Machining center

Mikron HSM 400 U

Condition: used, condition Defekt/Ersatzteilträger manufacture Mikron Pjdpfx Asyzt A Uogmegp type HSM 400 U The machine is defective and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Pedpjxf E Twofx Agmjgp Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller model: iTNC Heidenhain 530, spindle speed (max.): 42,000 rpm, swivel angle C-axis (max.): 360 °, number of axes: 5, No minimum price – guaranteed sale to the highest bidder! The lot consists of 2x 5-axis HSC machining centers and pallet system with robot MIKRON HSM 600 U (serial number: 217.88.00.070) TECHNICAL DETAILS Travel X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / –110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Torque (max.): 217 Nm max. Clamping torque: 1,400 Nm B-Axis Swivel range: +30° / –110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load capacity: max. 120 kg Tool magazine: 68 stations Control: Heidenhain iTNC 530 Workpiece weight: max. 120 kg EQUIPMENT Rotary tilting table with Erowa UCP MIKRON HSM 400 U (serial number: 217.87.00.178) TECHNICAL DETAILS Travel X-axis travel: 400 mm Y-axis travel: 240 mm Z-axis travel: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: ±110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Podpfx Asx Hx T Aegmsgp Rotational speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): 217 Nm max. Clamping torque: 500 Nm B-Axis Swivel range: ±110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): 686 Nm max. Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load capacity: max. 25 kg Tool magazine: 36 stations Control: Heidenhain iTNC 530 EQUIPMENT Rotary tilting table EROWA ROBOT MULTI TWIN Gripper station: 6 stations Grippers: various Storage system Rotary storage: 5 levels Level allocation Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 GENERAL EQUIPMENT Absolute measuring systems on all axes Infrared touch probe LASER Electronic handwheel for setup mode Graphite dust extraction 2x BURN WK 5806 Rotary pallet storage

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, table load: 10,000 kg, spindle speed (max.): 6,000 rpm, table length: 1,800 mm, table width: 1,800 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, LAGUN TM 4 T-frame traveling column milling center The LAGUN TM 4 is a highly stable T-frame traveling column milling center for heavy and precision machining. Ideal for single-part production as well as series production with the highest demands on rigidity, accuracy, and reliability. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust design, high dynamics, and decades of experience in the construction of bed-type milling machines. The machines are impressive due to their high reliability, ease of maintenance, and economical operation. Technical equipment: Control system: HEIDENHAIN TNC 7 control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 60-position chain magazine with dual gripper Chip disposal: 2 x hinged belt conveyors (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positional accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create an individual offer. Pjdpfxjq I Nkbs Agmjgp

Year of construction: 2004, condition: good (used), A used, well-maintained double miter cold circular sawing machine from KASTO, model: “KASTOdisc A10” - Fully automatic operation - Single cut - Hydraulic clamping cylinders - Central lubrication for saw guides - Coolant system - Documentation Saw blade diameter 350 mm Cutting range: Round 90°/45° 100/100 mm Pjdpfxekfvhkj Agmogp Square 90°/45° 100x100/100x100 mm Rectangle 90°/45° 170x100/130x100 Shortest remaining piece length in single cut at 90°: 30 mm Shortest remaining piece length in automatic operation at 90°: 260 mm Working height 950 mm Dimensions (W x D x H) 1530x1348x1890 mm Weight 980 kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Pgedpox N Atfefx Agmop

Condition: good (used), Year of construction: 2006, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 12,000 rpm, We offer you: Manufacturer: MORI SEIKI Pgodpfjxxraqjx Agmsp Model: NT 4200/1000S Year of manufacture: 2006 Control: MITSUBISHI M-720BM (MAPPS 2) Technical Data: Turning length: 1,000 mm Bar capacity: max. 65 mm Main spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Counter spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Milling spindle: Speed range: 0 – 12,000 rpm Tool interface: Capto C6 Number of tool positions: 100 Hollow chuck: Ø 67 mm Operating hours: approx. 27,000 h Spindle hours: approx. 16,100 h Technical features and equipment: - Y-axis - Fully indexable B-axis - Chip conveyor, discharge to the right - Standard coolant system - Interface for high-pressure coolant system, 70 bar - Tool spindle with through-coolant - Coolant spray gun - Air blast through counter spindle - Manual tool presetting on the main spindle - 3-color signal light - Double foot switch - Simultaneous 5-axis machining - Automatic power shut-off - Tool offset for 5-axis machining - Programmable data input - Dynamic diameter/radius exchange - Stroke check before movement Operating hours: 26,875 h (as of 22.08.25) Spindle hours: 16,093 h (as of 22.08.25) Accessories, illustrated tools, and clamping devices are only included if explicitly specified in the additional information. Subject to change and error in technical details and specifications. Prior sale reserved!

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 1 MAIN SPINDLE - Max. bar diameter : 23 [mm] Pgsdpfx Ajvh I Ugsgmep - C axis indexing precision : 0.001 [°] TURNING-MILLING SPINDLE - X/Z stroke : 250/300 [mm] - Y stroke : 200 [mm] - B Axis stroke : -15/+100 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK E40 - Spindle speeds : 30000 [rpm] - Spindle power : 10 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine weight : 1700 [kg] EQUIPMENT - CNC : NUM 1050 - Coolant tank * Coolant through spindle - Oil mist extractor : Elbaron RON/A 60 - Cooling unit : MARKSA CSW100 - Unit for 6th face machining - Bar loader : Willemin - Collet chuck

Condition: used, Year of construction: 2007, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, overall weight: 8,300 kg, Mikron HSM 800 – High Speed Machining CenterYear 2007 | Heidenhain iTNC 530 | 24,000 rpm | 3-pallet changerHigh-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC applications such as mold & die, graphite and electrode machining, as well as flexible production.Travels: X 800 mm / Y 600 mm / Z 500 mm with pallet size 800 x 600 mm. Equipped with a 3-pallet changer for efficient automated operation.The machine features a high-speed spindle up to 24,000 rpm with HSK-A63 interface and a 50-position tool magazine.Well equipped with high-pressure through-spindle coolant (18–70 bar) including band filter system, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating viewing window and probing system (M&H).Additional features include APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process stability and thermal accuracy. Weight approx.: 8,300 kg Control: Heidenhain iTNC 530 Podpfx Agey Tkc Aemegp Dimensions of the clamping surface: 900 x 600 mm Travel Y-axis: 600 - mm Dimensions (LxWxH) approx.: 3000 x 2500 x 2800 mm Travel Z-axis: 500 - mm Travel X-axis: 800 - mm Year of construction: 2,007 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Pgsdpfx Agsx Tdyzsmjp Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.