Used Optimum Opti S210 G for sale (107)

Condition: new, bore capacity in steel (diameter) 40 mm throat 350 mm bore stroke 170 mm morse taper 4 MK table: 530 x 530 mm turning speeds 90 - 1520 U/min feed 0,1 - 0,2 mm/U thread M30 ST60 column diameter 150 mm engine output 2,2 kW dimensions 880 x 595 x 2445 mm weight 530 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop Bwsbuouia Hfo S U U Dsl - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: used, machine/vehicle number: G-ME125419aP, Metal band saw Optimum S130GH, 0.25 kW, 78 kg Bjbsvw Edkju S U U Djwl Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 460 mm turning diameter over support: 388 mm turning length: 1016 mm centre distance: 1016 mm center height measured in bed: 230 mm turning dia. in gap: 640 mm spindle bore of work spindle: 52 mm Bjbuju Ixzbs S U U Dswl range of revolution per miute: 30 - 2000 / 12 step U/min feeds:: längs: 0,032 - 0,898 mm/U feeds:: plan: 0,016 - 0,449 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 3,75 kW weight of the machine ca.: 1,6 t dimension machine xH: 2,1 x 1,1 x 1,5 m Switchable gearbox Quantum 3-way length measuring system Top slide adjustment +/-90° Multifix quick-change steel holder 3-jaw chuck Ø 200mm rotating center in tailstock Threads: Inch thread; Metric thread; Trapezoidal thread; Module thread Accessories: Change gears, machine feet, 1x fixed quill tip *

Condition: ready for operation (used), Optimum milling machine Bjbujv H Nnxe S U U Dewl

Condition: used, bore capacity in steel (diameter) 28 mm Bobu Sofbh Ake U U Dowl throat 200 mm bore stroke 105 mm spindle taper MK 3 number of spindle speeds 12 spindle speed: 35 - 5600 Upm column diameter 92 mm table-size 340 x 360 mm table rotating 360 ° total power requirement 1,5 kW weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm

Condition: good (used), Year of construction: 2020, Bench drill, pillar drill, column drill, column drill -Manufacturer: Optimum, bench drill type DX 13V with coolant system -Clamping table: 290 x 300 mm -Spindle mount: Drill chuck B16 Bjbu S Uewd Tnco U Dswl -Projection: 230 mm -Speed: 114 - 3000 rpm continuously variable -Column: diameter 60 mm -Spindle stroke: 90 mm -Motor: 0.85 kW -Voltage: 240 V -Dimensions: 570/620/H1880 mm -Weight: 97 kg

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron Bebu Seuy S Sdo U U Dowl - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: good (used), Year of construction: 2008, Machine type: Pillar drill Manufacturer: OPTIMUM Model: B 30 BS Vario Year of manufacture: 2008 Condition: good Type of offer: used machine Technical data: Drilling diameter: 30 mm Drilling depth: 125 mm Speed range: 50 - 4000 rpm Spindle mount: MK4 Thrust: 285 mm Bwsbu S Uevgfile U Djl Drive: 2.2 kW 230 volts Remark: Electrically adjustable speed adjustment, Thread cutting device, Coolant device, Drill chuck, Digital speed display, Digital drilling depth display Weight: 280 kg The machine is in good condition and ready for immediate use and can be inspected and demonstrated at our premises. We would be delighted if you are interested in our offer. Errors, changes and prior sale reserved.

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Storage location: Nattheim Bobu S U Ujvvi Auo Dewl

Condition: new, Year of construction: 2025, Heavy-duty design of the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency-stop pushbutton Drilling depth stop LED machine light integrated in the drill head Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel Drilling table can be tilted ± 45° and rotated 360 V-belt cover with safety switch Precision spindle bore Machine operation Safety electrics in 24 V DC voltage. Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Thick-walled steel column for high force absorption and stability Solid, large dimensioned base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/depth approx. 485 mm Bebeg Uaiuou S U U Dowl Height approx. 2040 mm weight approx. 162 kg Drilling capacity Drilling capacity steel (S235JR) 30 mm Continuous drilling capacity steel (S235JR) 25 mm Drilling table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slots size 14 mm T-slots number 2 Rotation 360 ° Inclination 45 ° Distance spindle - drilling table max. 784 mm Speed range Speed range 120 - 1810 min¯¹ Number of speed ranges 9 Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slots size 16 mm T-slots number 2 Spindle quill stroke 125 mm spindle mounting MK 4 throat 270 mm Location: Ex stock 54634 Bitburg - immediately available- [...]

Condition: good (used), Year of construction: 2017, Optimum Center Lathe - Optiturn TZ 4V - Year of manufacture 2017 - CE marking - 3-axis digital display - Center height 200 mm - Center width 800 mm - Swing over bed 400 mm - Swing over cross slide 245 mm - Speed range 50-3000 rpm / 2-stage - Spindle bore 52 mm - Automatic longitudinal / cross feeds - Threads / Metric / Inch / Diametrical / Modular thread - Drive motor 5.5 kW Bwsbu Sjwgbk Re U U Del - Tailstock MT3 - 2x three-jaw chucks - 4x multi-fix adapters - Fixed & follow-on steady rest - Chuck guard - Movable chip guard - Work light - Coolant system - Machine feet - Documentation Dimensions: L x W x H 2.1 x 1.2 x 1.7 meters / Weight 1400 kg Errors and input errors excepted

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V power capacity 1,5 kW dimensions of saw-band 2480 x 27 x 0,9 mm mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg Bebu Ssnlbmzj U U Dewl dimensions of the machine ca. 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Bwsbsuy S R Tou S U U Dsl Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: new, Bench drill OPTIMUM D 23 Pro-Set OPTIdrill - Exhibition machine - ----- Technical data ----- Number of speeds: 12 steps, Speed range: 200 - 2,440 rpm, Spindle stroke: 80 mm, throat depth: 180 mm, Table size: 280 x 245 mm, max. drilling capacity in steel: 25 mm, Motor: 750 watts, Columns Ø: 73 mm, Dimensions (LxWxH): 615 x 330 x 1,015 mm, Weight: 63.5 kg, Spindle holder: MK 2 Bench drill with V-belt drive - Industrial motor - User-friendly safety switch in accordance with IP 54 - Digital drilling depth and speed display integrated in the housing - Separate emergency stop switch - Precision spindle bore - Safety electrics with 24 V DC voltage - Guaranteed concentricity of less than 0.02 mm measured in the drill sleeve - Drill spindle with precision ball bearings - High-quality quick-action drill chuck - Drilling depth stop - Precisely machined, stable drill table with diagonal T-slots running diagonally and circumferential cooling water channel - V-belt cover with safety switch - One-piece cast aluminum Die-cast quill lever with soft-grip handles - Largely dimensioned, height-adjustable safety screen with safety switch - Heavy-duty design of the entire machine - GATES quality belt - Right/left rotation -- Scope of delivery Quick-action drill chuck 1 - 16 mm Morse taper MK 2 / B16, T-nuts Special offer set including machine vice BMS 100 - new exhibition machine - Bwebu S U Ueu R S Exe Dsl

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Bwsbsgd Si Esu S U U Del Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...]

Condition: as good as new (ex-display), Year of construction: 2024, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 50 CNC milling machine direct from the manufacturer. - Machine in column construction made of cast iron for high rigidity - Carousel tool changer with 8 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed control loop) - Maximum spindle speed of 10,000 min-1 - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs SINUMERIK 808 ADVANCED Bobujuy Nh Ne S U U Dewl CNC technology from the technology leader SINUMERIK 808D on PC - Control-identical software package that further simplifies the handling of the machine tool Compact and robust - Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments Communicative - Front panel USB (IP65) - Serial interface RS232C - RJ45 Ethernet on the rear - Technology-specific keyboard layout - Hard keys with protective membrane Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 10 kVA Milling spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 24 Nm Drive motor S6-30% operation 5.5 kW Torque drive motor S6-30% operation 36 Nm Spindle holder BT 30 Coolant system Coolant pump output 450 W Tank capacity 70 liters Milling accuracy Repeat accuracy 0.015 mm Positioning accuracy 0.015 mm Tool changer Carousel type Number of tool positions 8 positions Tool diameter max. 100 mm Tool length 200 mm Tool weight max. 6 kg Tool change time according to VDI 2852 7 seconds Travel distance X-axis 330 mm Y-axis 220 mm Z-axis 320 mm Feed drive Rapid traverse X-, Y-, Z-axis 15 m/min. Motor torque X-axis 3.5 Nm Y-axis 6 Nm Z-axis 6 Nm Speed range Speeds* 10,000 min-1 Pneumatics Air pressure 6 bar Milling table Distance spindle - table 90 - 410 mm Distance spindle - column 280 mm Table length x width 690 x 225 mm T-slot size / number / distance 14 mm / 3 / 63 mm Max. load 150 kg Dimensions Length x width x height 2,030 x 1,600 x 1,980 Total weight 1,900 kg

Condition: new, OPTIMUM OPTIsaw S275N metal band saw - Exhibition machine - Feed infinitely adjustable, tiltable ----- Technical data ----- Swivel range: 0 - 60 °, Cutting height: 150 mm, cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new exhibition machine - Bwjbu Seu R S Hpo U U Dol

Condition: new, Year of construction: 2025, OPTIturn TU 2004V - Lathe with infinitely variable speed control and digital speed display Picture shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Bwjbu Secnxrcs U U Djl Precise processing Heavily ribbed prismatic bed made of cast steel, inductively hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed concentricity of the spindle nose better than 0.009 mm Automatic length/lead spindle drive With longitudinal, cross and top slide Right-/left-handed rotation switchable in the control panel Emergency-stop pushbutton Rotary chuck protection Thrust bearing Lead screw mounted in two sintered bearings Large thread cutting range due to change gear set Simple and fast speed change via V-belt Change gearbox EMV filter class B (use in private households) Equipment details: Digital speed display Easy to read digital speed display Chip protection on the top slide Quadruple steel holder rotatable Roll rolled trapezoidal threads Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scaling 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Tapered roller bearings in P5 quality Cylindrical centering seat Hardened spindle nose with Ø 21 mm spindle bore Lathe chuck Concentricity better than 0,04 mm Scope of delivery: Three-jaw chuck Ø 100 mm centric clamping

Condition: as good as new (ex-display), Year of construction: 2025, S600M - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by performance, speed, precision, and long service life. • Heavy-duty design • Renishaw measuring arm for manual tool measurement • Recirculating ball screw with improved accuracy, rigidity, and heat resistance. • Siemens servo motors on all axes • 45° inclined bed design for particularly large machining diameters • Improved, unobstructed chip drainage into the chip tray • Hydraulic three-jaw lathe chuck Ø 200 mm • Sauter VDI 40 tool changer with 12 tool positions and driven tool • Hardened and precision-ground ball screws for high rapid traverse speeds in all axes • Dimensionally stable linear guides ensure a long service life through maximum static and dynamic rigidity • Manual tool measurement device • Tailstock with hydraulic quill • Portable, electronic handwheel with enabling button and emergency stop push button • Belt-type chip conveyor ensures efficient chip removal • Coolant system with cleaning gun Tools included: • 2 axial holders for driven tools • Radial holders for driven tools • 3 square cross-mounted holders • Square transverse mount • Square longitudinal mount • ER 32 collet set (6, 8, 10, 12, 16, 20 mm) • EMC (Electromagnetic Compatibility) Features Linear guide • Maximum static and dynamic rigidity • High positioning accuracy Tool turret • Hydraulic VDI 40 turret • All 12 stations are driven by an integrated motor designed for speeds up to 4,000 rpm Communicative • Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) card PPU 270 control system • 10.4" color display • 4:3 format System software • PPU 271 SW 24 Complete package • Safety Integrated • Residual material detection and processing • ShopMill Work Step Programming • Manage Network Drives • 3D Simulation • Simultaneous Recording • Dimensions and Weights Length approx. 4570 mm Width/Depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Working Areas Lathe Chuck Diameter 320 mm Turning Length 475 mm Swing Diameter over Machine Bed 570 mm Swing Diameter over Cross Slide 400 mm C-Axis (Factory Option) Angular Accuracy 51" Repeat Accuracy 20" Bsbu Sjwbc R Io U U Dewl Motor Torque X-Axis 11 Nm Z-Axis 11 Nm Speed Range Speed Range 30 – 4000 rpm Rapid Traverse Speed X-Axis 24 m/min Z-Axis 30 m/min Electrical Data Connection Voltage 400 V Electrical Connection Total Connected Load 40 kVA Accuracy Repeatability ± 0.002 mm Positioning accuracy ± 0.004 mm Hydraulic system Chuck diameter 51 mm Inclined bed 45° Tailstock MK 5 chuck mount Quill stroke 100 mm Quill diameter 100 mm Quill stroke, hydraulic control Spindle Spindle mount DIN ISO 702-1 No. 6 Main spindle: Hydraulic lathe chuck 200 mm Spindle taper A2-6 Main spindle: Spindle bore 65 mm Travel path X-axis 235 mm Z-axis 530 mm Vertical spindle Drive motor power, continuous operation S1: 11 kW Drive motor power, S6-30% operation: 22 kW Drive motor torque 70 Nm Drive motor power, S6-30% operation: 140 Nm Drive motor power 4.82 kW Maximum permissible speed at the tool coupling: 6000 rpm Maximum tool torque: 20 Nm

Condition: as good as new (ex-display), Year of construction: 2025, OPTIdrill D 26PRO - Column drilling machine Table and column drilling machine with V-belt drive User-friendly safety switch in accordance with IP 54 with undervoltage release and separate emergency stop switch 400 volt models with right/left rotation Drilling depth stop Precisely machined drilling table with diagonal T-slots Height adjustment of the drilling table via rack Bjbusdqzbno S U U Dswl Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast spindle lever made from one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electronics in 24 V direct current Guaranteed concentricity

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F 200 ECO Premium CNC milling machine, directly from the manufacturer. F 200 ECO - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by performance, speed, precision, and a long service life. Model F200 ECO Control SIEMENS SINUMERIK 828D PPU271.5 Milling spindle belt drive Bwobjwbc Aqsu S U U Djl Machine data Electrical connection 400 V / ~50 Hz Total connected load 20 kVA Milling spindle Drive motor S1 operating 9 kW Drive motor S1 operating 57 Nm Drive motor S6 operating 30% operating 17.1 kW Drive motor S6 operating 30% operating 118 Nm Spindle mount BT40 Drive motor S1 operating 10.5 kW Drive motor S1 operating 50 Nm Drive motor S6 operating 30% operating 26.4 kW Drive motor S6 operating 30% operating 125 Nm Cooling lubricant system Coolant pump power 3 x 1 kW Max. flow rate 35 l/min. Tank capacity: 200 liters Cleaning pump Cleaning pump power: 530 W Milling precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool changer: Double-arm gripper type Number of tool stations: 24 Max. tool diameter: 78 mm Max. tool diameter (adjacent tool positions not occupied): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time: tool to tool: 2.5 seconds Travel path: X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drive: Rapid traverse: X-, Y-, Z-axis: 48 / 48 / 48 m/min. Motor torque X / Y / Z-axis 16 Nm / 16 Nm / 20 Nm Feed forces X / Y / Z-axis 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds* 8,000 rpm Pneumatics Compressed air 6 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle to table 100 - 650 mm Table length x width 1,000 x 500 mm T-slot size / number / spacing 18 mm / 5 / 100 mm Maximum payload 500 kg Dimensions Length x width x height 2,400 x 2,355 x 2,860 mm Total weight 5,500 kg Equipment Shown with optional accessories Chip conveyor Linear guide with recirculating ball screw for high rapid traverse speeds in all axes Telescopic guide rail covers on all three axes Automatic lubrication Portable electronic handwheel with enabling switch and emergency stop button RJ45 connection and 230 V power connection Machine light in the work area Cleaning gun Ball screws and linear guides from THK Chip flushing system Cooling on the spindle head (cutting area) Control cabinet Arm-mounted tool changer SW24 CE

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Bjbu S Ueg U Uv Uo U Djwl Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: as good as new (ex-display), Year of construction: 2024, Optimum OPTIdrill RD 6 Precise, solid radial drilling machines of top quality. Ideal for versatile use in single-part and series production. • Versatile application range, such as drilling, reaming, and threading • Electrically braked motor • 24V DC electrical system and 2-channel safety chain according to DIN EN 12717 • Heavy, solid, high-quality cast iron • Wide reach thanks to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and travel axes • Elaborately machined column swivel with optimized clamping for maximum stability and minimal clamping offset • Robust, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and lifting spindle • Drill head gear running in an oil bath • Boom guideways hardened and precision-ground • Chrome-nickel steel gears, hardened and precision-ground, ensuring quiet and smooth operation • Drill head and column can be clamped together or separately or loosened • Right-left rotation • Solid, precise drilling table, generously dimensioned • Hardened and ground clamping table with parallel T-slots • Machine light • Overload protection • Thick-walled cast iron column ensures smooth operation and stability • LED lamp • Coolant system with coolant tank in the machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter 320 mm Length approx. 2670 mm Width/Depth approx. 1120 mm Height approx. 2760 mm Weight approx. 3200 kg Extension arm Rotation angle 180° Drilling capacity Drilling capacity steel (S235JR) 50 mm Continuous drilling capacity steel (S235JR) 45 mm Drilling table T-slot size 14 mm T-slots Number: 4 T-slot spacing: 180 mm Maximum distance between spindle and drilling table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Number of T-slots on the clamping table: 3 Clamping table T-slot spacing: 150 mm Min. distance between spindle and clamping table: 0 mm Max. distance between spindle and clamping table: 910 mm Bwsbuowa Tc Sj S U U Djl Min. distance between spindle and drilling table: 465 mm Speed range: Speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical data: Total power consumption: 6.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine base: Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor drive power: 4 kW Drive power Cantilever arm lifting motor 1.5 kW Coolant pump power of drive motor 90 W Hydraulic clamp drive 0.75 kW Spindle Quill stroke 270 mm Spindle mount MT5 Quill feed speed 0.06 – 0.2 mm/rev Quill feed speeds 3 Travel path Drill head travel (horizontal) 1250 mm Arm stroke (vertical) 680 mm Maximum spindle-column distance 1600 mm Minimum spindle-column distance 350 mm

Condition: excellent (used), Year of construction: 2001, Optimum D 1340 GDE year 2001, top condition - as a training machine - Turning diameter over bed 330 mm Turning diameter over support 160 mm Turning length 800 mm Total power requirement 2 kW Machine weight approx. 400 kg Space requirement approx. 2000x1000x1600 mm Bar diameter 38 mm Speed range Bwebu S U Usvutyhs Del 70 - 2000 rpm Spindle nose Feed range 0.025 - 2.553 mm/rev Suitable for threads: Metric 0.25 - 11 mm Suitable for threads: Inch 4 - 112 Gg/" Tailstock: MK 3 Control Conventional 3-jaw chuck Location: from stock 54634 Bitburg - available at short notice -

Condition: as good as new (ex-display), Year of construction: 2025, OPTIsaw 131 GH - Metal band saw ideal for light sawing work. Mitre sawing from -45° to +60° via swivelling saw bow Metal band saw with low noise operation 3 saw band speeds Ball bearing mounted 3-point saw band guide Three switchable saw band speeds Bwsbuob S Uzro S U U Del Quick hold of the workpiece due to quick clamping vice Standard with high quality bi-metal saw band Base plate and saw bow made of grey cast iron Material stop emergency stop impact switch, motor protection switch Easy to read scale for angle adjustment Scope of delivery: Material stop Bi-metal saw band (10-14 ZpZ) Machine base Technical data Cutting range 0° Round Ø 128 mm Cutting range 0° rectangle 100 x 150 mm Cutting range 45° round Ø 94 mm Cutting range 45° rectangle 94 x 78 mm Cutting range 60° round Ø 56 mm Cutting range 60° rectangle 56 x 56 mm Lifting the saw-bar manually Feed infinitely variable saw band speeds 22/31/55 m/min. Saw band dimensions 1638 x 13 x 0.65 mm Motor power 1,1 kW 230 V ~50 Hz Dimensions Length 1000 mm Width 530 mm Height lower end position saw bow 1060 mm upper end position saw bow 1320 mm Net weight Location: Ex warehouse 54634 Bitburg