Universal machining center

Maho DMU 50

Condition: ready for operation (used), Year of construction: 2005, operating hours: 35,880 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: SIEMENS, controller model: 840D Powerline Shop Mill, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, tool weight: 6,000 g, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 was manufactured in 2005. It features a digital swivel rotary table with a diameter of 630 mm and a maximum table load of 200 kg. The machine offers a rapid traverse of 24 m/min and a spindle speed range of 20 - 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50 vertical machining centre we have for sale. Contact us for further details. - Table Type: Digital swivel rotary table- Table Dimensions: Diameter 630 mm x 500 mm- Max. Table Load: 200 kg- Swivel Range: 115 degrees (-5 / +110)- Table Features: Digital drives, hydraulic clamping (positioning mode only), electronic angle display, plane transformation- Spindle Speed Range: 20 - 10,000 rpm (steplessly variable)- Drive Power (100% / 40% duty cycle): 9 kW / 13 kW- Torque (40% duty cycle): 82 Nm- Measuring System: Direct linear measurement system X/Y/Z- Input Resolution X/Y/Z: 0.01 mm- Position Tolerance X/Y/Z: 0.010 mm- Rapid Traverse X/Y/Z: 24 m/min- Feed Rate: 20 m/min- Tool Changer Type: Chain magazine with double gripper- Tool Magazine Capacity: 30 tool positions SK40 (DIN 69871)- Max. Tool Diameter: D80 to D130 mm (speed-dependent)- Max. Tool Length: 290 mm- Max. Tool Weight: 6 kg- Coolant Unit Capacity: 80 l- Electrical Connection / Power Load: 17 kVA- Max. Current (Jn max): 28 A- Fuse / Supply Protection: 35 A- Voltage: 400 V / 230 V / 24 V- Frequency: 50 Hz- Footprint Dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm- Transport Dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm- Transport Weight: 4.05 t (4,050 kg) Additional Equipment: Right cabin door, Operating Mode 4, Coolant/blow-air switchover, Spray gun, Heidenhain TS641 Infrared touch probe, Electronic handwheel, Extra V24 RS232 interface in/on cabinet, MDE interface (machine on, machine running, part counter), Oil pan drawing, German documentation, 3D machine model for kinematic simulation (IGES, STEP format), Large quantity of SK40 (DIN 69871) tool holders included Hsdpfxozxqb Tj Alnot

Condition: excellent (used), Year of construction: 1999, x-travel 500 mm Hjdpszxh Tasfx Alnjt y-travel 400 mm z-travel 400 mm

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN control MillPlus iT Hjdpjwlvi Eefx Alnet table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min rapid traverse B-axis 40 U/min C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA weight of the machine ca. 6 t dimensions of machine L x W x H 3,67 x 2,25 x 2,91 m = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device

Condition: used, Year of construction: 2006, Milling machines Travel distance X: 500 mm Travel distance Y :450 mm Travel distance Z: 400 mm Number of axis: 5 milling machine / machining center Control: Heidenhain iTNC 530 table size X: 500 mm Hjdpfxezwqvho Alnet table size Y: 380 mm tool changer: 30 - time control Heidenhain Machining center - Universal Rotary table (B / C axis) Swivel milling head (B axis) HSK63 tool holder Cooling unit Rotary table: C-axis +/-360°, B-axis 108° Max. table load: approx. 500 kg Speed range - main spindle: 20 - 18,000 rpm Feed rates: 20 - 50,000 mm/min Machine weight approx.: 6.0 tons Machine dimensions approx.: 3.8 x 3.2 x 2.5 meters

Year of construction: 2005, condition: used, X-axis: 500mm, Y-axis: 450mm, Z-axis: 400mm, swivel rotary table dimensions: 630x500mm, max. table load: 200kg, swivel range: -5 to 110°, continuously variable speed: 20-10,000/min, drive power (100%/40% duty cycle): 9kW/13kW, torque (40% duty cycle): 82Nm, input resolution: 0.01mm, positioning tolerance: 0.010mm, rapid traverse: 24m/min, feed speed: 20m/min, number of SK40 tool positions (DIN 69871): 30, tool diameter (speed-dependent): D80-D130, max. tool length: 290mm, max. tool weight: 6kg, connected load: 17kW, control: Siemens 840D Powerline ShopMill, length: 4860mm, width: 4350mm, height: 2424mm, transport dimensions: 2210x2120x2150mm, weight: 4.05t, operating hours power-on time: 35,880h, spindle hours: 9609h. Equipment: digital drive and hydraulic clamping (positioning operation only), electronic angle display and plane transformation, chain magazine with double gripper, additional cabin door on the right, 80l coolant system, coolant/compressed-air switching, flushing gun, oil pan drawing, MDE interface (machine on, machine running, piece counter), documentation in German, 3D machine model for kinematic simulation in the CAM programming system (IGES, STEP format), numerous SK40 tool holders (DIN 69871), Heidenhain TS641 infrared touch probe, electronic handwheel, additional V24 RS232 interface on the control cabinet. An on-site inspection is possible. Hedpfx Aezxr Rcslnet

Condition: good (used), Year of construction: 2002, Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 rpm Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axes Travel measuring system with correction Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement A lot of aluminum has been machined! Hedjwglfxspfx Alnet

Condition: good (used), Year of construction: 2003, functionality: fully functional, X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control system: TNC Heidenhain Spindle operating hours: 13,100 Total operating hours: 38,000 Spindle speed range – main spindle: 20 – 9,000 min⁻¹ Drive power – main spindle: 9 / 13 kW Table diameter: 700 x 500 mm Tilting range B: 105° (-10°/+95°) manual Rotatable 360° manual Max. table load: 200 kg Number of T-slots: 7 Centering bore: 30H7 mm Number of tool positions: 16 Tool holder: ISO 40 DIN 69871 Max. tool length: 290 mm Max. tool weight: 6.0 kg Hjdjzi Efbepfx Alnst Max. total weight: 50 kg Feed rate max.: 10,000 mm/min Total power consumption: 17 kW Machine weight: approx. 3.2 t Space requirement: approx. 4.0 x 4.0 x 2.5 m

Condition: excellent (used), Year of construction: 2002, Contouring control : Heidenhain TNC 310 Accessories available Working range X-way 500 mm Y-way 400 mm Z-way 400 mm Main drive Speed continuously programmable 20 - 4'500 rpm. tool holder SK 40 Work table Drive B/C-axis Manual Clamping surface ø 700 x 500 mm Groove distance/size 63/14H7 mm Rotation range 360 Swivel range + 95 / - 10 Hedpfx Asp H S Uxjlnet Dimensions Length 1800 (750 control) mm depth 1800 mm Machine weight 2600 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h Hedezu Ixnspfx Alnet EQUIPMENT NC rotary table with swivel axis

Condition: good (used), Year of construction: 2006, A very fast, continuous 5-axis milling machine. Designed primarily for smaller, complex parts requiring extensive machining. This machine enables continuous 5-axis milling with high repeatability. It delivers tireless performance thanks to its linear motor and glass scale measuring system, which ensure strict tolerances. Including: High-pressure coolant up to 40 bar Programmable B-axis and C-axis Heidenhain 3D touch probe Tool measurement X axis 500 mm Y axis 450 mm Z axis 400 mm Spindle speed 18000 rpm Tool capacity 60 CNC Control Heidenhain TNC530i Tool changer/magazine SK40 Viewing in operation is possible upon appointment. Availability: 10/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Hedpjzvfn Asfx Alnjt