Used Optimum Opti S300 Vg for sale (104)

Condition: good (used), Year of construction: 2017, operating hours: 60 h, functionality: fully functional, machine/vehicle number: 333840, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 510 mm, spindle mount: MK 3, quill travel distance: 120 mm, type of input current: three-phase, table width: 210 mm, input voltage: 400 V, table length: 750 mm, drilling capacity: 32 mm, distance table center to spindle nose: 275 mm, rotational speed (max.): 3,200 rpm, rotational speed (min.): 95 rpm, rapid traverse X-axis: 240 m/min, Equipment: documentation/manual, The milling machine is fully functional and can be tested. It is being sold due to the purchase of a larger model. Technical documentation is available. The milling machine has a robust base cabinet housing the coolant pump. The automatic table feed features: - Emergency stop function, no automatic restart Gjdpfxsyrib Ts Ah Setw - Infinitely variable speed control and rapid traverse - Left/right feed direction - Overload protection and limit switches - Speed: 0 - 165 rpm - Rapid traverse: 240 rpm Three-axis position display, accuracy class 0.01 mm.

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 460 mm Gtedeu Ixzbspfx Ah Sjw turning diameter over support: 388 mm turning length: 1016 mm centre distance: 1016 mm center height measured in bed: 230 mm turning dia. in gap: 640 mm spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 2000 / 12 step U/min feeds:: längs: 0,032 - 0,898 mm/U feeds:: plan: 0,016 - 0,449 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 3,75 kW weight of the machine ca.: 1,6 t dimension machine xH: 2,1 x 1,1 x 1,5 m Switchable gearbox Quantum 3-way length measuring system Top slide adjustment +/-90° Multifix quick-change steel holder 3-jaw chuck Ø 200mm rotating center in tailstock Threads: Inch thread; Metric thread; Trapezoidal thread; Module thread Accessories: Change gears, machine feet, 1x fixed quill tip *

Condition: excellent (used), Year of construction: 2003, cutting diameter 128 mm saw band length / mm Gtedpfx Ahoxbh Hfe Sjw table height / mm

Condition: used, bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm spindle taper MK 3 number of spindle speeds 12 spindle speed: 35 - 5600 Upm column diameter 92 mm table-size 340 x 360 mm table rotating 360 ° total power requirement 1,5 kW weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm Gtsdpfxjfbh Ake Ah Ssw

Condition: used, Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Gtjdpfx Ahoxugnuo Ssw Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Condition: new, Bench drill OPTIMUM D 23 Pro-Set OPTIdrill - Exhibition machine - ----- Technical data ----- Number of speeds: 12 steps, Speed range: 200 - 2,440 rpm, Spindle stroke: 80 mm, throat depth: 180 mm, Table size: 280 x 245 mm, max. drilling capacity in steel: 25 mm, Motor: 750 watts, Columns Ø: 73 mm, Dimensions (LxWxH): 615 x 330 x 1,015 mm, Weight: 63.5 kg, Spindle holder: MK 2 Bench drill with V-belt drive - Industrial motor - User-friendly safety switch in accordance with IP 54 - Digital drilling depth and speed display integrated in the housing - Separate emergency stop switch - Precision spindle bore - Safety electrics with 24 V DC voltage - Guaranteed concentricity of less than 0.02 mm measured in the drill sleeve - Drill spindle with precision ball bearings - High-quality quick-action drill chuck - Drilling depth stop - Precisely machined, stable drill table with diagonal T-slots running diagonally and circumferential cooling water channel - V-belt cover with safety switch - One-piece cast aluminum Die-cast quill lever with soft-grip handles - Largely dimensioned, height-adjustable safety screen with safety switch - Heavy-duty design of the entire machine - GATES quality belt - Right/left rotation -- Scope of delivery Quick-action drill chuck 1 - 16 mm Morse taper MK 2 / B16, T-nuts Special offer set including machine vice BMS 100 Gedpou R S Exjfx Ah Sjtw - new exhibition machine -

Condition: new, Drilling and Milling Machine OPTIMUM OPTImill MB 4 - Exhibition Machine - This offer is for an equipment package. The following items and options are already included in the price: - Drilling and milling machine OPTImill MB 4 Optimum - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum Gtjdpeu R Tftefx Ah Sew - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 1,600 rpm, total height: 1,430 mm, overall weight: 3,920 kg, This Optimum D 560x3000 was manufactured in 2011. It features a spindle bore of 80 mm, a swing diameter over bed of 560 mm, and a maximum workpiece weight of 600 kg. The machine offers a spindle speed up to 1600 rpm and includes a coolant pump. Ideal for precision turning operations. Contact us for more information. Additional equipment • Lead Screw Thread Pitch: 6mm • Longitudinal Feed [mm/rev] in the Range: 0.059 - 1.646 • Cross Feed [mm/rev] in the Range: 0.020 - 0.573 • Metric Pitch [mm/rev] in the Range: Gtedpox Nr S Rofx Ah Sow • Inch Pitch [Threads/Inch] in the Range: 112 - 2 • Modular Threads in the Range: • Diametrical Threads (ISO 678) in the Range: 4 - 112 Machine Benefits Technical Machine Benefits • Top slide adjustment range: • Top slide travel (mm): 130 • Cross slide travel (mm): 326 • Center height (mm): 280 // center width (mm): 3010 // bed width (mm): 350 • Swing diameter in bed bridge (mm): 788 • Passage of stationary steady rest (mm): 19-165 • Passage of follower steady rest (mm): 16-95 • Special stationary steady rest (not included) (mm): 0-270 • Turning length in bed bridge (mm): 200 • Spindle mount: camlock asa d 1-8 Extra Information Tail Stock Tailstock - Transverse Adjustment (mm): +-13 Tools Maximum Tool Holder Size for Turning Tools in Quadruple Tool Holder (mm): 25x25 Media Total Connected Load: 3 x 400V / 8 kW ~ 50 Hz Spindle Motor Drive Power: 3 x 400V / 7.5 kW ~ 50 Hz Coolant Pump: 3 x 400V / kW ~ 50 Hz Machine Lighting: kW Control Voltage: 24 V / 160 VA Dimensions Machine Depth 4400 mm

Condition: used, Year of construction: 2016, Milling machines Travel distance X: 760 mm Travel distance Y :430 mm Travel distance Z: 460 mm Number of axis: 3 milling machine / machining center Gsdpsyqxy Aefx Ah Sotw Control: Siemens Sinumerik 828D CNC spindle chuck: SK40 spindle revolutions: 10000 rpm Speed range from: 10 U/min Speed range to: 10000 U/min table size X: 900 mm table size Y: 410 mm max. workpiece weight: 350 kg tool changer: 24 - time input Power : 12 kW feed rate: 10000 mm/min control Siemens Through-spindle coolant: 30 bar Renishaw Touch Probe

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 4350 kg Measurements height 2310 mm Measurements depth 1950 mm Dimensions Machine Length 3000 mm Main Drive Gtjdpfxsx H U Euj Ah Sjw Number of axis 3 Spindle Speed 10000 RPM Spindle motor power 9 kW Movement X-Axis Movement 760 mm Z-Axis Movement 460 mm Y-Axis Movement 440 mm Tools Max weight 8 kg This 3-axis Optimum Optimill F150 was manufactured in 2017 and features a Siemens Sinumerik 828D control system, a vertical spindle type SK40 with a speed range of 10-10,000 rpm, and a carousel tool changer with a 16-tool capacity. It supports a maximum table load of 350 kg and includes a screw-type chip conveyor. If you are looking to get high-quality milling capabilities, consider the Optimum Optimill F150 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2022, condition: new, Motor power: 1,1kW / 230V Cutting area: 100mm x 145mm feed: stepless Gtjdegulr Aepfx Ah Sow saw band speed: 22 / 31 / 55 m/min Saw band dimension: 1638 x 13 x 0.65 mm Cutting angle: -45° to 60 Dimension: 1085mm x 498mm x 978mm Weight: 78kg

Year of construction: 2025, condition: new, Motor power: 1,1kW / 400V Cutting area: 100mm x 145mm Coolant device: Yes Feed: stepless Saw band speed: 45 /90 m/min Saw band dimension: 2480 x 27 x 0.9 mm Cutting angle: 0° to 60 Dimension: 1400mm x 685mm x 1235mm Gsdpjha Nz Ujfx Ah Setw Weight: 185kg

Condition: as good as new (ex-display), Year of construction: 2021, Machine is on display. Optimill F 310 HSC Premium CNC milling machine, directly from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile guideway with roller circulation in all axes for high load capacity • High-torque servo drives, directly mounted to ball screws on all three axes • Precision-ground, preloaded high-performance ball screws for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precision-ground milling table with five T-slots, large dimensions • Portable electronic hand wheel with enabling button and emergency stop switch, significantly simplifies program setup • Tool changer arm gripper with 30 tool positions • Coolant unit with chip flushing system and cleaning pistol • Through-spindle coolant with 20 bar pressure • Belt-type chip conveyor ensures efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: material defect warranty and free online/on-site service OSS Plus • 1-year maintenance contract Basic included for DE/AT/CH Control • 15.6" color display • 16:9 format Total package • Safety Integrated • Raw material recognition and processing • ShopMill step programming • Network drive management • 3D simulation • Drawing function Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 12,000 rpm Dimensions and weights • Length approx. 4319 mm • Width/depth approx. 2300 mm • Height approx. 3000 mm • Weight approx. 7000 kg Rapid traverse speed • X-axis 30 m/min • Y-axis 30 m/min • Z-axis 30 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Total connected load 56 kVA Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 16 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel • X-axis automated 1050 mm • Y-axis automated 600 mm • Z-axis automated 600 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 12,000 rpm • Drive motor output continuous S1 20 kW • Drive motor output S6-30% operation 50.3 kW • Drive motor torque continuous S1 96 Nm • Drive motor torque 30% operation S6 240 Nm Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 10 kN Feed motor torque • X-axis continuous S1 18 Nm • Y-axis continuous S1 18 Nm • Z-axis continuous S1 27 Nm Tool changer • Double arm gripper • Number of tool positions 30 • Maximum tool length 300 mm • Maximum tool weight 8 kg • Tool-to-tool change time 2.5 s Gtodpfx Ahjynf Uno Sjw

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 828D is characterized by performance, speed, precision and long service life. Heavy-duty design - Compact design - .SIEMENS servomotors in all axes Gtsdpfxjymlhrj Ah Sew - Renishaw measuring arm for tool measurement - All servomotors with integrated encoder for maximum accuracy - Main spindle designed as motor spindle - 45° inclined bed design for particularly large machining diameters and unhindered chip flow into the chip flow into the chip tray - Hydraulic three-jaw lathe chuck Ø 170 mm with soft jaws - Servo tool changer VDI 30 with 12 tool positions - Hardened and precision-ground ball screws for high rapid traverse speeds in all axes axes - Faster tool change speed - High hydraulic clamping force - Heavy-duty cutting without vibration, to realize machining automation and high efficiency in extreme cases - Dimensionally stable linear guides ensure a long service life thanks to maximum static and dynamic rigidity rigidity - Device for manual tool measurement - Heat exchanger - Portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs. programs considerably - Belt-type chip conveyor ensures efficient chip removal - Work light for complete illumination of the work area - Coolant device with cleaning gun - RJ45 and power interface - EMC (electromagnetic compatibility) - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus see "Additional package SIEMENS OSS Plus" on page 117 - 1 year maintenance contract Basic included Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 25 kVA Spindle Drive motor S1 operation 11.6 kW Torque drive motor S1 operation 65 Nm Drive motor S6-30% operation 14.4 kW Torque drive motor S6-30% operation 81 Nm Spindle holder A2-5 Spindle bore Ø 56 mm Chuck opening Ø 45 mm Hydraulic lathe chuck Ø 170 mm Coolant system Coolant pump power 700 W Tank capacity 160 liters Hydraulic system Hydraulic pump output 1.5 kW Tank capacity 36 liters Machine data Turning Ø max. 220 mm Turning length 320 mm Rotation Ø over cross slide 300 mm Rotation Ø over machine bed 500 mm Inclined bed 45° Speed range Spindle speeds* 30 - 6,000 min-1 Tool changer Type Servo VDI 30 Number of tool positions 12 Accuracy Repeat accuracy ± 0.004 mm Positioning accuracy ± 0.004 mm Travel distance X-axis 180 mm Z-axis 350 mm Feed force Dynamic X-axis 3.6 kN Z-axis 3.6 kN Feed speed X-axis / Z-axis 30 m/min. Motor torque X-axis / Z-axis 6 Nm Dimensions Length x width x height 2,000 x 2,250 x 1,550 mm Total weight 2,600 kg

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Gsdpeymlf Refx Ah Setw Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Godsymlfkjpfx Ah Sjtw Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optiturn Premium CNC lathe directly from the manufacturer. S600M – The OPTIMUM Premium CNC lathe equipped with a Siemens SINUMERIK 828D control system. • Heavy-duty construction • Renishaw measuring arm for manual tool measurement • Ball screw with enhanced precision, rigidity, and thermal stability • Siemens servo motors on all axes • All servo motors with integrated encoders for maximum accuracy • 45° slant bed design for particularly large workpieces • Hydraulic three-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool stations and driven tool capability • Hardened and precision-ground ball screws for high rapid traverse speeds on all axes • Manual tool measurement setup • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling button and emergency stop impact switch greatly simplifies program setup • Belt-style chip conveyor • Worklight for complete illumination of the work area • Coolant system with cleaning gun Linear Guideways • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic turret head VDI 40 • All 12 turret stations powered by an integrated motor capable of speeds up to 4,000 rpm Machine Bed • Heavily ribbed • 45-degree inclination • High rigidity and durability • Facilitates chip removal SAFETY Integrated – Setup with the door open • Functional safety also protects against high costs! Complete Package • Safety Integrated • Remnant detection and machining • ShopMill step programming • Manage network drives • 3D simulation • Remote view/assistance SIEMENS OSS Plus Additional Package • 12 months; Item no. 3589020 • 24 months; Item no. 3589021 • 36 months; Item no. 3589022 Dimensions and Weights Length approx. 4570 mm Width/depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Work Area Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-Axis (factory option) Angular accuracy: 51 '' Repeatability: 20 '' Motor Torque X-axis: 11 Nm Z-axis: 11 Nm Gedoymk Ukjpfx Ah Sstw Speed Range Speed range: 30 – 4000 rpm Rapid Traverse Speed X-axis: 24 m/min Z-axis: 30 m/min Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 40 kVA Accuracy Repeatability: ± 0.002 mm Positioning accuracy: ± 0.004 mm Chuck passage diameter: 51 mm Slant bed: 45° Tailstock Mount: MT 5 Quill stroke: 100 mm Quill diameter: 100 mm Quill actuation: hydraulic Spindle Spindle nose: DIN ISO 702-1 No. 6 Main spindle hydraulic chuck: 200 mm Spindle taper: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical Spindle Drive motor power S1 continuous duty: 11 kW Drive motor power S6-30% duty: 22 kW Drive motor torque: 70 Nm Drive motor torque S6-30%: 140 Nm Feed Force Feed force, X-axis: 8.4 kN Feed force, Z-axis: 5.6 kN Tool Turret Type: Servo VDI 40 - DIN 5480 Number of tool stations: 12 Drive motor power: 4.82 kW Max. permissible speed at tool coupling: 6000 rpm Max. tool torque: 20 Nm

Condition: as good as new (ex-display), Year of construction: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe – directly from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Dimensions and Weight: - Max. width/depth: 2300 mm - Approx. length: 2530 mm - Approx. width/depth: 1595 mm - Approx. height: 1795 mm - Approx. weight: 2600 kg Working Range: - Chuck diameter: 150 mm - Chuck clamping actuation: hydraulic - Centre height: 223 mm - Centre distance: 850 mm - Swing diameter over bed: 446 mm - Swing diameter over gap: 520 mm - Swing diameter over cross slide: 240 mm - Bed width: 300 mm Gtodpfxeymkwro Ah Sow Servo Torque: - X-axis: 6 Nm - Z-axis: 8.5 Nm Spindle Speed Range: - Number of speed ranges: 1 - Spindle speed range: 10 – 3000 rpm Electrical Data: - Drive motor power: 7 kW - Voltage: 400 V - Network frequency: 50 Hz - Total connected load: 23 kVA Accuracy: - Repeatability: ± 0.005 mm - Positioning accuracy: ± 0.005 mm Hydraulic System: - Motor power: 0.75 kW - Tank capacity: 50 l Ball Screw: - X-axis diameter: 25 mm - X-axis lead P: 5 mm - X-axis accuracy grade: C3 - Z-axis diameter: 40 mm - Z-axis lead P: 5 mm - Z-axis accuracy grade: C3 Coolant System: - Coolant pump power: 270 W - Tank capacity: 90 l Machine Data: - Spindle bore diameter: 40 mm - Drive motor torque: 33 Nm Tailstock: - Taper: MT 4 - Quill travel: 165 mm - Quill diameter: 52 mm Spindle: - Spindle nose: DIN ISO 702-1 No. 5 - Spindle bore/bar capacity: 52 mm Controller: - Type: Sinumerik 828D PPU 240 - System software: SW 24 - CNC memory: 3 MB - Look Ahead: 50 - Block change time: 3 ms - Number of tools: 128 Travel: - X-axis: 250 mm - Z-axis: 760 mm Vertical Spindle: - Drive motor continuous power S1: 7 kW - Drive motor S6-30% duty cycle power: 16 kW - Drive motor torque: 33 Nm - Drive motor torque S6-30% duty cycle: 80 Nm Feed Rate: - X-axis: 15,000 mm/min - Z-axis: 15,000 mm/min Feed Force: - X-axis: 7.5 kN - Z-axis: 5.3 kN Tool Changer: - Type: hydraulic; VDI 30 - Number of tool stations: 8 - Max. square tool shank height/width: 20 x 20 mm - Max. boring bar diameter: 25 mm Features: - Siemens spindle and servo motors - Full enclosure with safety interlock - Standard with max. spindle speed up to 3000 rpm - Automatic central lubrication - Swiveling control panel - Tailstock cover - Electronic hand wheels for X and Z axes - Coolant system with 90-liter tank - RJ45 connection, USB port, and 230 V power socket - EMC (Electromagnetic compatibility) - Six leveling feet - Operator tools included SINUMERIK 828D Basic – COMPLETE PACKAGE - Safety Integrated - Remainder material detection and machining - ShopTurn step programming - Network drive management - 3D simulation - Graphical tracking Control: - 10.4” color display - 4:3 format - User-friendly SINUMERIK Operate software - Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) Card Guides: - Rigid flat-bed guideways Ball Screw: - For high rapid traverse speeds on all axes - Reduced wear - High positioning and repeat accuracy

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. All linear guides with stainless steel covers Automatic central lubrication Servo drive from SIEMENS in all axes (open control loop) Max. Spindle speed 4000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Tools can be changed at the touch of a button Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). Gtedpfx Ajymkkfoh Sjw SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance Dimensions and weights Length approx. 1410 mm Width/depth approx. 1372 mm Height approx. 2007 mm Weight approx. 1000 kg Drilling/milling capacity Cutter head size max. 50 mm End mill size max. 25 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 5 kVA Horizontal milling table Length 620 mm Width 180 mm Distance vertical spindle - milling table min. 50 mm Distance vertical spindle - milling table max. 295 mm T-slots size 12 mm Number of T-slots 3 T-slot spacing 50 mm Load max. 30 kg Accuracy Repeat accuracy ± 0.02 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 95 W Tank capacity 30 l Travel distance X-axis automatic 355 mm Y-axis automatic 190 mm Z-axis automatic 245 mm Vertical spindle Spindle holder BT 30 Speed range 4000 min¯¹ Explanation Speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation Power drive motor continuous operation S1 1.5 kW Power drive motor S6-30 % operation 2.2 kW Torque drive motor continuous operation S1 9.5 Nm Torque drive motor 30% operation S6 14 Nm Feed rate Speed X-axis 10000 mm/min Y-axis 10000 mm/min Z-axis 10000 mm/min Feed motor torque X-axis continuous operation S1 1.9 Nm Y-axis continuous operation S1 3.5 Nm Z-axis continuous operation S1 3.5 Nm

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out with its power, speed, precision, and long service life. • Machine in rigid cast frame design for high stiffness • Carousel tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop facilitates program setup significantly • Coolant system with 70-liter coolant tank • Tool change is automatic or by button press (electropneumatic tool clamping system) • Massive, precision-milled work table – large and precisely ground surface • Large access doors designed to minimize cleaning and maintenance time • LED machine light for complete workspace illumination • SIEMENS options package with material defect liability and free on-site OSS service SINUMERIK 808D • Control-identical software package for process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no homing run required • Higher accuracy Control system • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS options package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Work table horizontal Length 690 mm Width 225 mm Vertical spindle-table distance min. 90 mm Vertical spindle-table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 63 mm Max. load capacity 150 kg Accuracy Repeat accuracy ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle-column distance min. 280 mm Spindle-column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power continuous operation S1 3.7 kW Drive motor power S6-30% duty 5.5 kW Drive motor torque continuous operation S1 24 Nm Drive motor torque 30% duty S6 36 Nm Feed rates X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque X-axis continuous operation S1 3.5 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 6 Nm Tool changer Gedpjymkdxefx Ah Sstw Type: carousel Number of tool stations: 8 Maximum tool diameter: 100 mm Maximum tool length: 200 mm Maximum tool weight: 6 kg Tool-to-tool change time: 7 s

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F 80 CNC milling machine, direct from the manufacturer. F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control is distinguished by performance, speed, precision, and long service life. • Machine base constructed from cast iron for high rigidity • Carousel-type tool changer with 12 tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive in all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel featuring an enabling switch and emergency stop button makes program setup significantly easier • Coolant system with 70-liter coolant tank • Tool change performed automatically or at the push of a button (electropneumatic tool clamping system) • Heavy-duty, high-precision milling table – large dimensions and precision ground finish • Generously dimensioned access doors minimize cleaning and maintenance time • LED machine light for complete illumination of the working area SINUMERIK 808 ADVANCED Compact and robust Communication features: • Front USB port (IP65) • Serial RS232C interface • RJ45 Ethernet on rear panel User-friendly: • Technology-specific keyboard layout • Hard keys with protective membrane Process reliability: • LED tool number display • MCP with rotary switch for feed and spindle override Complete package: • RJ45 Ethernet port Gjdsymkcuopfx Ah Sotw • Prepared for remote maintenance • AST function; allows simple optimization for enhanced dynamic and accuracy requirements • Absolute encoder / no reference run necessary • Higher precision Dimensions and Weight Length: approx. 1995 mm Width/Depth: approx. 1930 mm Height: approx. 1640 mm Weight: approx. 2300 kg Rapid traverse speed X axis: 20 m/min Y axis: 20 m/min Z axis: 20 m/min Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 12 kVA Horizontal Milling Table Length: 800 mm Width: 260 mm Distance vertical spindle – table, min.: 100 mm Distance vertical spindle – table, max.: 550 mm T-slot size: 16 mm Number of T-slots: 5 T-slot spacing: 50 mm Maximum load capacity: 200 kg Accuracy Repeatability: ± 0.01 mm Positioning accuracy: ± 0.01 mm Coolant/Lubricant System Coolant pump drive power: 450 W Tank capacity: 80 l Pneumatic Connection Operating pressure: 7 bar Travel X axis (automatic): 450 mm Y axis (automatic): 260 mm Z axis (automatic): 450 mm Max. spindle–column distance: 370 mm Vertical Spindle Spindle taper: BT 40 Speed range: 50 – 10,000 rpm Note: Maximum spindle speed must be reduced by approx. 20% during continuous operation Drive motor power S1 (continuous duty): 3.7 kW Drive motor power S6-30% duty cycle: 5.5 kW Drive motor torque S1: 24 Nm Drive motor torque S6-30%: 36 Nm Feed Motor Torque X axis S1: 6 Nm Y axis S1: 6 Nm Z axis S1: 11 Nm Tool Changer Design: Carousel Number of tool stations: 12 tools Max. tool diameter: 95 mm Max. tool length: 300 mm Max. tool weight: 8 kg Chip-to-chip tool change time: 7 s

Condition: as good as new (ex-display), Year of construction: 2020, The machine is on display and has only been used for demonstration purposes. Optimill F 120X CNC milling machine, directly from the manufacturer. F 120X – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. - Heavy-duty design - High productivity - Linear guides for high rapid traverse speeds on all axes - 21-position tool changer magazine - High reliability - Meehanite quality cast-iron construction - Cross table, precision-ground with 3 T-slots - Strongly ribbed, torsion-resistant machine base - Precision-ground, preloaded high-performance ball screws on all axes - High-torque servo drives mounted directly on the ball screws on all three axes - Electronic handwheel - Chip conveyor - Cleaning pistol - RJ45 connection, USB port, and power connection (230V) - Coolant system with 210-litre coolant tank - Heat exchanger Included options: - PPU 290 touch panel - 16,000 rpm inline spindle with oil cooler - Belt conveyor with chip trolley Machine leasing available via Siemens Finance; liquidity required. Dimensions and Weights - Length approx. 2,315 mm - Width/depth approx. 2,194 mm - Height approx. 2,325 mm - Weight approx. 3,800 kg Drilling/Milling Capacity - Maximum cutter head size: 80 mm Feed/Rapid Traverse Speed Gtedpfxsymkbqo Ah Sew - X-axis: 40,000 mm/min - Y-axis: 40,000 mm/min - Z-axis: 40,000 mm/min Electrical Data - Connection voltage: 400 V - Number of phases: 3 - Current type: AC - Mains frequency: 50 Hz - Electrical connection - Total connected load: 45 kVA Vertical Spindle to Table Distance - Minimum: 150 mm - Maximum: 450 mm T-slot Size: 14 mm Number of T-slots: 3 T-slot pitch: 125 mm Maximum table load: 250 kg Accuracy - Repeatability: ± 0.006 mm - Positioning accuracy: ± 0.005 mm Coolant System - Coolant pumps - Each pump drive power: 370 W - Tank capacity: 120 l Control - Type: Sinumerik 828D PPU 290 - System software: SW 28x - CNC memory: 8 MB - Block change time: 2 ms - Look ahead: 150 - Number of tools: 512 Travel Range - X-axis, automatic: 500 mm - Y-axis, automatic: 400 mm - Z-axis, automatic: 300 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 10 – 16,000 rpm - Main drive power (continuous S1): 12 kW - Main drive power (S6-30% operation): 22.8 kW - Main drive torque (continuous S1): 38 Nm - Main drive torque (30% operation S6): 116 Nm Feed Motor Torque - X-axis, continuous S1: 6 Nm - Y-axis, continuous S1: 6 Nm - Z-axis, continuous S1: 11 Nm Servo Tool Changer - Design: Carousel in front of the spindle - Number of tool stations: 21

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine, direct from the manufacturer. F110 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle with belt drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 7.5 kW Torque of drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque of drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Gtodpfx Ahjymkbkj Sow Coolant System Coolant pump output: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (neighboring tool pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel (Axis Movement) X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z-axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z-axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z-axis: 3.67 kN / 3.67 kN / 6.68 kN Spindle Speed Range Speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Distance spindle to table: 100–600 mm Table length x width: 800 x 400 mm T-slot size / number / pitch: 18 mm / 3 / 100 mm Max. payload: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guides with ball screw drive for high rapid traverse speeds on all axes Telescopic guideway covers on all three axes Automatic lubrication system Portable electronic handwheel with enabling switch and emergency stop button RJ45 interface and 230 V power outlet Work area machine lamp Cleaning pistol Ball screws and linear guides from THK Chip flushing system Cooling at the spindle head (machining area) Control cabinet Arm-type tool changer SW24 CE *More options available

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F 110 E CNC milling machine, direct from the manufacturer. F 110 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D control, stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with ball circulation for high rapid traverse speeds on all axes • Powerful servo drives on all three axes • Telescopic covers on all guideways • Automatic lubrication • Spindle oil cooler • Solid, precision-ground milling table with three oversized T-slots • The portable electronic handwheel with enabling button and emergency stop switch greatly facilitates program setup • Coolant system with chip flushing and cleaning gun • Chip conveyor with auger design • Chip cart • RJ45 interface and 230 V power connection • Enclosed electrical cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dirt particles • Machine lamp providing over 500 Lux in the working area RJ45 Ethernet port 8.4” LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function: enables easy optimization for higher requirements in dynamics and accuracy Absolute encoder / no reference run necessary Higher accuracy Travel distances: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and weights Length approx. 2,100 mm Width/depth approx. 2,300 mm Height approx. 2,750 mm Weight approx. 4,100 kg Boring/milling performance Max. cutter head size: 90 mm Electrical data Connection voltage: 400 V Network frequency: 50 Hz Electrical connection Total connected load: 20 kW Gtsdpfxjymkbde Ah Sew Horizontal milling table: Length: 850 mm Width: 400 mm Distance spindle nose to table min.: 100 mm Distance spindle nose to table max.: 600 mm T-slot size: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum load capacity: 400 kg Accuracy Repeat accuracy: ±0.005 mm Positioning accuracy: ±0.005 mm

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. Gtjdpfsymka Hex Ah Sew F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal - Chip trolley - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 600 mm Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg