Used Optimum Opti S210 G for sale (107)

Condition: new, Optimum OPTIturn TH 3610D mechanic lathe Bwjhxeg Ryt Ajznaqjl Completely equipped mechanic's lathe. TH 3610D with digital position indicator DPA 21 Optimum dealer - please ask for our best offer! Hardened and ground Z-axis guideway Spindle mounting Camlock DIN ISO 702-2 No. 5 Precisely machined slide Handwheels with adjustable fine scaling 0.04 / 0.02 mm Quadruple steel holder All guideways adjustable by means of taper bars Main spindle running in oil bath Gear wheels smooth-running, hardened and ground Guaranteed concentricity of spindle nose better than 0.015 mm Gear wheels and shafts hardened and ground, running in oil bath in precision bearings Handwheels decoupled and tested according to EN 23125 Safety handwheels with push-out function in X- and Z-axis Two-channel right-left switch tested according to EN 23125 Switch with life cycle calculation, tested according to EN ISO 13849 Motor protection switch, lockable main switch Right/left rotation switchable on bed slide Lead screw cover Tailstock for taper turning adjustable ± 10 mm Tailstock quill and handwheel with adjustable fine scaling 0.025 mm Quick, easy and tool-free adjustment by means of clamping lever Heavily ribbed prismatic bed, inductively hardened and precision ground Machine base with tool compartments on both sides Emergency stop device with foot actuation Pull-out chip tray with guide rails LED machine lamp integrated in chip guard TH 3610D: Digital position display DPA 21 User-friendly membrane keyboard, splash-proof, closed and glare-free Glass scales TECHNICAL DATA Dimensions and weights Length (product) approx. 1930mm Height (product) approx. 1620mm width/depth (product) ca. 725mm weight (net) ca. 572kg Working range Center height 180mm Swing diameter in bed bridge 516mm Center width 980mm Turning length in the bed bridge 160mm Swing over machine bed 356mm Bed width 187mm Speed range Number of speed ranges 8 Speed range 70 - 2000min¯¹ Electrical data Power drive motor 1,5kW Mains frequency 50Hz Supply voltage 400V Spindle Spindle mounting Camlock DIN ISO 702-2 No. 5 Spindle cone MK 6 spindle bore/rod passage diameter 52mm steel holder mounting height max. 16mm Tailstock Tailstock mount MK 3 Tailstock quill diameter 42mm Tailstock quill stroke 120mm Pitch Pitch Metric 0.4 - 7mm/rev Pitch Inch 56 - 4Gg/1" Number of pitches metric 26 Number of pitches inch 34 Travel Travel X-axis 100mm Travel Y-axis 170mm Feed rate Feed range longitudinal 0.052 - 1.392mm/rev Feed range planar 0.014 - 0.38mm/rev Number of feeds longitudinal 32 Number of feeds planar 32 SCOPE OF DELIVERY Fixed steady rest passage max. Ø 100 mm Travelling steady rest passage max. Ø 95 mm LED machine light Reducing sleeve MK 6 / MK 3 Two fixed centering tips MK 3 Quadruple steel holder Change gear set Machine base Machine initial filling with quality oil Operating tool Do not forget the lathe chuck!

Condition: new, Year of construction: 2025, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bwehxznajv Sg T Neqjl Bi-metal saw blade Machine base

Condition: new, Year of construction: 2024, Functionality: fully functional, OPTIturn TH 3309D Lead and Feed Screw Lathe Manufacturer: Optimum Model: OPTIturn TH 3309D Year of Manufacture: 2024 Condition: New machine Delivery Time: Available immediately (subject to prior sale) Dimensions and Weight Length: approx. 1685 mm Width/Depth: approx. 745 mm Height: approx. 1590 mm Net Weight: 512 kg Working Areas Center Height: 165 mm Distance Between Centers: 830 mm Swing Over Bed: 330 mm Swing Over Cross Slide: 208 mm Turning Length in Bed Bridge: 430 mm Speed Range Bjhxznevu Aryeaqewl Number of Speed Ranges: 16 Speed Range: 70 – 2000 min⁻¹ Electrical Specifications Motor Power: 1.5 kW Connection Voltage: 400 V Frequency: 50 Hz Spindle Spindle Mount: Camlock DIN ISO 702-2 No. 4 Spindle Bore/Rod Passage Diameter: 38 mm Max. Tool Holder Height: 16 mm Spindle Taper: MT 5 Tailstock Tailstock Taper: MT 3 Tailstock Quill Travel: 110 mm Tailstock Quill Diameter: 32 mm Thread Cutting Metric Thread Pitch Range: 0.4 – 7 mm/rev (26 pitches) Imperial Thread Pitch Range: 56 – 4 TPI (34 pitches) Travel Top Slide Travel: 98 mm Cross Slide Travel: 164 mm Carriage Travel: 695 mm Feed Rates Longitudinal Feed Rate: 0.052 – 1.392 mm/rev (32 feed rates) Cross Feed Rate: 0.014 – 0.38 mm/rev (32 feed rates) Included Accessories Steady Rest (Ø 6 - Ø 50 mm) Follow Rest (Ø 8 - Ø 30 mm) LED Machine Light Reducing Sleeve MT 5 / MT 3 Two Fixed Center Points MT 3 Four-Position Tool Holder (16 mm) Change Gear Set Machine Base Initial Filling with High-Quality Oil Operating Tools Additional Accessories Further accessories available on request. Price and additional technical data available upon request.

Year of construction: 2015, Condition: used, Empty weight: 1.400 kg Dimensions (LxBxH): 140 x 138 x 200 cm - Year: 2015 - Documentation available: Yes - CE mark available: Yes Bwjhxjv Stkuoznaqsl - Control: CNC - Motor power: 1.5kW - Transport dimensions: 1400mm x 1380mm x 2000mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: new, Year of construction: 2025, turning diameter over cross slide: 270 mm, spindle bore: 58 mm, turning diameter: 460 mm, center height: 230 mm, center width: 1,060 mm, quill stroke: 130 mm, quill diameter: 60 mm, total length: 2,280 mm, total width: 1,150 mm, total height: 1,650 mm, Turning diameter in gap: 690 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 25 rpm, overall weight: 1,910 kg, quill mount: MK 4, metric thread pitch (max.): 14 mm, tailstock quill diameter: 60 mm, Optimum TH 4610D center lathe with DPA 31 Plus digital position indicator and quick-change tool post Hardened and ground Z-axis guideway Guaranteed spindle nose concentricity ≤ 0.015 mm Shafts, gears, and main spindle run in an oil bath Lead screw cover Precisely machined slide All guideways adjustable via V-ledges Mechanical longitudinal feed shutoff of the bed slide with four adjustable eccentrics Right/left rotation on the bed slide can be switched via a switch spindle Central lubrication in the bed slide Top slide adjustment range ± 90° Smooth-running, hardened, and ground gears mounted on two adjustable precision tapered roller bearings Switch with life cycle calculation, tested according to EN ISO 13849 Large chip guard with integrated LED Machine lamp Handwheels with adjustable fine scales of 0.04 / 0.02 mm Safety handwheels with disengagement function according to EN23125 on the X and Z axes Quick-action feed gears in a closed design, gears and shafts hardened and ground, running in an oil bath on precision bearings Adjustable thread dial scale Tailstock for taper turning adjustable ± 10 mm Tailstock sleeve and handwheel with adjustable fine scale of 0.025 mm Quick, easy, and tool-free adjustment of the tailstock using a clamping lever Cable routing via energy chain Heavily ribbed prismatic bed, induction-hardened and precision-ground from gray cast iron Coolant system with separate coolant tank with level indicator and oil separator; Easy and complete emptying and cleaning according to DIN standards Emergency stop device with foot operation Scope of delivery: Bwehxswaaf Hjznaqsl Fixed steady rest, opening Ø 25 - Ø 178 mm Revolving steady rest, opening Ø 19 - Ø 114 mm LED machine light Adapter MK6-MK4 Non-revolving center MK4 Non-revolving, but temperature-resistant center MK4 Quick-change tool holder SWH 5-B Tool holder 25 x 120 Type D for 20 mm square chisel Thread gauge Set of interchangeable gears Gears for thread gauge (metric) Initial machine filling with high-quality oil Operating tools Options available upon request; we will be happy to advise you: - Three-jaw chuck / four-jaw chuck - Steel reamer / turning tool - Mounting elements - Commissioning Do you need a different machine? Please contact us!

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 Bwohxzetv Riajnaqjl - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Condition: new, Optimum OPTImill MZ 2S tool milling machine With digital 3-axis position display DP 700 from NEWALL. With inverter drive of the feed axes controllable from the control panel. Versatile application range Excellent damping characteristics and stability of the machine frame All guideways hardened and precision ground and adjustable by means of taper bars Automatic feed in X, Y and Z axes, infinitely adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screw in all axes Central and clearly arranged control panel with integrated digital position and speed display Massive cross table, large dimensioned and precisely surface machined with 5 T-slots Coolant device Large dimensioned handwheels with scale Machine lamp Bwshxzofnh Sgsnaqel Quiet running Manual central lubrication TECHNICAL DATA Dimensions and weights Length (product) approx. 1239mm width/depth (product) approx. 1168mm Height (product) approx. 1900mm weight (net) approx. 1400kg Drilling-milling head milling head swivel range ± 90 Drilling-milling capacity cutter head size max. 100mm drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 26mm End mill size max. 25mm Electrical data Power drive motor 2,2kW Supply voltage 400V Mains frequency 50Hz Horizontal milling table Horizontal milling table length 750mm Horizontal milling table width 320mm distance vertical spindle - horizontal milling table min. 75mm distance vertical spindle - horizontal milling table max. 410mm Horizontal milling table T-slots size 14mm Horizontal milling table T-slots number 5 Horizontal milling table T-slots distance 63mm Distance horizontal spindle - horizontal milling table min. 70mm Distance horizontal spindle - horizontal milling table max. 400mm Horizontal milling table load max. 285kg Milling table vertical Vertical milling table length 830mm Vertical milling table width 250mm Vertical milling table T-slots size 14mm Vertical milling table T-slots number 2 Vertical milling table T-slots distance 63mm Coolant system Coolant pump(s) Drive power 95W Travel Travel X-axis manual 400mm Travel Y-axis manual 200mm travel Z-axis manual 335mm Travel X-axis automatic approx. 310mm Travel Y-axis automaticapprox. 160mm Travel Z-axis automatic 295mm Vertical spindle Vertical spindle throat 100mm Vertical spindle Spindle mounting ISO 40 DIN 2080 Vertical spindle speed range 50 - 1890min¯¹ Vertical spindle number of speed ranges 12steps Vertical spindle tightening rod M 16 Vertical spindle quill stroke 120mm Vertical spindle load max. 1100Nm Feed speed Feed speed X-axis 10 - 600mm/min feed speed Y-axis 10 - 600mm/min feed speed Z-axis 10 - 600mm/min Electrical connection Total connected load 4kW Motor(s) rapid traverse X-axis power drive motor 0,375kW rapid traverse Y-axis power drive motor 0,375kW Rapid traverse Z-axis power drive motor 0.375kW SCOPE OF SUPPLY: Adapter ISO 40/MK3 adapter MK1 and MK 2 Milling spindle horizontal milling Ø 27 mm Operating tool

Condition: used, Technical details: cutting diameter: 260 mm saw band length: 4640 mm saw band width: 34 mm total power requirement: 1,5 kW machine weight approx.: 800 kg Bandsäge - Halbautomat Bwohjv T Tcmjxznaqjl schwere Industriebandsäge mit Rollenbahn Gehrungsschnitt möglich hydr. Werkstückklemmung i.D. *

Condition: new, Year of construction: 2024, Functionality: fully functional, Metal Band Saw OPTIsaw S 275NV Bwjhxznovkcztoaqjl Description: Quiet operation Sturdy cast construction High cutting accuracy due to vibration-free operation Adjustable lowering of the saw bow via hydraulic cylinder with throttle valve Microswitch for automatic shut-off at the end of the cut Coolant system included Equipped with a high-quality bi-metal saw blade as standard Adjustable material stop for series work Robust machine base Ball-bearing saw blade guide Quick-action vise adjustable via handwheel Clamping of the workpiece with a convenient quick-action lever Easy-to-read scale for angle adjustment Overload protection S 275NV Features: Infinitely adjustable saw blade speed: 20 - 90 m/min Speed adjustment possible during operation Pressure gauge for easy and correct saw blade tension adjustment Technical Data: Dimensions and Weights: Length (product): approx. 1400 mm Width/Depth (product): approx. 685 mm Weight (net): approx. 185 kg Max. Width/Depth (product): approx. 985 mm Max. Height (product): approx. 1700 mm Electrical Data: Drive motor power: 1.5 kW Connection voltage: 230 V Frequency: 50 Hz Coolant pump motor power: 90 W Machine Data: Saw blade speed: 20 – 90 m/min Saw blade length: 2480 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 60° Feed: Infinitely adjustable Raising of the saw bow: Manual Cutting Ranges: Cutting range at 0° round (solid material): 225 mm Cutting range at 0° square (solid material): 190 mm Cutting range at 0° rectangle lying (solid material): 150 x 245 mm Cutting range at +45° round (solid material): 145 mm Cutting range at +45° square (solid material): 150 mm Cutting range at +45° rectangle lying (solid material): 190 x 150 mm Cutting range at +60° round (solid material): 90 mm Cutting range at +60° square (solid material): 90 mm Cutting range at +60° rectangle lying (solid material): 120 x 90 mm Note on cutting range: The cutting range is determined based on the weight of the saw bow with aluminum. It may vary with different materials and could be smaller (not cutting capacity). Accessories: Material stop Bi-metal saw blade Machine base Coolant pump Price: Available on request

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 270 mm z-travel 430 mm 630 mm table-size 1120 x 270 mm spindle turning speed range 45 - 1660 U/min spindle taper SK 40 control konventionell spindle motor 2,2 kW total power requirement 2,4 KVA weight of the machine ca. 1,35 t dimensions 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet Bjhxznov Sdz Rsaqowl

Condition: reconditioned (used), Year of construction: 2018, Functionality: fully functional, turning diameter over cross slide: 146 mm, turning length: 600 mm, turning diameter: 350 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 540 mm, feed rate X-axis: 600 m/min, feed rate Z-axis: 800 m/min, center height: 165 mm, Equipment: rotational speed infinitely variable, CNC-controlled lathe with linear guide Built in 2018, with few operating hours !!! including current maintenance and test report !!! - Precise workmanship - Spindle and feed motors from Siemens - Braced machine bed made of gray cast iron - Maintenance-friendly protective housing - Ground ball screw spindles - Elaborate spindle bearings - Linear guide in both axes - Central lubrication - Rear access flap for maintenance - Turning turret is located behind the turning center (left turning tool) SINUMERIK 808 ADVANCED Thanks to a panel-based CNC design with few interfaces and an operator panel with protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. 8.4” LCD color display with 800 x 600 resolution Technical data Weight (net) approx. 1200 kg Working areas Lathe chuck diameter 160 mm Center height 165 mm Center distance 600 mm Swing diameter over machine bed 350 mm Swing diameter over cross slide 146 mm Bed width 208 mm Speed range 30 – 3500 min¯¹ Drive motor power 3.7 kW Repeatability ± 0.01 mm Positioning accuracy ± 0.01 mm Spindle mount ISO 702-1 No. 4 - Form A2 Spindle bore/bar passage diameter 46 mm Tailstock mount MK 3 Tailstock Quill stroke 120 mm Quill diameter 45 mm Travel path Travel path X-axis 185 mm travel path Z-axis 540mm Feed rate X-axis 6000mm/min Feed rate Z-axis 8000mm/min Tool changer type electric Tool changer positions 6pcs. Holding height, width square max. 16 x 16mm Boring bar max. 16mm Connection value 6.5kVA Bwehxznasvmgnisqjl The CNC lathe comes from a training center and has not been used much there. It has been serviced by the manufacturer. The current maintenance and inspection report is enclosed. The machine is in our demonstration center in Chemnitz and can be viewed at any time. We are happy to help with transport, assembly and instruction.

Year of construction: 2025, Condition: new, Motor power: 1,1kW / 400V Cutting area: 100mm x 145mm Bwohxznoha Nz Ujaqel Coolant device: Yes Feed: stepless Saw band speed: 45 /90 m/min Saw band dimension: 2480 x 27 x 0.9 mm Cutting angle: 0° to 60 Dimension: 1400mm x 685mm x 1235mm Weight: 185kg

Condition: new, Optimum OPTIsaw SD 351 AV Semi-automatic double miter metal band saw With Siemens inverter drive. Professional and robust saw with a cutting capacity of up to 350 mm Description: Heavy industrial design Quiet running Manual or semi-automatic operation Infinitely adjustable saw band speed from 0-80 m/min. High cutting accuracy thanks to vibration-free operation Miter adjustment up to 60° by swiveling the entire saw frame With high-quality bi-metal saw blade as standard End stops adjustable to the degree chip brush Micro switch for automatic limit switch Roller support adjustable for long and heavy workpieces coolant pump Ball-bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed using the feed control valve on the control panel Generously dimensioned, hydraulic quick-release vice, self-closing, adjustable for large cross-sections Fully equipped machine; The user can work productively immediately after commissioning EMC class C2 2-channel safety chain with emergency stop Converter Siemens Sinamics G110M Functionality semi-automatic operation Closing the vise and activating the motor Lowering the saw frame for cutting The motor stops and the saw arm returns to the starting position Technical specifications: Dimensions and weights: Length (product) approx.: 1935mm Width/depth (product) approx.: 1425mm Height (product) approx.: 1626mm Weight (net) approx.: 600kg Electrical data: Power drive motor: 2.2kW Connection voltage: 400V Mains frequency: 50Hz Engine power hydraulic pump: 1.4kW Engine power coolant pump: 50W Total connection value: 3.8kW Machine data: Saw band speed(s): 15 - 100m/min Speed levels: continuously adjustable Bwehedc H Uksxznaqol Saw band length: 2925mm Saw band width: 27mm Saw band thickness: 0.9mm Cutting angle: -45 – +60° Manual operation: hydraulically via push button Semi-automatic operation: automatic Cutting areas: Cutting range 0° round (solid material): 270mm Cutting range 0° square (full material): 230mm Cutting range 0° standing rectangular (solid material): 230 x 350mm Cutting range -45° round (solid material): 230mm Cutting range -45° square (full material): 170mm Cutting range -45° standing (solid material): 140 x 200mm Cutting range +45° round (solid material): 230mm Cutting range +45° square (full material): 200mm Cutting range +45° standing rectangular (solid material): 210 x 220mm Cutting range +60° round (solid material): 140mm Cutting range +60° square (full material):140mm Cutting range +60° standing (solid material): 140 x 220mm

Year of construction: 2015, Condition: ready for operation (used), Center height: 230mm, center width: 1060mm, orbital diameter over bed/plane slide/bed bridge: 460mm/270mm/690mm, turning length in the bed bridge: 240mm, bed width: 300mm. Spindle bore: 58mm, spindle taper: MK6, speed: 2000rpm, travel X/Z: 125mm/285mm, tailstock mount: MK4, quill diameter: 60mm, quill stroke: 130mm. Machine dimensions X/Y/Z: approx. 2250mm/1100mm/1550mm, weight: approx. 1700kg. Documentation available. On-site inspection is possible. Bwshsv Rp R Iexznaqjl

Year of construction: 2010, Condition: excellent (used), Coolant pump Make Optimum Canister : 370 x 250 x H.170 mm Type 3352001 Motor 32 W/400 V -50 Hz min.2800 Bwohxofdzzusznaqjl Amp.0,08 Series BJ 201006

Condition: used, Technical details: x-travel: 200 mm y-travel: 450 mm z-travel: 460 mm control: Siemens 802S base line spindle taper ISO: ER 32 spindle head swivable left - right: nein ° turning speed range: 150 - 8600 U/min feed:: X/Y/Z: 2000 - stufenlos mm/min table surface area: 750 x 210 mm interface: 232 total power requirement: 3 kVA weight approx.: 760 kg dimension machine xH: 1,9 x 1,2 x 2,1 m Table movement: X-axis: 200mm and Y-axis: 450mm spindle vertical Z-axis: 460mm max. tool holder milling cutter: Ø 20mm drilling capacity ST: Ø 13mm max. distance spindle-table: 470mm Equipment: Bwehxzneu Ndcajaqsl Manual control unit cooling system central lubrication machine interior lighting Machine feet *

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.1750mm Width/depth (product): approx.1075mm Height (product): approx.1420mm Weight (net): approx.550kg Width/depth max. (product): approx.1415mm Max. height (product): approx.2000mm Electrical data: Power drive motor: 2.2kW Supply voltage: 400V Mains frequency: 50Hz Motor power coolant pump: 0.05kW Machine data: Saw blade speed(s): 36 / 72m/min Saw blade length: 2925mm Saw blade width: 27mm Saw blade thickness: 0.9mm Cutting angle: -45 - +60° Feed: infinitely adjustable Lifting of the saw bow: manual Cutting ranges: Cutting range 0° round (solid material): 270mm Cutting range 0° square (solid material): 230mm Cutting range 0° rectangular horizontal (solid material): 230 x 350mm Cutting range -45° round (solid material): 230mm Cutting range -45° square (solid material): 170mm Cutting range -45° rectangular horizontal (solid material): 140 x 200mm Cutting range +45° round (solid material): 230mm Cutting range +45° square (solid material): 200mm Cutting range +45° rectangular horizontal (solid material): 210 x 220mm Cutting range +60° round (solid material): 140mm Cutting range +60° square (solid material):140mm Cutting range +60° rectangular horizontal (solid material): 140 x 220mm Bwehxzerah R Tenaqel

Condition: new, OPTIsaw S 275NV swing frame - metal band saw Description Metal band saw with swivelling saw bracket. S 275NV with adjustable blade speed Bohedc H Sioxznaqjwl -Quiet running -Stabile casting -High cutting accuracy due to vibration-free running As the saw bar hydraulic cylinders with adjustable restrictor valve Micro switch for automatic shut-off Coolant system -Equipped with high-quality bi metal blade -Adjustable material stop for serial works -Sturdy machine base -Ball bearing blade Guide Quick clamping Vice adjustable via Handwheel. Secure the workpiece with handy quick-release lever Good readable scale for angle adjustment Overload protection S 275N Motor protection switch Two reversible speed S 275NV -Infinitely variable blade speed 20-90 m / min. Speed change during operation possible Pressure gauge Simple and proper adjustment of blade tension

Year of construction: 2017, Condition: ready for operation (used), A conventional double-spindle universal milling machine Optimum is available. Drilling capacity in steel (S235JR): 30mm, continuous drilling capacity in steel (S235JR): 28mm, max. cutter head diameter: 100mm, max. end mill diameter: 20mm. Vertical spindle mount: ISO50, speed: 1750 rpm, spindle table distance: 140mm-540mm, swivel range X-Y/Z-X: 360°/90°. Horizontal spindle holder: ISO50, speed: 1800 rpm, spindle-table distance: 0mm-400mm. Table dimensions X/Y: 1600mm/360mm, max. table load: 450kg, travel X/Y/Z: 1290mm/280mm/400mm, feed X/Y/Z: 420mm/min/393mm/min/168mm/min, rapid traverse X/Y/Z: 1290mm/min/1205mm/min/513mm/min. Machine dimensions X/Y/Z: approx. 3350mm/2200mm/1950mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible. Bohxjv Rp Rueznaqswl

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Behxerah S Hsznaqswl Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Year of construction: 2014, Condition: ready for operation (used), Travel X/Z: 185mm/540mm, feed X/Z: 6m/min/8m/min, repeat accuracy: +/-0.015mm, positioning accuracy: +/-0.03mm, tool positions: 8, spindle bore: 46mm, center distance: 800mm, center height: 170mm, orbital diameter over bed/face slide: 340mm/152mm, bed width: 208mm, speed: 4000rpm, lathe chuck diameter: 160mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 1200kg, control: Siemens Sinumerik 808D. Documentation available. On-site inspection is possible. Bwshxznev Rfr Usaqjl

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.1400mm Width/depth (product): approx.685mm Height (product): approx.1300mm Weight (net): approx.185kg Max. length (product): approx.1700mm Width/depth max. (product): approx.985mm Max. height (product): approx.1700mm Electrical data: Power drive motor: 1.5kW Supply voltage: 400V Mains frequency: 50Hz Motor power coolant pump: 100W Machine data: Saw blade speed(s): 15 - 100m/min Saw blade length: 2480mm Saw blade width: 27mm Saw blade thickness: 0.9mm Cutting angle: 0 - 60° Feed: infinitely adjustable Lifting of the saw bow: manual Standards and approvals: EMC class: C2 Cutting ranges: Bsherah Hwsxznaqjwl Cutting range 0° round (solid material): 225mm Cutting range 0° square (solid material): 190mm Cutting range 0° rectangular upright (solid material): 150 x 245mm Cutting range +45° round (solid material): 145mm Cutting range +45° square (solid material): 150mm Cutting range +45° rectangular upright (solid material): 190 x 150mm Cutting range +60° round (solid material): 90mm Cutting range +60° square (solid material): 90mm Cutting range +60° upright rectangular (solid material): 120 x 90mm

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Drilling table work surface length: 387 mm Drilling table work surface width: 387 mm Drilling table type of T-slots: diagonal Drilling table T-slot size: 14 mm Drilling table T-slot number: 2 Max. distance spindle - drilling table: 775 mm Speed range: Speed range: 70 - 2800 min ̄1 Number of speed ranges: 9 steps Bwohxsq T Rx Eeznaqsl Speed control: infinitely variable Electrical data: Drive motor power: 1.1 kW Supply voltage: 400 V Mains frequency: 50 Hz Machine base: Distance spindle - machine base max.: 1300 mm Machine foot working surface length: 270 mm Machine foot working surface width: 327 mm Machine foot T-slot size: 16 mm Machine foot T-slots quantity: 2 Machine foot T-slot distance: 150 mm Spindle: Quill stroke: 125 mm Spindle holder: MK 4 Projection: 270 mm Drill head rotation: 360 ° Drill head inclination: 45 °

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Dimensions and weights: Column diameter: 150mm Length (product): approx.880mm Width/depth (product): approx.595mm Height (product): approx.2445mm Weight (net): approx.550kg Drilling capacity: Drilling capacity steel (S235JR): 40mm Continuous drilling capacity steel (S235JR): 35mm Tapping steel (S235JR):M 30 Drilling table: Drilling table work surface length: 530mm Drilling table work surface width: 530mm Drilling table T-slot size:18mm Drilling table T-slot number: 3 Drilling table T-slot spacing: 125mm Drilling table rotation: 360 Drilling table inclination: ± 90 Load capacity drilling table: 250kg Distance spindle - drill table max.:740mm Distance spindle - drill table min: 130mm Speed range: Speed range: 30 - 2430min¯¹ Number of speed ranges: 4 steps Speed control: electronic Electrical data: Drive motor power: 2.2kW Supply voltage: 400V Mains frequency: 50Hz Machine base: Distance spindle - machine base max.: 1210mm Machine base working surface length: 435mm Machine foot working surface width: 445mm Machine foot T-slot size: 18mm Machine foot T-slots quantity: 2 Machine foot T-slot distance: 150mm Spindle: Quill stroke: 170mm Spindle holder: MK 4 throat: 350mm Quill feed: automatic Quill feed speed: 0.1 - 0.2mm/rev Speed levels quill feed: 3 levels Bwshxoq T Ry Usznaqol Motor(s): Coolant pump Power drive motor: 100W

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Dimensions and weights: Length (product): approx.1760mm Width/depth (product): approx.745mm Height (product): approx.1320mm Weight (net): approx.469kg Max. height (product): approx.1590 (DPA)mm Working ranges: Center height: 165mm Center width: 1000mm Rotation diameter over machine bed: 330mm Swing diameter over cross slide: 216mm Bed width: 190mm Speed range: Number of speed ranges: 9 steps Speed range: 65 - 2000min¯¹ Electrical data: Drive motor power: 1.5kW Supply voltage: 400V Mains frequency: 50Hz Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 4 Spindle bore/bar passage: Diameter 38mm Steel holder max. mounting height: 16mm Spindle cone: MK 5 Tailstock: Tailstock holder:MK 3 Tailstock quill stroke: 100mm Tailstock quill diameter: 38mm Pitch: Pitch metric: 0.4 - 10mm/rev Number of leads metric: 29 Pitch inch: 56 - 4Gg/1" Travel distance: Top slide travel: 90mm Travel of face slide: 168mm Bed slide travel: 850mm Feed rate: Feed range longitudinal:0.02 - 0.4mm/rev Number of longitudinal feeds: 24 Feed range flat: 0.01 - 0.2mm/rev Number of feeds flat: 32 Bwohxznaeq T R Aajqel