Matsuura tool magazine

Matsuura

Condition: good (used), Year of construction: 1998, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total length: 1,150 mm, total width: 510 mm, 3-axis CNC machine (VMC) Matsuura - MC-1000 VG X - Travel: 1020mm Y - Travel: 550mm Z - Travel: 510mm Table Length: 1150mm Table Width: 510mm Feed rate X-Axis:15000mm/min. Feed rate Y-Axis:15000mm/min. Feed rate Z-Axis:15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:30kW Hfjdpfx Afewvhvfe Usg Speeds / ranges:15000Rpm ATC / revolver: 30 Chip conveyor: yes Length: 2800mm Width: 2500mm Height: 2800mm Weight: 6800kg

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Hodolz Rvljpfx Af Usfg Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1993, 2 pallet changers and 4th axis Year of manufacture: 1993 X-travel: 1,020 mm Y-travel: 560 mm Z-travel: 400 mm Table-to-spindle distance: 550 mm Control: Yasnac M80 Table size: 1,200 x 660 mm 2 pallets: 1 pallet with 2 Chick clamps – 1 pallet with 4th axis Tsudakoma RNCV201 Table load: 600 kg Tool holder: SK 40 Rapid traverse X-Y axes: 25,000 mm/min Rapid traverse Z: 15,000 mm/min Spindle speed: 200–20,000 rpm Motor power: 11/15 kW Tool magazine: 40 Internal coolant supply: 20 bar Hfsdpfx Afewxbg Ao Uog Coolant tank Timer Scraper conveyor Renishaw probe Spindle cooler Air cooler Electronic handwheel Machine weight: 9 t Required space: approx. 7 m x 4.5 m x 2.85 m Total power requirement: 40 kVA

Condition: used, Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 400 kg, total height: 2,640 mm, total length: 5,870 mm, total width: 3,440 mm, overall weight: 11,300 kg, table length: 500 mm, table width: 500 mm, rotational speed (min.): 15,000 rpm, Equipment: documentation/manual, Horizontal machining centre CNC Control Matsuura G-tech 16i Hsdpsy N Awdsfx Af Uefg Pallet table size 500x500 mm Movement X-Y-Z-Axis 600x600x600 mm Magazin capacity 240 Number of pallets: 6 Table load 400 kg Spindle speed 15000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2017, travel distance X-axis: 435 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 80 kg, total height: 2,755 mm, total length: 3,360 mm, total width: 3,870 mm, overall weight: 8,500 kg, spindle nose: MAS BBT 40, 5-axis Vertical Machining Centre CNC Control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 Hjdpfoy Ny Akex Af Uofg max workpiece dia x height 330 x 300 mm Movement X-axis 435 mm Movement Y-axis 465 mm Movement Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15.000 R/min Spindle taper MAS BBT 40 Spindle motor 7,5/5,5 kW Magazin capacity 90 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 10394, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 21 kVA, controller manufacturer: YASNAC, total height: 3,000 mm, total length: 5,000 mm, total width: 2,400 mm, table width: 380 mm, table length: 750 mm, overall weight: 5,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 8,000 rpm, mount diameter: 40 mm, input voltage: 415 V, input frequency: 50 Hz, input current: 29 A, Equipment: chip conveyor, documentation/manual, MATSUURA MC 510 VGM CNC vertical machining centre - Tool holder: SK 40 - Table with three T-slots - Includes the tool holders currently in the magazine! - The machine is equipped with a tool changer, as well as a transformer and two chip conveyors Attention: The item must be collected on a binding date to be agreed between 24/08 and 27/08/2026. FCA D-61352 Bad Homburg – loaded onto truck Hedpfx Afsy I Tkro Usfg

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 19859, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 44 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 31i, total height: 3,200 mm, total length: 7,000 mm, total width: 6,000 mm, rotary table diameter: 500 mm, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 415 V, input frequency: 50 Hz, input current: 62 A, Equipment: chip conveyor, documentation/manual, MATSUURA NX-520 Universal Machining Center - Tool holder: SK 40 - A-axis travel: -125° to +10° - C-axis travel: 360° Hjdpjy I Sq Rofx Af Ujfg - 5-axis NC rotary table: 500 mm diameter - Includes the tool holders shown in the photos! - Includes coolant system, extraction unit, and chip conveyor Note: The machine vice visible on the rotary table is not included in the scope of delivery! Note: The machine can be transported on a truck up to 2500 mm wide! Note: The item must be collected between 24.08. and 27.08.2026 on a binding, prearranged date. FCA D-61352 Bad Homburg – loaded onto truck

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 36 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 840 DI, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, overall weight: 15,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, tool weight: 10,000 g, input voltage: 415 V, input frequency: 50 Hz, input current: 50 A, Equipment: chip conveyor, MATSUURA MAN 72-25 V CNC Universal Machining Center - Tool holder: SK 40 - B-axis travel: -110°/+110° - C-axis travel: 360° - Distance between pallet surface and spindle axis: -20 to 430 mm - Distance between B-axis center and spindle axis: 4 - 410 mm - Distance between B-axis center and spindle axis: -10 mm - Distance between pallet centerline and bed zero point: 265 mm - Distance between pallet centerline and Y zero point: 180 mm - Spindle bearing inner diameter: 70 mm - Tool clamping force: 7.0 kN - B-axis feed rate: 30/min - C-axis feed rate: 50/min - Max. tool diameter: 80 mm, up to 150 mm with adjacent stations free The machine is equipped with a chip conveyor and a coolant system. Note: Includes the tool holders installed in the tool changer! Note: The machine can be transported on a truck with a width of up to 2,700 mm! Hfedpfx Ajy I Sfhsf Usg Note: The item must be collected bindingly at a date to be coordinated between 24.08. and 27.08.2026. FCA D-61352 Bad Homburg – loaded onto truck

Condition: ready for operation (used), Matsuura RA-1G RA-IG Machining Center X axis: 550mm Y-axis: 410mm Z-axis: 460mm RPM: 15000 RPM Cone: 40mm Steering: yasnac Year of construction: 1999 Transport dimensions: 250x270x235 cm (LxWxH) With pallet changer With tool changer 30 pieces with chip removal Video available on request! Location: Hamont-Achel, Belgium Matsuura RA-1G RA-IG Bearbeitungszentrum X axis: 550 mm Y-axis: 410 mm Z-axis: 460 mm Speed: 15000 U/min Cone: 40 mm Kontrollen: Yasnac Construction year: 1999 Transport dimensions: 250x270x235 cm (LxWxH) with pallet handler Mit Werkzeugwechsler 30-teilig with clamping device Video auf Anfrage erhältlich! Standort: Hamont-Achel, Belgium Matsuura RA-1G RA-IG Machining Center X axis: 550mm Y axis: 410mm Hodpfxjtt Sxds Af Ujfg Z axis: 460mm Speed: 15000 RPM Cone: 40mm Controls: yasnac Year of construction: 1999 Transport dimensions: 250x270x235 cm (LxWxH) with pallet changer With tool changer 30 pieces with chip removal Video available on request! Location: Hamont-Achel, Belgium

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Hedjy H Igrjpfx Af Ujfg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available