Used Bernardo Hbs 150 for sale (196)

Condition: new, plate thickness 1,50 mm blade length 150 x 150 mm table: 457 x 305 mm cutting angle 90 ° adjustment of stroke 20,0 mm weight 73,0 kg range L-W-H 460 x 630 x 1150 mm - Notching with a burr-free cut, without deformation of the cut edges - For punching out corners, shapes, etc. up to a maximum of 150 x 150 mm - Body made of high-quality gray cast iron for precise work - Blades made of surface-hardened tool steel Furnishing: Rbedpfx Adjxabr Eswot - manual notching machine - 2x material stops - Scales support tables - hand lever

Condition: new, cutting diameter 225 mm saw band length 2480 mm table height 910 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 160 x 160 mm capacity 60 degrees: round 100 mm capacity 60 degrees: square 100 x 100 mm turning speed range: 45/90 m/min dimensions of saw-band 2480x27x0,9 mm total power requirement 1,5 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1430x720x1700 mm Scope of delivery : - saw band - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock Rbjdpfxjxaa Tbs Adwst - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Rbodpfexabf Ejx Adwjt Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm Rbodjxabkzepfx Adwjt band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt grinding machine: Bernardo Type/Model: MS 150 x 2000 S-2 Condition: New belt dimensions: 150 x 2000 mm belt speed: 14,5 / 29 m/sec. contact wheel Ø x W: 200 / 155 mm surface grinding table: 460 x 150 mm suction connection Ø: 100 mm motor output power S1 100%: 2,1 / 2,8 kW motor input power S6 40%: 2,8 / 3,6 kW Voltage: 400 V length: 1080 mm width: 520 mm height: 1000 mm Weight approx.: 85 kg Features: - Standard with 2 speeds, optimal for grinding stainless steel. - Universally applicable for grinding of edges, surfaces and for cylindrical grinding - Graphite coating on the face grinding surface increases the sliding properties of the grinding belt - Constant belt tension due to spring-loaded tensioning device - User-friendly belt change, fast and uncomplicated - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Universally applicable for craft and industry - Large dimensioned plane grinding surface with protective cover - Including fine adjustment for parallel belt run Scope of delivery: - Sanding belt K 80 - Hinged protective disc - Grinding and support table - Workpiece stop - Dust extraction nozzle - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate blanking switch - Base frame Special offer price ex stock Mindelheim, free loading. Art. 05-1249 Rbodpsb Hhh Defx Adwet

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base Rjdpfjd Du T Ijx Adwobt • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: new, Bernardo Belt Grinding Machine MS 150 x 2000 S-2 Tape dimensions 150 x 2000 mm Belt speed 14.5 / 29 m/sec. Contact disc x W 200 / 155 mm Flat grinding table 460 x 150 mm Rbedod Rw Rhepfx Adwot Suction connection of 100 mm Engine power S1 100% 2.1 / 2.8 kW Motor recording power S6 40% 2.8 / 3.6 kW Voltage 400 V Length 1080 mm Width 520 mm Height 1000 mm Weight approx. 85 kg

Condition: new, Band saw Bernardo HBS 460 N - 400 V Technical Specification Cutting width 465 mm Cutting height 280 mm Sawband dimension 3607 x 25 x 0.6 - 3 ZpZ Rbjdsd N S Uropfx Adwet Saw widths 9.5 - 25.4 mm Cutting speed 420 / 840 m/min Table dimension 480 x 630 mm Table height 970 mm Saw table inclination -5° to 45° Suction connection of 2 x 100 mm Engine power S1 100% 2.2 kW (3.0 hp) Motor recording power S6 40% 3.0 kW (4.0 hp) Voltage 400 V Machine dimensions (W x D x H) 1050 x 800 x 1950 mm Weight approx. 162 kg Delivery • Saw band • Longitudinal stop with magnifying glass • Miter stop • Drive wheels made of aluminium • Ball-bearing saw band guide • Motor incl. brake • Sliding stick • Operating tool

Condition: new, Bernardo horizontal bandsaw HBS 275 PRO Technical specifications Cutting range round 90° 225 mm Cutting range square 90° 200 x 200 mm Cutting range flat 90° 245 x 150 mm Cutting range round 45° 160 mm Cutting area square 45° 160 x 160 mm Cutting range round 60° 100 mm Cutting range square 60° 100 x 100 mm Working height 910 mm Saw blade dimensions 2480 x 27 x 0,9 mm cutting speed 45 / 90 m/min Coolant pump 100 W Motor output power S1 100% 1.1 kW Motor input power S6 40% 1.5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 180 kg Scope of delivery - Saw blade - Workpiece stop - Undercarriage - Pressure gauge for belt tension - Saw blade guide with carbide inserts - Vise with quick lock - Coolant system - Hydraulic lowering cylinder Rodefigzzjpfx Adwebt - Motor protection switch - Automatic limit switching

Condition: new, Band saw Bernardo HBS 400 NSchnittbreite: 410 mmSchnitthöhe: 260 mmSägeband dimension: 3345 x 25 x 0,6 - 3 ZpZSägebandbreite: 9,5 - 37 mmSchnittschwindigkeit: 420 / 840 m/minTisch dimension: 450 x 560 mmTable height: 890 mmSaw table inclination: -5 to 45°Suction connection: Ø 2x 100 mmMotor output power: S1 1002 kW (3.0 PS)Motor input power: S6 400 kW (4.0 PS)Voltage: 400 VMachine dimensions: (W x D x H)875 x 740 x 1740 mmWeight approx.132 kg Rbodpfxed Tcako Adwjt

Condition: new, Bernardo belt grinder MS 150 x 2000 DC-2 / 400 V Technical specifications belt dimensions 150 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x B 200 / 150 mm surface grinding table 500 x 150 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 600 mm Height 1130 mm Weight approx. 116 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag Rbedpfx Aepag Ttedwjt - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: new, turning length 1500 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25-220/220-1500 U/min swing diameter over bed slide 350 mm Rodoxaau Espfx Adwsbt turning dia. in gap 785 mm quill travel 185 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 quill: 5 MK weight of the machine ca. 2420 kg. range L-W-H 2840 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - Initial filling with Shell Tellus 46 - Clamping disk 450 mm - 2 centering points - Frequency converter - Digital speed display - Slip clutch - Rapid traverse longitudinal and planar - Coolant system - Quick-change tool holder with 4 inserts - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: new, turning length 1500 mm turning diameter 410 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm Redpfx Adjxaaldswobt spindle bore 52,0 mm turning speeds 30 - 3000 U/min bed width 250 mm spindle taper 55029 D 1-6 taper in tailstock 4 MK quill travel 120 mm total power requirement 5,5 kW weight of the machine ca. 1400 kg. range L-W-H 2530 x 1000 x 1450 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED machine light - Change gears - Reducing sleeve - 2 centering points - Chip back wall - Operating tool * Images show identical machine

Condition: new, turning length 1500 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25 - 1600 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 180 mm spindle bore 105,0 mm engine output 7,5 kW Rsdpfx Adexaam Iewobt spindle taper DIN 55029 D 1-8 quill: 5 MK weight of the machine ca. 2.370 kg. range L-W-H 2.840 x 1.150 x 1.460 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Initial filling with Shell Tellus 46 - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Slip clutch - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: new, turning length 1500 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 250 mm spindle taper DIN 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1400 kg range L-W-H 2570 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 Rsdpjxab Umjfx Adwebt - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Shell Tellus 46 - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip back wall - Operating tools - Operating instructions

Condition: new, turning length 1500 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5.5 kW weight of the machine ca. 1845 kg. range L-W-H 2750 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears Rbsdpfoxab Nqjx Adwjt - 2 centering points - Reducing sleeve - Thread gauge - LED machine light - Chip back wall - Operating tool

Condition: new, Bernardo Universal Lathe Titan 560 x 1500 Pro Vario Technical Specifications Distance between centres: 1500 mm Centre height: 280 mm Swing over bed: 560 mm Swing over gap: 785 mm Swing over cross slide: 350 mm Bed width: 350 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1 – 8 Speed range: 25 – 220 / 220 – 1500 rpm Longitudinal feed range (42): 0.055 – 3.061 mm/rev Cross feed range (42): 0.025 – 1.384 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 75 mm Quill travel: 185 mm Quill taper: MK 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions: length 2840 mm; width x height 1150 x 1610 mm Weight approx.: 2420 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, actual speed is displayed digitally • Versatile applications in general engineering, production, single-part manufacturing, etc. • Removable gap bridge enables machining of workpieces with large diameters • Standard with rapid traverse in both longitudinal and cross directions to reduce non-productive times • Modern main spindle bearing with precision angular contact ball bearings • The machine bed is cast in one piece, extremely torsion-resistant and vibration-damping, ensuring the necessary prerequisites for precise turning • Tailstock can be offset for taper turning • Central lubrication of the carriage Rodpfx Adsxl Tcyowsbt Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Fixed steady rest – max. workpiece diameter 180 mm • Follow rest – max. workpiece diameter 120 mm • Foot pedal with brake function according to CE • Safety guard for quick-change tool post • LED machine light • Initial filling with Shell Tellus 46 • Face plate 450 mm • 2 live centres • Frequency inverter • Digital speed display • Slip clutch • Rapid traverse longitudinal and cross • Coolant system • Quick-change tool post with 4 holders • Change gears • Reducing sleeve • Chip guard rear wall • Operating tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Technical Specifications Centre distance: 1500 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 stages: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Imperial threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight: approx. 1325 kg Features • Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, selected speed displayed digitally • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly feed and thread control with leadscrew and feed shaft • Modern main spindle bearings with precision angular contact ball bearings • Standard features include frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including in the feed gearbox • Speed and feed settings are simple, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with fine scaling (0.02 mm) • Removable bridge allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Faceplate 350 mm • Fixed steady – max. workpiece diameter 135 mm • Travelling steady – max. workpiece diameter 65 mm • Foot pedal with brake function according to CE Rbjdpfx Asxl Ta Sodwjt • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • First fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 dead centres • Chip guard/rear screen • Operator tools

Condition: new, Bernardo Goliath 500 x 1500 Production Lathe Technical Specifications Centre distance: 1500 mm Centre height: 250 mm Swing diameter over bed: 500 mm Swing diameter over gap*: 720 mm Swing diameter over cross slide: 310 mm Bed width: 400 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range (24 steps): 9 – 1600 rpm Longitudinal feed range (80 steps): 0.063 – 6.43 mm/rev Cross feed range (80 steps): 0.027 – 2.73 mm/rev Metric threads (46): 1 – 224 mm Inch threads (44): 1/8 – 28 TPI Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (L x W x H): 3020 x 1240 x 1550 mm Weight approx.: 3285 kg * Removable gap bed section length: 200 mm Features • Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. • One-piece cast machine bed ensures maximum rigidity and minimal vibration, providing the essential prerequisite for precise turning • Modern precision angular contact ball bearing spindle bearings • Central, user-friendly feed and thread control, with lead and feed shafts • Rapid traverse in longitudinal and cross directions as standard to reduce idle time • Large-dimension, hardened and precision-ground gears • Removable gap bridge allows machining of large-diameter workpieces • Adjustable tailstock for taper turning, handwheel with fine graduation (0.02 mm) • Electromechanical foot brake to minimise non-productive time • Excellent cutting performance, even during facing operations Scope of delivery • Slip clutch • Rapid traverse longitudinal and cross • LED machine lamp • 3-axis digital readout ES-12V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 400 mm • Fixed steady rest – max. through diameter 200 mm • Follow rest – max. through diameter 110 mm • 1 live centre / 1 revolving centre • Motor with magnetic brake as per CE standards • Foot pedal with brake function as per CE Rbodpfxsxl D Akj Adwet • Initial fill with Shell Tellus 46 • Coolant system • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Reducing sleeve • Chip guard (rear) • Operating tools

Condition: new, Bernardo Universal Lathe Solid 460 x 1500 Pro Technical Specifications Centre distance: 1500 mm Centre height: 230 mm Swing diameter over bed: 460 mm Swing diameter over gap: 690 mm Swing diameter over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range (12 steps): 25 – 1700 rpm Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev Cross feed range (42 steps): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill travel: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2750 x 1080 x 1600 mm Weight approx.: 1845 kg Features Rbsdpfxsxl Dyve Adwet - Modern main spindle bearing with precision angular contact ball bearings - Hardened and ground gears and shafts, including feed gearbox - Central, user-friendly control for feeds and threads with leadscrew and feed rod - Oversized, hardened and precision-ground gears - Simple, smooth, and precise speed and feed adjustment - Rapid traverse longitudinal and cross as standard to reduce non-productive times - One-piece, heavily ribbed machine bed for high torsional stiffness and vibration damping, providing the basis for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. through-hole dia. 150 mm • Follow steady – max. through-hole dia. 110 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Motor with magnetic brake conforming to CE standards • Foot pedal with braking function, CE compliant • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 centre points • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard rear wall • Operating tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Technical Specifications - Distance between centers: 1500 mm - Center height: 210 mm - Swing over bed: 420 mm - Swing over gap: 580 mm - Swing over cross slide: 255 mm - Bed width: 250 mm - Spindle bore: 52 mm - Spindle mount: DIN 55029, D1–6 - Speed range (16 steps): 45 – 1,800 rpm - Longitudinal feed range (17 steps): 0.05 – 1.7 mm/rev - Cross feed range (17 steps): 0.025 – 0.85 mm/rev - Metric threads (42): 0.2 – 14 mm - Inch threads (45): 2 – 72 TPI - Tailstock quill diameter: 50 mm - Tailstock quill travel: 140 mm - Tailstock taper: MT 4 - Motor power: 3.0 / 4.5 kW - Machine dimensions (L x W x H): 2570 x 900 x 1600 mm - Weight approx.: 1,400 kg Product Features • Prism bed made of grey cast iron, induction hardened and precision ground • Electromechanical foot brake for reduced auxiliary times • Central, user-friendly control for feeds and threading with lead and feed screw • Modern main spindle bearing with precision angular contact ball bearings • Large-dimensioned, hardened and precision-ground gears • Hardened and ground gears and shafts, including feed gearbox • Simple, smooth, and precise adjustment of speed and feeds • Adjustable tailstock for taper turning, handwheel with fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity 135 mm • Traveling steady rest – max. capacity 65 mm • Coolant device • Four-way tool post • Safety guard for tool post • Micrometer longitudinal stop • Slip clutch • Turret stop with fine adjustment • Thread indicator dial • Motor with electromagnetic brake, CE-compliant • Foot pedal with brake function, CE-compliant • Initial fill with Shell Tellus 46 • LED machine lamp • Change gears Rodpfxjxl Dwue Adwobt • Reducing sleeve • 2 dead centers • Chip guard • Service tools

Condition: new, Bernardo universal lathe Solid 460 x 1500 Pro Vario Technical specifications center width: 1500 mm center height: 230 mm Swing diameter over bed: 460 mm Swing diameter over cranking: 690 mm Swing diameter over cross slide: 274 mm bed width: 300 mm spindle bore: 80 mm spindle mounting: DIN 55029, D1 - 8 Speed range, 2 steps: 25 - 250 / 250 - 1700 rpm range of longitudinal feeds: (42) 0,031 - 1,7 mm/rev Range face feeds: (42) 0.014 - 0.784 mm/rev Metric threads: (41) 0.1 - 14 mm inch threads: (60) 2 - 112 Gg/1" Quill diameter: 60 mm quill travel: 130 mm Rbodpfx Aonfu Amjdwst quill mount: MK 4 Motor power: 5,5 kW (7,5 PS) Machine dimensions: (W x D x H) 2750 x 1080 x 1370 mm weight approx. 2050 kg Scope of delivery 3-axis digital display ES-12 V with LCD display 3-jaw chuck PS3-250 mm / D8 Fixed steady rest - passage diam. max. 150 mm Moving steady rest - passage diam. max. 110 mm Initial filling with Shell Tellus 46 Clamping disc 450 mm Quick-change toolholder with 4 inserts Safety device for quick-change toolholder Foot pedal with brake function according to CE Coolant device Frequency converter Slipping clutch Change gears Reducing sleeve 2 centering points Threaded clock LED machine light Chip rear wall Operating tool Rapid traverse longitudinal and plane

Condition: new, Universally applicable bending machine for metalworking and repair shops. Working length: 1270 mm Max. sheet thickness (400 N / mm²): 2.0 mm Max. opening width: 45 mm Bending angle: 0 - 135° Width: 1620 mm Depth*: 1115 mm Height: 1150 mm Weight approx.: 340 kg * with back stop Features: - Universally applicable bending machine for metalworking and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using the foot pedal, hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Fast and easy bending process using the bow handle - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles Rbjdpfx Adovnrk Ejwjt Scope of delivery: - Segmented Upper beam - Back stop - Bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 270 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total width: 850 mm, total length: 1,850 mm, total height: 1,250 mm, overall weight: 660 kg, working height: 650 mm, power: 1.6 kW (2.18 HP), For sale is a used, fully functional, fully automatic bandsaw with roller feed, featuring the following technical specifications: - Round cutting area at 90°: 320 mm - Flat cutting area at 90°: 320 x 300 mm - Square cutting area at 90°: 300 x 300 mm - Working height: 650 mm - Infinitely variable cutting speed: 20 - 100 m/min - Saw band dimensions: 3660 x 27 x 0.9 mm - Coolant pump: 120 W - Motor power: 1.5 kW - Machine dimensions (L x W x H): 1850 x 850 x 1250 mm - Weight: approx. 660 kg Operation note: Enter the material length or specify the quantity. Then press Start. The job will be executed automatically with the specified number of pieces. Rbjdpfx Asyfta Hjdwjt A viewing appointment for the machine can be arranged in advance and demonstrated under power. The price stated here is net.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, HBM 75 x 2000 Belt Grinder Demonstration unit, as-new condition with minor signs of use Year of manufacture: 2012 Redpfxjydn Tfs Adwjbt Description: - Universally applicable for grinding edges, surfaces, and for cylindrical grinding - Graphite coating on the flat grinding area increases the gliding properties of the sanding belt - Consistent belt tension thanks to spring-loaded tensioning device - User-friendly belt change, fast and straightforward - High grinding performance due to high belt speed - Quick adjustment for horizontal and angled position - Suitable for both workshop and industrial applications - Large flat grinding surface with protective cover - Includes fine adjustment for parallel belt tracking Scope of delivery: - K80 sanding belt - Sanding and support table - Rubberized contact wheel - Eye protection - Dust extraction nozzle - Graphite coating - Motor protection switch - Base frame