is possible. Nsdpfxowm Nm Tj Af Sedf

Condition: ready for operation (used), Year of construction: 1964, Forming stages: 3, press force: 6500kN, stroke rate: 110rpm, ram stroke: 180mm, working range X/Y: 600mm/800mm, table dimensions X/Y: 800mm/1000mm, ram adjustment: 10mm, drive power: 37kW. On-site inspection is possible. Ndodjwm Nm Hjpfx Af Sof