Used Optimum Opti B33 Pro Vario for sale (113)

Condition: not inspected (used), machine/vehicle number: 3011233, 1 Bench drill press, manufacturer: Optimum, type: OPTIB33 PRO VARIO, serial number: 3011233, year of manufacture: unknown, stroke: 100 mm, drilling capacity: 30 mm, with 1 machine vise, jaw width: 125 mm. Lrsdpfx Aezg D Agjl Isn

Condition: good (used), Code: 0415 Brand: OPTIMUM Model: OPTI B 33 PRO - CE Standard Pillar drill with base for wood, metals and various – CE Standard Lrsdpfx Ajzfglusl Ijn Technical data: Spindle diameter 16 mm Three-phase motor 1100 W N° 9 speed (spindle speed rpm 120/210/250/360/400/440/940/1260/1810) Table dimensions mm 475 x 425 height-adjustable Table tilting up to 45° Table rotating 360° Column diameter 92 mm Drilling depth stop Safety guard Max distance between spindle and base 1180 mm Overall dimensions mm 500 x 870 x 1700 h Weight kg 135

Condition: used, bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm spindle taper MK 3 number of spindle speeds 12 spindle speed: 35 - 5600 Upm Ljdpfxefbh Aks Al Iern column diameter 92 mm table-size 340 x 360 mm table rotating 360 ° total power requirement 1,5 kW weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm

Condition: as good as new (ex-display), Year of construction: 2026, OPTIdrill D 26PRO - Pillar drilling machine Bench and pillar drilling machine with V-belt drive User-friendly safety switch according to IP 54 with undervoltage release and separate emergency stop button 400-volt models with right/left rotation Drilling depth stop Precisely manufactured drilling table with diagonally running T-slots Height adjustment of the drilling table via rack and pinion Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Lrodpfxedqzbnj Al Ien Aluminum die-cast quill lever in one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electricals in 24 V DC Guaranteed run-out accuracy

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Lsdpfx Asvvi Auol Ijrn Storage location: Nattheim

Condition: used, Year of construction: 2003, x-travel:930 mm y-travel:400 mm z-travel:406 mm turning speeds:9-6750 1/min table::1370 x 254 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,15 mm/U bore capacity in steel:32 mm feed range:19 - 890 (x) mm/min spindle cone:SK 40 column arm:200 - 680 mm total power requirement:4 kVA weight of the machine ca.:1,15 t dimensions of the machine ca.:1,5 x 1,45 x 2,2 m Lrodpfxjt U Rm Is Al Ijn 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: used, spindle taper 750 W // 400 V // 50 Hz Lsdet Rmbyspfx Al Iern Boring power 25 mm connected load MK 2

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. All linear guides with stainless steel covers Automatic central lubrication Servo drive from SIEMENS in all axes (open control loop) Max. Spindle speed 4000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Tools can be changed at the touch of a button Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance Dimensions and weights Length approx. 1410 mm Width/depth approx. 1372 mm Height approx. 2007 mm Weight approx. 1000 kg Drilling/milling capacity Cutter head size max. 50 mm End mill size max. 25 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 5 kVA Horizontal milling table Length 620 mm Width 180 mm Distance vertical spindle - milling table min. 50 mm Distance vertical spindle - milling table max. 295 mm T-slots size 12 mm Number of T-slots 3 T-slot spacing 50 mm Load max. 30 kg Accuracy Repeat accuracy ± 0.02 mm Lredpeymkkfofx Al Ien Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 95 W Tank capacity 30 l Travel distance X-axis automatic 355 mm Y-axis automatic 190 mm Z-axis automatic 245 mm Vertical spindle Spindle holder BT 30 Speed range 4000 min¯¹ Explanation Speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation Power drive motor continuous operation S1 1.5 kW Power drive motor S6-30 % operation 2.2 kW Torque drive motor continuous operation S1 9.5 Nm Torque drive motor 30% operation S6 14 Nm Feed rate Speed X-axis 10000 mm/min Y-axis 10000 mm/min Z-axis 10000 mm/min Feed motor torque X-axis continuous operation S1 1.9 Nm Y-axis continuous operation S1 3.5 Nm Z-axis continuous operation S1 3.5 Nm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 355 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 245 mm, spindle speed (max.): 3,000 rpm, table width: 180 mm, table length: 530 mm, TECHNICAL DETAILS Number of axes: 3 X-axis travel: 355 mm Y-axis travel: 190 mm Z-axis travel: 245 mm Max. spindle speed: 3,000 rpm Interface: BT30 Table size (length): 530 mm Table size (width): 180 mm Max. workpiece weight: 30 kg Control type: Siemens 808D Control system: CNC Motor power: 1.5 kW MACHINE DETAILS Dimensions (L x W x H): 1,400 x 1,380 x 2,000 mm Transport weight: 1,400 kg Number of transport packages: 1 Lrjdjw Tzkiepfx Al Isn Documentation available: Yes CE marking: Yes EQUIPMENT - Siemens 808D control - CNC controlled - Documentation available - CE marking - Large vise - Indexing head - Precision vise - 19 BT30 tapers - ER32 and ER25 collet sets - CamBamPro with license (drawing/programming) and postprocessor configured for Siemens - Complete technical documentation

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Lrjdex Hdq Tepfx Al Ion Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Condition: used, Year of construction: 2014, throat 180 mm quill stroke 80 mm continious capacity 20 Ljdpfx Aloxbtrge Iern spindle taper MK 2 table-size 280 x 245 mm height of the machine ca. 1000 m column diameter 73 mm distance spindle /table max. 425 mm dimensions ca. 615 x 330 x 1015 mm weight ca. 60 kg incl. vice HM Müller HT100P

Condition: new, Year of construction: 2022, Power: 1.1 kW Drilling capacity in steel / Continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Speed settings: 9 Spindle mount: MK-4 Drilling stroke: 120 mm Spindle overhang: 254 mm Ledpfx Alegulr Hs Iern Table size: 475 mm x 425 mm Tilting / rotating of the drilling table: 45° to the left / 360° Column diameter: 80 mm Quick-change drill chuck: 1 - 16 mm Weight: 132 kg

Condition: used, capacity 90 degrees: round 115 mm capacity 90 degrees: flat 100 x 150 mm Ljdeyy A Rfjpfx Al Iern band saw dimensions 1638 x 13 x 0,65 mm 20/29/50 m/min

Condition: used, Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Lredpfx Aljzg H H Uj Ion Weight: approx 350 KG

Year of construction: 2017, condition: ready for operation (used), X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening width: 1055mm, foundation/installation area: 1520x2080mm, weight: 2.8t. An on site inspection is possible. Lredpfx Aszcfk Ejl Ijn

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 460 mm turning diameter over support: 388 mm turning length: 1016 mm centre distance: 1016 mm center height measured in bed: 230 mm turning dia. in gap: 640 mm spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 2000 / 12 step U/min feeds:: längs: 0,032 - 0,898 mm/U feeds:: plan: 0,016 - 0,449 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 3,75 kW weight of the machine ca.: 1,6 t dimension machine xH: 2,1 x 1,1 x 1,5 m Switchable gearbox Quantum 3-way length measuring system Top slide adjustment +/-90° Multifix quick-change steel holder 3-jaw chuck Ø 200mm rotating center in tailstock Threads: Inch thread; Metric thread; Trapezoidal thread; Module thread Accessories: Lrodpfx Alsu Ixzbe Ien Change gears, machine feet, 1x fixed quill tip *

Condition: excellent (used), Year of construction: 2003, cutting diameter 128 mm Lrodjxbh Hfopfx Al Ien saw band length / mm table height / mm

Condition: good (used), Year of construction: 2017, operating hours: 60 h, functionality: fully functional, machine/vehicle number: 333840, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 510 mm, spindle mount: MK 3, quill travel distance: 120 mm, type of input current: three-phase, table width: 210 mm, input voltage: 400 V, table length: 750 mm, drilling capacity: 32 mm, distance table center to spindle nose: 275 mm, rotational speed (max.): 3,200 rpm, rotational speed (min.): 95 rpm, rapid traverse X-axis: 240 m/min, Equipment: documentation/manual, The milling machine is fully functional and can be tested. It is being sold due to the purchase of a larger model. Technical documentation is available. The milling machine has a robust base cabinet housing the coolant pump. The automatic table feed features: Lrjdpfoyrib Tox Al Isn - Emergency stop function, no automatic restart - Infinitely variable speed control and rapid traverse - Left/right feed direction - Overload protection and limit switches - Speed: 0 - 165 rpm - Rapid traverse: 240 rpm Three-axis position display, accuracy class 0.01 mm.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, total height: 2,200 mm, total width: 2,164 mm, table load: 300 kg, overall weight: 2,800 kg, spindle speed (max.): 100,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis Optimum Optimill F105 was manufactured in 2015. It features an X-axis travel of 550 mm, Y-axis travel of 305 mm, and Z-axis travel of 460 mm. The machine is equipped with a spindle power of 7.5 kW and a maximum spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the Optimum Optimill F105 vertical machining centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 10,000 mm/min • Work table size: 800 × 320 mm Lodpszg Ecbjfx Al Iorn Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 4,000 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 550 mm, total height: 2,000 mm, total width: 1,870 mm, overall weight: 3,200 kg, controller manufacturer: SIEMENS, product length (max.): 4,050 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2015. This Optimum OPTIturn S 600 features a turning diameter of 320 mm and a turning length of 550 mm. It includes a hydraulic turret with 12 tool slots and a spindle speed range of 30 – 4000 min¯¹. If you are looking to get high-quality turning capabilities, consider the Optimum OPTIturn S 600 machine we have for sale. Contact us for further details. • Turning diameter: 320 mm • Turning length: 550 mm • Swing diameter above machine bed: 550 mm • Swing diameter above cross-slide: 370 mm • Main spindle bore: 76 mm • Spindle bore with hydraulic chuck: 200 mm • Spindle taper: A2-6 • Drive motor output: S1 (continuous) 11 kW; S6-30% 14.3 kW • Turret type: Hydraulic VDI 30 • Number of tool slots: 12 • Rapids movement X/Y-axis: 30/36 m/min • Tailstock chuck: MT4 Ledezg Eamspfx Al Iern • Quill stroke: 80 mm • Quill diameter: 75 mm • Total rated value: 30 kVA Technical Specification Counter Spindle No Driven Tools No

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Lrsdpfxjw Rhk Rs Al Ien Location: Flörsheim

Condition: good (used), Year of construction: 2006, Precision lathe, lathe, lead screw lathe, lead screw lathe Ljdpfx Alozd Eqye Iorn -Manufacturer: OPTIMUM, Lead screw and feed screw lathe type D320X920 -Machine bed: hardened -Turning length: 930 mm -Turning diameter over bed: 320 mm -Turning diameter without bed: 500 mm -Turning diameter over support: 180 mm -Spindle bore: Ø 40 mm -Spindle speeds: 65 - 1800 rpm -Three-jaw chuck: Ø 160 mm -Tailstock mount: MK3 -Drive: 1.5 kW -Accessories: 2x bezels, Multifix tool holder, see photos -Dimensions: 730/1590/H1310 mm -Weight: 525 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, Final price, as differential tax applies according to §25a of the German VAT Act (UstG). You will receive a proper invoice! Internal article number: 26043 CNC milling machine Optimum F100 Year of manufacture: 2007 The machine comes from a public educational institution. Control system: Siemens Sinumerik 802 S base line RS232 interface Spindle mount: ISO40 Speed: 100 - 6000 rpm Travel distances: X 450 / Y 300 / Z 400 mm Table: 920 x 280 mm Lrsdpfxozb I Tgj Al Ien Table load: 300 kg + Operating manual + Programming manual + Electrical wiring diagram + Accessories (Various tool holders, including various MK4 holders (reduction from basic mount to MK4 available)) + 2-axis digital display Heidenhain + Operating manual + Coolant pump Speed: 90 - 1800 rpm Travel distances: X 400 / Y 200 / Z 400 mm Feed rate: 10 - 160 mm/min Rapid traverse: 900 mm/min Power: 1.6 kW / 380V L x W x H: 150 x 150 x 175 cm Weight: 1300 kg The machine is fully functional and can be inspected in operation by arrangement, in our heated warehouse with over 500 m² of space.

Condition: new, Year of construction: 2026, Heavy-duty design for the entire machine High running smoothness thanks to a new spindle design Industrial motor Separate emergency stop switch Drill depth stop LED machine light integrated into the drill head Precisely machined, stable drill table with diagonally arranged T-slots and an all-around coolant channel Drill table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Precision spindle bore Machine control and safety electronics in 24 V DC Guaranteed concentricity accuracy ≤ 0.02 mm measured in the drill spindle Thick-walled steel column for high force absorption and stability Massive, generously sized base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/Depth approx. 485 mm Height approx. 2040 mm Weight approx. 162 kg Drilling capacity Drilling capacity in steel (S235JR) 30 mm Continuous drilling capacity in steel (S235JR) 25 mm Drill table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slot size 14 mm Number of T-slots 2 Rotation 360° Tilt 45° Distance spindle - drill table max. 784 mm Lredeg Uaiuepfx Al Ien Speed range Speed range 120 – 1810 min⁻¹ Number of speed ranges 9 Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slot size 16 mm Number of T-slots 2 Spindle Quill stroke 125 mm Spindle mount MK 4 Overhang 270 mm Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Optimum Optisaw SD 500 Double miter metal bandsaw with swiveling saw blade Art. No. 3292380 Length approx. 2122 mm Width/Depth approx. 1046 mm Height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power, coolant pump 100 W Total connected load 3.8 kW Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 35 / 70 m/min Saw blade length 3770 mm Saw blade width 34 mm Saw blade thickness 1.1 mm Cutting angle 45 – -60 ° Lsdpfx Alegd Si Es Isrn Feed Hydraulic via lowering cylinder Raising the saw blade manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular, vertical (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangular, vertical (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangular, vertical (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangular, vertical (solid material) 180 x 220 mm Heavy-duty industrial design Low-noise operation High cutting accuracy due to vibration-free operation Miter adjustment from -45° to 60° by swiveling the entire saw blade Supplied as standard with high-quality bi-metal saw blade Microswitch for automatic end shut-off Coolant pump Ball-bearing saw blade guide with carbide inserts for optimal cutting results Easy adjustment of the lowering speed by means of a flow control valve in the control panel Large, quick-release vice, laterally adjustable Clear control panel Location: In stock, 54634 Bitburg - immediately available -