Used Bernardo Msb 550 V for sale (196)

Condition: new, x-travel 1000 mm Hjdpfx Afoxaak Tezeh y-travel 360 mm z-travel 400 mm spindle taper ISO 40 ISO table: 1370 x 300 mm feed: 30-830 / 23-625 mm/min. turning speeds 45 - 1660 U/min distance spindle /table 60 - 460 mm rapid traverse Z Achse 750 mm/min throat 95 - 575 mm total power requirement 3.0 kW weight of the machine ca. 1505 kg range L-W-H 1740 x 1860 x 1900 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system "Huron", adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gears running in an oil bath - Upper arm with clearly structured gear box for the spindle speed - Digital position display for x, y and z axes included in delivery - Precisely surface-machined cross table with T-slots Scope of delivery - 3-axis digital display ES-12 H with LCD display - Drawbar spindle M16 - LED machine light - Feed for x, y and z axes - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combined milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable protective device - Central lubrication for x, y and z axes - Operating tool

Condition: new, roll diameter 520 mm throat 520 mm workpiece height 310 mm cutting speed 25 - 500 m/min table surface area 600 x 500 mm band length 3.880 x 3-16 mm mm Table tiltable up to 15° Grad work height max. 1000 mm total power requirement 1,5 kW weight of the machine ca. 500 kg. dimensions of the machine ca. 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device - halogen light Hodexaazxjpfx Afzeh - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Condition: new, bore capacity in steel (diameter) 28,0 mm throat 320 mm bore stroke 150 mm morse taper 3 MK table: 500 x 350 mm turning speeds 75 - 3010 U/min total power requirement 1,35 / 1,7 kW weight 290 kg range L-W-H 600 x 700 x 1900 mm Description: - Standard with automatic quill feed (0.04 - 0.3 mm / rev) - Helical gear for optimal power transmission - High efficiency and smooth running thanks to helical gears - in combination steel against reinforced fiber material - Automatic quill feed Hsdpfx Asxaba Ajfzsh - is deactivated when the set drilling depth is reached - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Stable and polished steel column, designed for heavy use - Quality ball bearings ensure high concentricity - 8 switchable speeds through powerful 2-stage drive motor - Adjustable drilling depth stop with mm scale Scope of delivery: - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Condition: used, Year of construction: 2015, Technical details: turning diameter over bed: 420 mm turning diameter over support: 255 mm turning length: 1000 mm turning dia. in gap: 580 mm centre height: 205 mm spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 550 / 550 - 3000 (FU gesteuert) / 2 step U/min feed:: längs: 0,05 - 1,7 mm/U feed:: plan: 0,025 - 0,85 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,5 t Hsdpfx Afsvaxi Eozeh dimension machine xH: 2,1 x 1,1 x 1,5 m Thread cutting possible, e.g. metric thread and inch thread Infinitely variable speed control 3-axis position indicator 3-jaw chuck Ø 200mm Multifix size B quick-change tool holder *

Condition: excellent (used), Year of construction: 2010, Bernardo VMS 360 vertical band saw. Top condition as a training machine - hardly used The vertical band saws in the VMS series are suitable for sawing almost all sawable materials (e.g. steel, plastic, non-ferrous materials, colored materials, etc.). They are mainly used in general production, in tool and fixture construction for the manufacture of punching and cutting tools. Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Cutting speed 20 - 90 m/min Saw band length: 2840 mm Saw band width: 3 - 16 mm Table size: 500 x 400 mm Motor power: 0.75 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H) 940 x 560 x 1850 mm Weight approx. 250 kg Comes standard with band welding device, annealing device, scissors and grinding stone Comes standard with continuously adjustable cutting speed Machine body made of robust steel construction for smooth running Precision blade guide for optimal cutting results Ideal for sawing complicated contours and shapes Blow-out device with compressor included in delivery For radius sawing, saw bands from 3 mm width available Solid cast iron table, the large support surface ensures safe working Location: from stock 54634 Bitburg Hedpsvutxdjfx Afzoh - available at short notice -

Condition: new, Bernardo Universal Milling Machine UWF 110 Servo -1000 Technical specifications table size 1370 x 300 mm Spindle mounting ISO 40 mm spindle speed (11) 45 - 1660 rpm Travel lengthwise (x) 1000 mm traverse path cross (y) 360 mm Travel vertical (z) 400 mm Distance spindle / table 60 - 460 mm throat 95 - 575 mm Table can be tilted -45° to + 45 Max. workpiece weight workpiece weight 250 kg Feed range longitudinal / transverse (8) 30 - 830 mm/min Feed range vertical (8) 23 - 625 mm/min Rapid traverse x-, y- and z-axis 1000 / 1000 / 750 mm/min T-slots (number / width / distance) 3 / 14 mm / 80 mm Main motor 3,0 kW Servo motor (torque / power) 10 Nm / 1.5 kW Coolant pump power 60 W Coolant pump flow rate 12 l/min Machine dimensions (W x D x H) 1740 x 1860 x 1900 mm Weight approx. 1505 kg Scope of delivery - 3-axis digital display ES-12 H with LCD display - M16 tightening spindle - LED machine light - feed for x-, y- and z-axis - coolant device Hedpfjg Hzbxex Afzeh - counter bearing - Long milling arbor ISO 40 / 27 mm - Combination arbor ISO 40 / 27 mm - Coolant trough - Adjustable guard - Central lubrication for x-, y- and z-axis - Operating tool

Condition: new, Bernardo Gear-Driven Pillar Drilling Machine GB 32 S Vario Technical Specifications • Drilling capacity max.: 32 mm • Tapping capacity max.: M22 • Drill chuck: 1 – 13 mm / B16 • Morse taper: MK 4 • Spindle speed / 2 ranges: 90 – 980 / 1000 – 3000 rpm • Feed range: 0.06 / 0.12 / 0.18 mm/rev • Throat depth: 300 mm • Max. spindle to table distance: 670 mm • Spindle to base plate distance: 1285 mm Hedpfxex Agiuo Afzoh • Quill stroke: 160 mm • Column diameter: 125 mm • Table size / T-slot size: 460 x 460 mm / 14 mm • Base working area: 420 x 340 mm • Motor output (S1 100%): 1.5 kW / 400 V • Motor input (S6 40%): 2.2 kW / 400 V • Machine dimensions (W x D x H): 540 x 900 x 2120 mm • Weight: approx. 360 kg Features • Infinitely variable speed control, ideal for adjusting the desired cutting speed • Machined base (420 x 340 mm) with integrated coolant pump • Integrated digital display for speed and drilling depth • Heavy-duty cast iron table with rotatable and tiltable work surface • Supplied as standard with 3 automatic spindle feeds • Guaranteed concentricity ≤ 0.02 mm measured in the quill • User-friendly membrane keypad operation • Standard with automatic quill feed and tapping device • Robust, ground steel column designed for heavy-duty use Scope of Delivery • Gear-driven drill chuck 1 – 13 mm / B16 • Drill chuck arbor MK 4 / B16 • Reducing sleeves MK 4 / 3, MK 3 / 2 • Delta VFD frequency converter • Automatic tool ejector • Coolant system • Electromagnetic spindle feed • Tapping device • LED machine lamp • Digital speed display • Digital drilling depth display • Height-adjustable safety guard

Condition: new, Bernardo Gluing Press HVS 3000 The HVS 3000 gluing rack stands out for its universal application, as well as its easy and quick operation, making it indispensable for daily use in workshops and carpentries. Technical Specifications Working length: 2800 mm Working height: 1460 mm Cylinder stroke: 65 mm Pressing force: 2500 kg Vertical hole pitch: 50 mm Hedpjxrnu Dofx Afzsh Total length: 3000 mm Total height: 2070 mm Frame depth: 925 mm Weight: approx. 198 kg Features • Suitable for a wide range of applications such as solid wood gluing, door manufacturing, edge banding, etc. • Robust gluing press with solid steel construction • Faster and more efficient bonding compared to screw clamps • Supplied as standard with 4 adjustable pressure beams and 1 pressure bracket • No tilting of pressure cylinders due to double spring-mounted guide Scope of delivery • 4 movable pressure beams, each with a vertical hand hydraulic cylinder and counter support • 1 movable, adjustable pressure bracket

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Technical specifications: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm / rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Hjdpfx Afsv N Uyrozoh Milling head tilting: -60° to +60° Distance spindle to table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor - Input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Keyless drill chuck 3 - 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 - Reducing sleeve MT 4 / 3 - Combined milling arbor MT 4 / 27 mm - Height-adjustable protective cover - Automatic spindle sleeve feed - Lifting motor for milling head - LED machine light - Digital spindle sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tools Without base frame

Condition: new, Bernardo Universal Lathe Titan 560 x 3000 Pro Vario Technical Specifications Centre distance: 3000 mm Centre height: 280 mm Swing over bed: 560 mm Swing over gap: 785 mm Swing over cross slide: 350 mm Bed width: 350 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1 – 8 Speed range: 25 – 220 / 220 – 1500 rpm Longitudinal feed range (42): 0.055 – 3.061 mm/rev Cross feed range (42): 0.025 – 1.384 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 75 mm Quill stroke: 185 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (L): 4340 mm Width x Height: 1150 x 1610 mm Weight: approx. 3000 kg Features • Standard with Delta frequency inverter for high torque at low speed and nearly constant speed under load • Stepless speed control, with digital speed readout • Versatile applications in general engineering, production, single-part manufacture, etc. • Removable gap bridge allows machining of large-diameter workpieces • Rapid traverse longitudinally and in cross direction as standard, reducing non-productive time • Modern main spindle bearing with precision angular contact ball bearings • The machine bed is made from a single casting, extremely torsion-resistant and low-vibration, providing the foundation for precise turning • Tailstock is adjustable for taper turning • Central lubrication system for carriage Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Fixed steady rest – max. workpiece diameter 180 mm • Travelling steady rest – max. workpiece diameter 120 mm • Foot pedal with CE-compliant brake function • Safety guard for quick-change tool post • LED machine lamp • Initial fill with Shell Tellus 46 • Faceplate 450 mm Hedpfsxl Tdqjx Afzeh • 2 centre points • Frequency inverter • Digital speed readout • Safety slip clutch • Rapid traverse longitudinally and in cross direction • Coolant system • Quick-change tool post with 4 holders • Change gears • Reducing sleeve • Chip guard tool kit

Condition: new, Bernardo Universal Lathe Titan 560 x 2000 Pro Vario Technical Specifications Center Distance: 2000 mm Center Height: 280 mm Swing Over Bed: 560 mm Swing Over Gap: 785 mm Swing Over Cross Slide: 350 mm Bed Width: 350 mm Spindle Bore: 105 mm Spindle Mount: DIN 55029, D1 – 8 Speed Range: 25 – 220 / 220 – 1500 rpm Longitudinal Feed Range (42): 0.055 – 3.061 mm/rev Cross Feed Range (42): 0.025 – 1.384 mm/rev Metric Threads (41): 0.1 – 14 mm Inch Threads (60): 2 – 112 TPI Quill Diameter: 75 mm Quill Travel: 185 mm Quill Taper: MK 5 Motor Power: 7.5 kW (10.0 HP) Machine Dimensions Length: 3340 mm Width x Height: 1150 x 1610 mm Weight approx.: 2720 kg Features • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, with digital readout of set speed • Versatile applications in general engineering, production, one-off manufacturing, etc. • Removable gap bridge for machining large-diameter workpieces • Standard rapid traverse in longitudinal and cross directions for reduced non-productive times • Modern main spindle bearing with angular contact ball bearings in precision design • The machine bed is cast in one piece, extremely torsion-resistant and low-vibration, ensuring a key requirement for precise turning • Tailstock offset for taper turning • Central lubrication for the carriage Scope of Delivery • 3-axis ES-12 V digital readout with LCD display • 315 mm / D8 3-jaw chuck PS3 • Fixed steady rest – max. passage diameter: 180 mm • Follow steady rest – max. passage diameter: 120 mm • Foot pedal with braking function (CE compliant) • Safety guard for quick-change toolpost • LED machine light • Initial fill with Shell Tellus 46 • 450 mm face plate • 2 live centers • Frequency inverter • Digital speed display • Slip clutch • Rapid traverse longitudinal and cross • Coolant device • Quick-change toolpost with 4 holders • Change gears • Reducing sleeve Hsdpfxoxl Tc Ts Afzsh • Chip guard • Operating tools

Condition: new, Bernardo Universal Lathe Titan 560 x 1500 Pro Vario Technical Specifications Distance between centres: 1500 mm Centre height: 280 mm Swing over bed: 560 mm Swing over gap: 785 mm Swing over cross slide: 350 mm Bed width: 350 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1 – 8 Speed range: 25 – 220 / 220 – 1500 rpm Longitudinal feed range (42): 0.055 – 3.061 mm/rev Cross feed range (42): 0.025 – 1.384 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 75 mm Quill travel: 185 mm Quill taper: MK 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions: length 2840 mm; width x height 1150 x 1610 mm Weight approx.: 2420 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, actual speed is displayed digitally • Versatile applications in general engineering, production, single-part manufacturing, etc. • Removable gap bridge enables machining of workpieces with large diameters • Standard with rapid traverse in both longitudinal and cross directions to reduce non-productive times • Modern main spindle bearing with precision angular contact ball bearings • The machine bed is cast in one piece, extremely torsion-resistant and vibration-damping, ensuring the necessary prerequisites for precise turning • Tailstock can be offset for taper turning • Central lubrication of the carriage Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Fixed steady rest – max. workpiece diameter 180 mm • Follow rest – max. workpiece diameter 120 mm • Foot pedal with brake function according to CE • Safety guard for quick-change tool post • LED machine light • Initial filling with Shell Tellus 46 • Face plate 450 mm • 2 live centres • Frequency inverter • Digital speed display • Slip clutch • Rapid traverse longitudinal and cross • Coolant system • Quick-change tool post with 4 holders • Change gears Hedpfx Aoxl Tcysfzoh • Reducing sleeve • Chip guard rear wall • Operating tools

Condition: new, Bernardo Universal Lathe Solid 460 x 2000 Pro Vario Technical Specifications Centre distance: 2000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill stroke: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1370 mm Weight approx.: 2030 kg Hodexl Tcmspfx Afzjh Features • Modern main spindle bearing with precision angular contact ball bearings • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, set speed displayed on digital readout • Hardened and ground gears and shafts, including in feed gearbox • Standard with rapid traverse longitudinally and in cross for reduced non-productive times • Central, user-friendly feed and thread selection with leadscrew and feed rod • Oversized, hardened, and precision-ground gears • Simple, smooth, and precise speed and feed adjustment • One-piece cast machine bed, extremely torsion-resistant and low-vibration, ensuring essential prerequisites for precision turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Foot pedal with CE-compliant brake function • Coolant system • Frequency inverter • Overload clutch • Rapid traverse longitudinal and cross • Change gears • Reducing sleeve • 2 centres • Thread dial indicator • LED machine lamp • Chip guard at the rear • Operating tools

Condition: new, Bernardo Universal Lathe Solid 460 x 1000 Pro Vario Technical Specifications - Distance between centres: 1000 mm - Centre height: 230 mm - Swing over bed: 460 mm - Swing over gap: 690 mm - Swing over cross slide: 270 mm - Bed width: 300 mm - Spindle bore: 80 mm - Spindle mount: DIN 55029, D1-8 - Spindle speed range: 25 – 250 / 250 – 1700 rpm - Longitudinal feed range (42 rates): 0.055 – 3.065 mm/rev - Cross feed range (42 rates): 0.025 – 1.386 mm/rev - Metric thread pitches (41): 0.1 – 14 mm - Inch thread pitches (60): 2 – 112 TPI - Quill diameter: 60 mm - Quill travel: 130 mm - Quill taper: MK 4 - Motor power: 5.5 kW (7.5 HP) - Machine dimensions (W x D x H): 2300 x 1080 x 1600 mm - Weight: approx. 1730 kg Features • Modern headstock spindle bearing with precision angular contact ball bearings • Standard-equipped with Delta frequency inverter for high torque at low speeds and near-constant speed under load • Infinitely variable speed control; set speed is shown on the digital display • Hardened and ground gears and shafts, including in the feed gearbox Hjdpfjxl Tcasx Afzeh • Standard longitudinal and cross rapid traverse for minimized idle times • Central, user-friendly controls for feeds and threading, with leadscrew and feed rod • Large-size gears, hardened and precision-ground • Simple, smooth and precise speed/feed adjustments • Machine bed is one-piece cast, extremely rigid and low-vibration for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. diameter 150 mm • Travelling steady rest – max. diameter 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change toolpost with 4 tool holders • Safety guard for quick-change toolpost • Foot pedal with CE-compliant braking function • Coolant system • Frequency inverter • Slip clutch • Longitudinal and cross rapid traverse • Change gears • Reducing sleeve • 2 dead centres • Thread dial indicator • LED machine lamp • Chip guard • Operating tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Technical Specifications Centre distance: 1500 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 stages: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Imperial threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight: approx. 1325 kg Features • Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, selected speed displayed digitally • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly feed and thread control with leadscrew and feed shaft • Modern main spindle bearings with precision angular contact ball bearings • Standard features include frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including in the feed gearbox • Speed and feed settings are simple, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with fine scaling (0.02 mm) • Removable bridge allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Faceplate 350 mm • Fixed steady – max. workpiece diameter 135 mm • Travelling steady – max. workpiece diameter 65 mm • Foot pedal with brake function according to CE • Four-way tool post • Safety guard for four-way tool post Hodpoxl Ta Sefx Afzsh • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • First fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 dead centres • Chip guard/rear screen • Operator tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 steps: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2090 x 1050 x 1600 mm Weight approx. 1145 kg Features • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, with set spindle speed displayed digitally • Prism bed made of grey cast iron, induction-hardened and precision ground • Central, user-friendly controls for feeds and threading with leadscrew and feed shaft • Modern main spindle bearing arrangement with precision angular contact ball bearings • Standard with frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including those in the feed gearbox • Simple, smooth, and precise adjustment of speed and feed settings • Sliding tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout system ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity dia. 135 mm • Travelling steady rest – max. capacity dia. 65 mm • Foot pedal with brake function, CE compliant Hodpfx Afoxl Tarozsh • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Indexing stop with fine adjustment • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard (rear) • Operating tools

Condition: new, Bernardo universal lathe Solid 460 x 1500 Pro Vario Technical specifications center width: 1500 mm center height: 230 mm Swing diameter over bed: 460 mm Swing diameter over cranking: 690 mm Swing diameter over cross slide: 274 mm bed width: 300 mm spindle bore: 80 mm spindle mounting: DIN 55029, D1 - 8 Speed range, 2 steps: 25 - 250 / 250 - 1700 rpm Hodpsnfu Amsfx Afzoh range of longitudinal feeds: (42) 0,031 - 1,7 mm/rev Range face feeds: (42) 0.014 - 0.784 mm/rev Metric threads: (41) 0.1 - 14 mm inch threads: (60) 2 - 112 Gg/1" Quill diameter: 60 mm quill travel: 130 mm quill mount: MK 4 Motor power: 5,5 kW (7,5 PS) Machine dimensions: (W x D x H) 2750 x 1080 x 1370 mm weight approx. 2050 kg Scope of delivery 3-axis digital display ES-12 V with LCD display 3-jaw chuck PS3-250 mm / D8 Fixed steady rest - passage diam. max. 150 mm Moving steady rest - passage diam. max. 110 mm Initial filling with Shell Tellus 46 Clamping disc 450 mm Quick-change toolholder with 4 inserts Safety device for quick-change toolholder Foot pedal with brake function according to CE Coolant device Frequency converter Slipping clutch Change gears Reducing sleeve 2 centering points Threaded clock LED machine light Chip rear wall Operating tool Rapid traverse longitudinal and plane

Condition: new, Edge sanding machine Bernardo HV 80 OSZI work table: 850 x 300 mmTable height adjustment: 90 mmBelt length: 2510 mmBelt width: 150 mmSanding belt rear wall: 950 x 200 mmSanding unit lockable: 90° / 0°Belt speed: 16 m/sec.Additional table: 300 x 250 mmSuction connection: Ø100 mmRoller diameter: 110 mmMotor output power: S1 1005 kW (2.0 PS)Motor input power: S6 401 kW (2.8 PS)Voltage: 400 VMachine dimensions (W x D x H)1400 x 680 x 1220 mmWeight approx. 148 kg Hsdsd Tb U Sopfx Afzoh

Condition: new, Column drilling machine Bernardo GB 35 HSV with coolant system Drilling capacity of 32 mm Drill Chuck 1-16 mm / B-16 Dome MK 4 Spindle speed (12) 75-3200 RPM Feed range 0.10 0.18 0.26 mm / U Throat depth 295 mm Hsdpsd Hbwiofx Afzjh Distance from spindle / table max 775 mm Distance from spindle / base plate 1185 mm Quill stroke 125 mm Column diameter 115 mm Table size 500 x 455 mm T - slot size 14 mm Work surface of bottom panel 375 x 365 mm S1 motor power output 100% 1.1 / 1.5 kW (400 V) Motor power S6 40% 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H) 630 x 700 x 2050 mm Weight approx. 340 kg Scope of delivery Keyless drill Chuck 1-16 mm / B-16 Chuck Dorn MK 4 / B-16 Coolant system Reduction sleeve MK 4 / 3 Height-adjustable guard Digital drill depth indicator Thread cutting device LED machine luminaires Control tool

Condition: new, Bernardo column drilling machine GHD 28 SV Technical specifications Drilling capacity of Max 28 mm Thread cutting max. M12 Keyless drill Chuck 1-16 mm / B-16 Dome MK 3 Spindle speed (8) 75-3010 RPM Throat depth 320 mm Distance from spindle / table max 810 mm Distance from spindle / base plate 1230 mm Hsdpfsd Err Uex Afzsh Quill stroke 150 mm Column diameter 105 mm Work surface of bottom plate 325 x 360 mm Table size / T - slot size 500 x 350 mm / 14 mm S1 motor power output 100% 0,90 / 1,2 kW (400 V) Motor power S6 40% 1.35 / 1.7 kW (400 V) Machine dimensions (W x D x H) 600 x 700 x 1900 mm Weight approx. 290 kg Scope of delivery • Keyless drill Chuck 1-16 mm / B-16 • Drill Chuck Arbor MK 3 / B-16 • Reducing sleeve MT 3 / 2, MK 3 / 1 • Automatic tool ejector • Right link running Setup • Height-adjustable guard

Condition: new, Bernardo BF 45 HSV Drilling and milling machine Technical specifications Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm cutter head max. 80 mm throat 280 mm Spindle speed (12) 75 - 3200 rpm Spindle mounting MK 4 quill stroke 120 mm spindle sleeve feed (3) 0,10 / 0,18 / 0,26 mm/rev table size 730 x 210 mm Hjdpegd H Uxefx Afzsh T-slot size 14 mm Distance spindle / table max. 640 mm distance spindle / base plate max. 1190 mm Travel (x / y) 495 / 200 mm milling head swivelling -90° to +90° Height adjustment of milling head 260 mm column diameter 115 mm Working surface base plate 365 x 375 mm Motor output power S1 100% 1.1 / 1.5 kW (400 V) Motor input power S6 40% 1.5 / 2.2 kW (400 V) Machine dimensions (W x D X H) 1070 x 800 x 2060 mm Weight approx. 362 kg Scope of delivery - Quick-action drill chuck 3 - 16 mm / B 16 - Drill chuck mandrel MK 4 / B 16 - Tightening spindle M 16 - Reducing bushing MK 4 / 3 - Combination arbor MK 4 / 27 mm - Automatic quill feed - Height-adjustable protective cover - Digital quill stroke display - Thread cutting device - Coolant device - LED machine light - Longitudinal measuring scale - Operating tool

Condition: new, Bernardo Gear Drilling Machine GB 30 Vario Technical specifications Drilling capacity in steel 32 mm Drilling capacity in cast iron 35 mm Thread cutting max. M22 drill chuck 1 - 13 mm / B 16 Morse taper MK 3 Spindle speed / 2 steps 70 - 495 / 495 - 3500 rpm feed range 0,1 / 0,2 / 0,3 mm/rev throat 280 mm distance spindle / table max. 650 mm distance spindle / base plate 1120 mm spindle sleeve stroke 125 mm column diameter 110 mm table size / T-slot size 450 x 380 mm / 14 mm Working surface base plate 340 x 330 mm Motor output power S1 100% 1.1 kW Motor input power S6 40% 1,5 kW Machine dimensions (W x D x H) 500 x 800 x 2100 mm Weight approx. 320 kg Scope of delivery - Drill chuck mandrel MK 3 / B 16 - Reducing sleeve MK 3 / 2, MK 3 / 1 - Gear rim drill chuck 1 - 13 mm / B 16 - Coolant device - Electromagnetic spindle feed - Tapping device Hedpjgd H Uusfx Afzjh - Automatic tool ejector - LED machine light - Digital speed display - Initial filling with Shell Tellus 46 - Height adjustable protective cover

Condition: new, Bernardo GB 55 NC Vario geared pillar drilling machine Technical specifications Drilling capacity in steel 50 mm Drilling capacity in cast iron 60 mm Thread cutting max.M42 Drill chuck 1 - 13 mm / B 16 Morse taper MK 4 Spindle speed / 2 steps 50 - 316 / 316 - 2200 rpm Feed range 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev Projection 360 mm Distance spindle / table max. 580 mm Distance spindle / base plate 1185 mm Hsdpfx Aerivbvjfzsh Quill stroke 225 mm180 mm Column diameter Table size / T-slot size 570 x 480 mm / 14 mm Working surface base plate 435 x 445 mm Motor power 3.0 kW Machine dimensions (W x D x H) 750 x 1020 x 2340 mm Weight approx. 630 kg Scope of delivery Sprocket chuck 1 - 13 mm / B 16 Drill chuck arbor MK 4 / B 16 Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 Motorized table stroke Coolant device Touch screen Automatic tool ejector Electromagnetic spindle feed Thread cutting device Initial filling with Shell Tellus 46 LED machine light Digital speed display Digital drilling depth display Height-adjustable protective cover

Condition: new, Bernardo geared drill GB 35 Vario Technical specifications Drilling capacity in steel 35 mm Drilling capacity in cast 40 mm Thread cutting max. M24 Drill Chuck 1-13 mm / B-16 Dome MK 4 Spindle speed / 2 levels 65-460 / 460 - 3250 RPM Feed range 0.1 / 0.2 / 0.3 mm / Rev Throat depth 320 mm Distance from spindle / table max 580 mm Distance from spindle / base plate 1145 mm Quill stroke 160 mm Column diameter 120 mm Table size / T - slot size 500 x 420 mm / 14 mm Desktop Base 365 x 370 mm S1 motor power output 100% 1,5 kW Motor power S6 40% 2,2 kW Machine dimensions (W x D x H) 600 x 870 x 2170 mm Weight 375 kg Scope of delivery • Keyed Chuck 1-13 mm / B-16 • Drill Chuck Arbor MK 4 / B-16 • Reducing bushing MK 4 / 3, MK 4 / 2 • Coolant system Hodpfod Du Tyox Afzjh • Thread cutting device • Electromagnetic spindle feed • Automatic tool ejector • LED machine luminaires • Initial filling with Shell Tellus 46 • Digital speed display • Height-adjustable guard

Condition: new, Bernardo drilling and milling machine FM 50 HSV incl. 3-axis digital display drilling capacity in steel 32 mm drilling capacity in cast iron 40 mm cutter head milling cutter max. 80 mm throat 220 mm spindle speed (12) 75 - 3200 rpm spindle mounting MK 4 quill stroke 120 mm spindle sleeve feed (3) 0.10 / 0.18 / 0.26 mm/rev. table size 800 x 240 mm travel (x / y) 555 / 225 mm milling head tiltable -60° to +60° distance spindle / table 95 - 485 mm height adjustment milling head 390 mm T-slot size 14 mm Lift motor 90 W Motor output power S1 100% 1.1 / 1.5 kW (400 V) Motor input power S6 40% 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)* 1140 x 970 x 1460 mm Weight approx. 322 kg Scope of delivery - 3-axis digital display i200 with LCD display - Quick-action drill chuck 3 - 16 mm / B 16 - Drill chuck mandrel MK 4 / B 16 - tightening spindle M 16 Hsdpjd Du Tfsfx Afzjh - Reducing sleeve MK 4 / 3 - Combination arbor MK 4 / 27 mm - Height adjustable protective cover - Automatic quill feed - Lift motor for milling head - LED machine light - Digital quill stroke display - Thread cutting device - Blade protection cover - Longitudinal measuring scale - Operating tool